AXIS TQ6501-E Parapet Mount for PTZ | 02110-001
$389.40
FREE DELIVERYWARRANTY GUARANTEED
✔ Dedicated 5★ Customer Care Team ✔ Fast & Responsive Tech Support
AXIS TQ6501-E Parapet Mount for PTZ | Outdoor-Ready | Heavy-Duty
The AXIS TQ6501-E delivers a robust mounting solution designed for securing PTZ cameras to parapet walls and ledges. Built for outdoor environments, it provides solid, stable support for professional-grade surveillance installations where standard wall or pole mounts are not suitable. Featuring heavy-duty construction, it is suited to demanding installation conditions that require a reliable and secure camera position.
For installers positioning PTZ cameras on parapet walls and elevated building edges, the AXIS TQ6501-E Parapet Mount provides a purpose-built solution where standard wall or pole mounts are not practical. Designed to clamp and anchor securely to parapets and ledges, this mount gives PTZ units a stable elevated platform to achieve clear, unobstructed sightlines across perimeters, entryways and open approach zones. Featuring heavy-duty construction suited to outdoor environments, the TQ6501-E is built to carry the physical load of PTZ cameras while resisting the environmental stress of exposed exterior installations. It integrates with compatible Axis PTZ models and existing Axis mounting hardware to simplify commissioning on commercial and institutional sites. This makes it well suited to professional surveillance projects where parapet placement is the only viable option for the coverage angles required.
Key Capabilities
Parapet and Ledge Mounting
Specifically shaped to attach to parapet walls and elevated ledges, this mount fills the gap where flush wall mounts and pole mounts cannot be used. It gives installers a reliable anchoring point at building edges without requiring structural modifications.
Elevated PTZ Positioning
By raising the camera above the parapet edge, the TQ6501-E expands the PTZ field of view across approach paths, perimeters and open areas. Elevated placement reduces blind spots caused by walls, fencing and ground-level obstructions.
Heavy-Duty PTZ Support
Engineered to bear the weight of full-size PTZ camera units, this mount maintains firm alignment once installed. Rigid support prevents camera drift or vibration that could compromise pan, tilt and zoom precision over time.
Outdoor-Ready Construction
Built for exposed exterior installation, the TQ6501-E uses durable, weather-resilient materials suited to Australian outdoor conditions. This supports long-term structural integrity on building edges without regular maintenance intervention.
Best For
Parapet Wall Installations: Directly addresses the common challenge of mounting PTZ cameras on building edges and ledges where no vertical wall surface is available for standard brackets.
Wide-Area Perimeter Surveillance: Elevating a PTZ camera on a parapet extends its reach across yards, car parks and building frontages, making full use of the camera’s pan, tilt and zoom range.
Commercial and Institutional Sites: Suited to sites such as office complexes, transport hubs and industrial facilities where architectural parapets are the most practical mounting point for elevated PTZ coverage.
Why Choose the AXIS TQ6501-E
The TQ6501-E is not a universal camera bracket: it is a purpose-engineered parapet mount designed specifically around the demands of PTZ camera installations on building edges. A generic bracket placed on a parapet is unlikely to provide the load capacity, alignment stability or integration compatibility that a full-size PTZ unit requires for reliable long-term operation. The TQ6501-E is built heavy-duty to carry PTZ loads, weather-resilient for outdoor exposure and designed to integrate cleanly with compatible Axis PTZ camera models and mounting hardware. For professional installers who need a manufacturer-matched solution that maintains camera alignment and structural stability at elevated parapet positions, this mount avoids the compromises that come with improvised alternatives. Available at Security Wholesalers, the TQ6501-E is part number 02110-001 and is sourced as a genuine Axis accessory.
Buyer Decision Tips
Buyer Tip: Before ordering, confirm that your specific Axis PTZ camera model is listed as compatible with the TQ6501-E. Axis designs mounts to pair with specific camera families, and using a mismatched bracket can affect both the physical fit and the cable management routing. Check the Axis compatibility list or consult the product datasheet to verify your PTZ model is supported before installation.
