AXIS TQ5001-E Wall-and-Pole Mount for PTZ Cameras with IK10-Rated Robust Design, IP66 RJ45 Connector, Indoor/Outdoor Use‍‌​‌‌​‌‌​​‌‌​‌​​​​‍

Product SKU: TQ5001-E

Product Overview

Installers deploying Axis PTZ cameras across commercial, transport, industrial, and public-space projects need a mount that can adapt to different surfaces without requiring separate accessories for each scenario. The AXIS TQ5001-E Wall-and-Pole Mount addresses this by providing a reversible bracket design that supports both wall and pole mounting from a single unit. Equipped with a built-in cable featuring an IP66-rated RJ45 connector, it helps protect the network connection from water and dust ingress at the camera. An IDC insulation-displacement contact connector option is also available for installers who prefer an alternative termination method. Rated IK10 for impact resistance and made from outdoor-ready material, the TQ5001-E suits exposed perimeter positions, car park poles, building facades, and transport infrastructure. Optional corner mounting support via the AXIS T91A64 Corner Bracket extends placement possibilities further for sites requiring dual-direction camera coverage.

Key Capabilities

Best For

• Outdoor PTZ Deployments on Walls: The reversible bracket and IP66-rated RJ45 connector make this the appropriate choice for mounting compatible Axis PTZ cameras on building exteriors, commercial facades, and transport facility walls.
• Pole-Mounted Camera Positions: Installers covering car parks, perimeter access roads, campus grounds, or industrial yards can flip the bracket and use AXIS Steel Straps TX30 to mount compatible cameras on suitable poles.
• Sites Requiring Corner Camera Coverage: When paired with the optional AXIS T91A64 Corner Bracket, this mount supports positioning a compatible PTZ camera on an external corner to monitor two directions from a single mount point.
• Exposed and High-Traffic Public Spaces: The IK10-rated construction and outdoor-ready material make this suitable for installations in areas where the mount may be subject to physical contact, weather exposure, or environmental stress over long periods.

Why Choose the AXIS TQ5001-E Wall-and-Pole Mount

The AXIS TQ5001-E distinguishes itself from basic camera mounts by combining wall and pole mounting capability in a single accessory through a reversible bracket design rather than requiring separate units for each surface type. The built-in cable with IP66-rated RJ45 connector addresses a practical gap in outdoor PTZ installations where connection protection at the camera entry point directly affects long-term reliability. The IDC connector option adds further installation flexibility that is not typically available in standard camera mounts. IK10-rated construction supports demanding public and industrial environments where a lighter-duty mount would not be appropriate. The optional corner mounting capability via AXIS T91A64 gives installers an additional coverage option without purchasing a separate mount entirely. Available through Security Wholesalers as part of the Axis accessories range, the TQ5001-E is backed by Axis’ 5-year warranty, supporting confidence for long-term commercial and enterprise PTZ camera installations.

Key Features & Technical Specifications

Ideal Use Cases

Choosing the Right Model

• Choose this model if: You are installing a compatible Axis PTZ camera on a wall or pole in an outdoor or demanding environment and need IK10-rated robustness, an IP66-rated RJ45 connection, and the flexibility to use either wall or pole mounting from a single accessory.
• Choose a different model if: Your Axis PTZ camera requires a pendant mount, ceiling mount, or parapet mount configuration, as those installation types require different mounting accessories designed for those specific surfaces.
• Choose a different model if: You are mounting a non-Axis PTZ camera or a standard fixed-lens camera, as the TQ5001-E is designed specifically for compatible Axis PTZ devices and selected Axis panoramic and radar products.