Key Features & Technical Specifications
Product Name
AXIS TQ6501-E Parapet Mount for PTZ
Part Number
02110-001
SKU
TQ6501-E
Mount Type
Parapet and ledge mount for PTZ cameras
Compatible Cameras
Designated Axis PTZ camera models
Installation Surface
Parapet walls, ledges, elevated building edges
Environment
Outdoor use
Construction
Heavy-duty, weather-resilient materials
Load Capacity
Designed to support PTZ camera units
Brand
Axis Communications
Product Category
AXIS Mounts and Brackets
Ideal Use Cases
Commercial Building Perimeters
Parapet edges on multi-storey commercial buildings are a natural elevated vantage point for PTZ cameras. The TQ6501-E secures the camera above the building edge to monitor entrances, façades and surrounding ground-level activity.
Industrial Yards and Boundaries
Warehouses and industrial facilities with flat-roofed structures benefit from parapet-mounted PTZ cameras that can sweep across loading areas, yard boundaries and vehicle movement zones from a fixed elevated position.
Transport and Transit Hubs
Terminals, stations and transit facilities often feature parapet architecture along platforms and covered walkways. The TQ6501-E enables PTZ cameras to be positioned above these edges for wide-area coverage of passenger flow and access routes.
Public and Civic Infrastructure
Councils, government buildings and public facilities with parapet-edged rooflines can use this mount to deploy PTZ cameras at height, supporting broad exterior monitoring without requiring separate pole or wall structures.
Choosing the Right Model
Choose this model if: You are mounting a compatible Axis PTZ camera on a parapet wall or elevated ledge and need a manufacturer-matched, heavy-duty bracket that is built for outdoor exposure and designed to maintain precise camera alignment at height.
Choose a different model if: Your installation surface is a vertical wall, pole, ceiling, or corner rather than a parapet edge. Axis offers a range of wall, pole and corner mount accessories that are better suited to those surfaces and will provide a cleaner, more structurally appropriate fit for non-parapet installations.
FAQs
What is a parapet mount and when would I need one? A parapet mount is a bracket designed to clamp or fix onto the top edge of a parapet wall, which is the low protective wall running along the edge of a flat or low-pitched roof. It is used when there is no suitable vertical wall face, pole or ceiling available and the camera must be positioned above the parapet line to achieve the required field of view.
Is the AXIS TQ6501-E compatible with all Axis PTZ cameras? No. The TQ6501-E is designed for specific Axis PTZ models. Before purchasing, confirm your camera model is listed as compatible in the Axis product documentation or the TQ6501-E datasheet. Using this mount with an unsupported PTZ model may result in fitment issues or inadequate load support.
Can this mount be used indoors? While the TQ6501-E is built for outdoor use, there is no technical reason it cannot be used on an indoor parapet or ledge if the geometry suits the installation. Its primary design intent is exterior mounting, and its weather-resilient construction simply means it will also perform well in exposed indoor environments such as atriums or covered loading areas.
Does the TQ6501-E include all the hardware needed for installation? As a manufacturer-supplied Axis accessory with part number 02110-001, it is intended to include the hardware required for its specific mounting application. For full installation details including fastener requirements and compatible camera attachment hardware, refer to the official Axis TQ6501-E datasheet available through Security Wholesalers.
How does parapet mounting affect the PTZ camera’s performance? Mounting a PTZ camera on a parapet provides elevation that directly improves the range and effectiveness of the camera’s pan, tilt and zoom functions. By raising the camera above the parapet edge, obstructions at ground level are reduced and the camera can sweep wider areas with fewer dead zones. The key requirement is that the mount maintains firm, vibration-free support so that PTZ positioning accuracy is not compromised during operation.
All AXIS Communications IP cameras and recording devices (NVRs/DVRs) are covered by a
3-year back-to-base manufacturer warranty.
Note: Disk drives are limited to a 3-year warranty.
Our warranty is limited to the replacement of faulty items or parts
and does not include damage caused by incorrect fitting of parts or accessories.
(a) Australian Consumer Law (ACL)
Certain legislation, including the Australian Consumer Law (ACL) in the Competition and Consumer Act 2010 (Cth), and similar consumer protection
laws and regulations may confer you with rights, warranties, guarantees, and remedies
relating to the provision of goods or services to you by us via the Site which cannot
be excluded, restricted, or modified. Our liability is governed solely by the ACL and
these Terms.
(b) Goods
If you are a consumer as defined in the ACL, the following notice applies to you:
“Our goods come with warranties and guarantees that cannot be excluded under the
Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or
a refund for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major
failure.”
(c) Our Warranties
To the extent permitted by law, we exclude all express and implied warranties,
and all material and work is provided to you without warranties of any kind,
either express or implied. We expressly disclaim all warranties including but
not limited to implied warranties of merchantability and fitness for a particular
purpose.
(d) Manufacturer Warranties
Certain products, including particular models of IP security cameras and DVR/NVR
equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is
in addition to but may overlap with any rights and remedies you may have under
applicable law, including any Consumer Guarantees. If you are not considered a
“consumer” within the meaning of the ACL, the manufacturer’s warranty may be your
sole remedy. Many manufacturers’ warranties do not apply in a business or commercial
setting. Please contact the manufacturer if you would like to make a claim under
the manufacturer’s warranty.
(e) Repair, Replacement, or a Refund
If you wish to seek repair, replacement, or a refund for a product, please
contact us and we will explain the requirements to you. This may include you
providing evidence of the faulty product to us.
(f) Refund
You are not entitled to a refund for change of mind. If you are entitled to a
refund, we will only provide it once evidence of the faulty product is received
by us, or once we have received the product at our warehouse and inspected it
to assess whether it is eligible for a refund under these Terms. Any refund we
make will be by the same payment method used to purchase the product.
(g) Installed Products
Subject to this clause, we will not accept for return any product that has been
used, connected, installed, attempted to be connected or installed, or if your
product is custom-made or is a special buy product.
(h) Packaging
You must adequately package any product you are returning for our collection
to ensure that it is not damaged during return delivery to our warehouse. You
are also responsible for arranging the return delivery and the costs involved.
(i) Duty of Care
You have a duty of care for the product while it is in your possession. If
you damage products and then subsequently return them, you may be liable to pay
to repair the product to its original condition. In these circumstances, where
a repair is not economically viable, no refund will be made.
At SecurityWholesalers.com.au, we prioritise fast and reliable delivery across Australia. Whether you’re ordering for home or business, you can expect professional service, tracked shipments, and speedy fulfilment — every time.
✔ FREE Shipping Australia-Wide on Orders Over $100
Enjoy free express shipping on all orders over $100. For orders under $100, a flat rate of $20.00 applies. We proudly offer nationwide delivery using trusted courier partners for your peace of mind.
✔ Same-Day Despatch for Fast Delivery
Place your order before 10am (Sydney time) on any business day and we’ll do our best to despatch it the same day, subject to stock availability. We receive new stock into our warehouse every second day, so we always strive to ship the freshest arrivals directly to you. Most orders are received within 1-3 business days via the Express Post network, covering Australian capital cities and major metro areas. Deliveries to regional locations typically take 2–5 business days.
For urgent orders, please contact our customer care team to expedite the delivery and ensure that we can get your equipment to your project site on time.
✔ Reliable Couriers You Can Trust
We primarily use StarTrack Express for fast, secure shipping. Depending on warehouse availability, we may also use Toll or Couriers Please — whichever gets your order to you fastest.
✔ Order Processing & Tracking
Orders are processed Monday to Friday (excluding public holidays) and shipped within 24 hours. Tracking numbers are emailed to you by 11pm on the day your order ships. You can monitor your delivery through:
✔ Missed a Delivery?
If you’re not home at the time of delivery, your parcel will be left in a secure location if considered safe. If not, a collection card will be left and the parcel will be held at the nearest depot or post office for pickup.
✔ Need Help?
If you haven’t received your order within 4 business days, please contact us with your full name and order number. We’ll follow up promptly. Also, be sure to check your email spam folder for shipping notifications or attempted delivery messages.
Trade Discounts Available
Want even more savings? Register instantly for a Trade Account and, once approved, you’ll gain access to exclusive discounts on a wide range of products. It’s our way of supporting installers, resellers, and industry professionals with better pricing and priority service.
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back
Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