FAQs

1. Can the AXIS TQ5001-E be used as both a wall mount and a pole mount?
   Yes. Flipping the mounting bracket converts the TQ5001-E between wall and pole mounting configurations. For pole mounting, AXIS Steel Straps TX30 must be used to secure the bracket to the pole. This means one accessory can cover both mounting surfaces across different positions on the same project.
2. What does the IP66-rated RJ45 connector on this mount do?
   The built-in cable includes an Ethernet RJ45 connector rated to IP66, which helps prevent water and dust from entering the camera connection point. This is particularly relevant for outdoor installations exposed to rain, hose-down cleaning, or dusty industrial environments where an unprotected connection would be vulnerable.
3. What is the IDC connector option and when would an installer use it?
   IDC stands for insulation-displacement contact. It is an alternative to the standard RJ45 plug connection and allows the cable to be terminated differently depending on site conditions or installer preference. It is useful when field-fitting an RJ45 plug is impractical, such as in confined conduit runs or where the installer’s workflow suits punch-down style termination.
4. Is this mount suitable for outdoor use in exposed positions?
   Yes. The TQ5001-E is made from impact-resistant outdoor-ready material and carries an IK10 impact rating. It is designed for both indoor and outdoor use, including exposed positions such as building exteriors, car park poles, transport facilities, industrial sites, and public-space infrastructure where long-term durability is required.
5. Does the AXIS TQ5001-E support corner mounting?
   Corner mounting is possible when the TQ5001-E is used with the optional AXIS T91A64 Corner Bracket. This is useful for cameras that need to monitor two building sides or approaches from a single position, such as external building corners, perimeter junctions, or entry points with dual-direction coverage requirements.
6. What accessories are included with the TQ5001-E and what additional items might be needed?
   The TQ5001-E includes an AXIS ACI Conduit Cover A and a Gasket C M20. For pole mounting, AXIS Steel Straps TX30 are required separately. Corner mounting requires the optional AXIS T91A64 Corner Bracket. Conduit adapters and screw kits such as AXIS T91G61/T91L61 are available as optional accessories. Security Wholesalers can assist with confirming which accessories are needed for a specific installation scenario.

Additional Information

• Datasheet-axis-tq5001-e-wall-and-pole-mount

{
“@context”: “https://schema.org”,
“@type”: “FAQPage”,
“mainEntity”: [
{
“@type”: “Question”,
“name”: “Can the AXIS TQ5001-E be used as both a wall mount and a pole mount?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Yes. Flipping the mounting bracket converts the TQ5001-E between wall and pole mounting configurations. For pole mounting, AXIS Steel Straps TX30 must be used to secure the bracket to the pole. This means one accessory can cover both mounting surfaces across different positions on the same project.”
}
},
{
“@type”: “Question”,
“name”: “What does the IP66-rated RJ45 connector on this mount do?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The built-in cable includes an Ethernet RJ45 connector rated to IP66, which helps prevent water and dust from entering the camera connection point. This is particularly relevant for outdoor installations exposed to rain, hose-down cleaning, or dusty industrial environments where an unprotected connection would be vulnerable.”
}
},
{
“@type”: “Question”,
“name”: “What is the IDC connector option and when would an installer use it?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “IDC stands for insulation-displacement contact. It is an alternative to the standard RJ45 plug connection and allows the cable to be terminated differently depending on site conditions or installer preference. It is useful when field-fitting an RJ45 plug is impractical, such as in confined conduit runs or where the installer’s workflow suits punch-down style termination.”
}
},
{
“@type”: “Question”,
“name”: “Is this mount suitable for outdoor use in exposed positions?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Yes. The TQ5001-E is made from impact-resistant outdoor-ready material and carries an IK10 impact rating. It is designed for both indoor and outdoor use, including exposed positions such as building exteriors, car park poles, transport facilities, industrial sites, and public-space infrastructure where long-term durability is required.”
}
},
{
“@type”: “Question”,
“name”: “Does the AXIS TQ5001-E support corner mounting?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Corner mounting is possible when the TQ5001-E is used with the optional AXIS T91A64 Corner Bracket. This is useful for cameras that need to monitor two building sides or approaches from a single position, such as external building corners, perimeter junctions, or entry points with dual-direction coverage requirements.”
}
},
{
“@type”: “Question”,
“name”: “What accessories are included with the TQ5001-E and what additional items might be needed?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The TQ5001-E includes an AXIS ACI Conduit Cover A and a Gasket C M20. For pole mounting, AXIS Steel Straps TX30 are required separately. Corner mounting requires the optional AXIS T91A64 Corner Bracket. Conduit adapters and screw kits such as AXIS T91G61/T91L61 are available as optional accessories. Security Wholesalers can assist with confirming which accessories are needed for a specific installation scenario.”
}
}
]
}