Product SKU: TQ3003-SE
Product Overview
For installers specifying camera hardware in coastal, industrial, or chemically exposed environments, the AXIS TQ3003-SE Wall Mount provides a wall anchor point constructed from electropolished SUS 316L marine-grade stainless steel. Where painted steel or aluminium brackets corrode and lose structural integrity within a few seasons, the TQ3003-SE is engineered to remain serviceable in salt air, chemical wash-down, and prolonged moisture exposure. Featuring an external 1½” NPS thread, it connects to compatible Axis pendant kits including the TQ3106-SE and TQ3107-SE to position fixed dome cameras on wall surfaces. It carries a maximum load of 10 kg, an IK10+ impact resistance rating, and a NEMA 250 Type 4X weatherproof classification. Dual cable routing, via a rear wall hole and a bottom ¾” conduit hole, allows a sealed, professional cable finish suited to demanding site conditions. A 3-year manufacturer warranty is included.
Key Capabilities
Electropolished SUS 316L Marine-Grade Steel
SUS 316L contains molybdenum, giving it chloride corrosion resistance that standard SUS 304 cannot match. The electropolished finish further reduces surface porosity, making this mount appropriate for salt-spray zones, chemical processing areas, and waterfront installations where material degradation is a serious concern.
IK10+ Impact Resistance
Rated IK10+, the highest classification in the IK scale, this mount withstands significant mechanical impact. In loading docks, industrial yards, and high-traffic processing facilities where equipment or vehicles pass close to wall-mounted hardware, this rating provides a meaningful level of structural protection.
NEMA 250 Type 4X Weatherproofing
The NEMA 4X classification confirms protection against windblown dust, rain, splashing water, and corrosion-causing agents. This rating applies to the mount itself, supporting fully exposed outdoor installations on rooftops, perimeter walls, and open waterfront structures without additional sealing requirements at the mount body.
Dual Cable Routing Paths
A rear cable hole allows cabling to pass directly through the wall behind the mount, while a bottom ¾” conduit hole accommodates surface-run conduit. Providing both options on a single mount means installers can match the routing method to existing site infrastructure without drilling additional entry points or modifying the mount body.
1½” NPS Thread for Axis Pendant Kit Compatibility
The external 1½” NPS thread is the standard Axis interface for pendant kit attachment, connecting directly to the AXIS TQ3106-SE and TQ3107-SE without adaptors. This allows camera drop length and positioning angle to be configured at the pendant kit level, keeping the wall mount as a fixed, stable structural base.
Best For
- Marine and Coastal Installations: The SUS 316L steel and NEMA 4X rating address the specific degradation risks at marinas, wharves, offshore facilities, and coastal perimeters where salt-laden air accelerates corrosion of standard mounting hardware.
- Food Processing and Wash-Down Environments: The electropolished stainless steel surface resists chemical sanitisers and high-pressure water used in food production, cold storage, and commercial kitchen facilities, where hygiene and material compatibility are both requirements.
- Industrial Perimeter and Yard Walls: With IK10+ impact resistance and full weatherproof construction, this mount suits warehouse exteriors, loading dock entries, and industrial yard walls where conditions would compromise a standard painted bracket within a few years.
- Axis Fixed Dome Cameras Requiring a Pendant Drop: Where the site geometry calls for a pendant-style camera drop from a wall surface, the TQ3003-SE provides the correctly threaded base point for compatible Axis pendant kits, keeping the installation within the Axis accessory ecosystem.
Why Choose the AXIS TQ3003-SE
The AXIS TQ3003-SE is a purpose-built component rather than a generic camera bracket, and its material specification reflects that. SUS 316L stainless steel with an electropolished finish is a material selection normally associated with marine and pharmaceutical hardware, not camera accessories. That choice matters in practice: a painted steel mount in a salt-spray or wash-down environment may fail within 2 to 3 years, introducing both a replacement cost and a potential camera stability risk. The IK10+ rating adds mechanical durability that generic wall mounts do not offer, and the NEMA 4X classification goes beyond basic splash resistance to address wind-driven rain and corrosive conditions directly. The confirmed 10 kg maximum load, dual cable routing options, and direct compatibility with the Axis pendant kit range make this a complete wall-anchor solution for professional Axis installations in demanding sites. The TQ3003-SE is available at Security Wholesalers and backed by a 3-year manufacturer warranty.
Buyer Decision Tips
Buyer Tip: The TQ3003-SE is a wall mount base only. It requires a separately purchased Axis pendant kit, such as the TQ3106-SE or TQ3107-SE, to connect to your camera. Before ordering, confirm which pendant kit is compatible with your specific Axis fixed dome model and what camera drop length your site geometry requires. If your installation calls for a camera mounted directly flush to a flat wall surface without any pendant drop, a different Axis wall mount accessory will be more appropriate for that configuration.
Key Features & Technical Specifications
| Product Model |
AXIS TQ3003-SE Wall Mount |
| Material |
Marine-grade stainless steel, SUS 316L, electropolished |
| Maximum Load |
10 kg (22 lb) |
| Thread Type |
External 1½” NPS |
| Cable Routing Options |
Back cable hole; bottom ¾” conduit hole |
| Impact Rating |
IK10+ |
| Weather Rating |
NEMA 250 Type 4X |
| Compatible Pendant Kits |
AXIS TQ3106-SE, AXIS TQ3107-SE |
| Suitable Environments |
Marine, coastal, industrial, chemical wash-down, indoor and outdoor |
| Warranty |
3 years |
Ideal Use Cases
Marinas and Port Infrastructure
Salt air and constant humidity at waterside sites corrode painted and aluminium brackets within a short time frame. The SUS 316L stainless steel construction and NEMA 4X weatherproofing allow the TQ3003-SE to remain structurally sound and corrosion-free in continuously exposed marine environments.
Food Production and Processing Facilities
Chemical sanitisers and high-pressure wash-down routines require mounting hardware that will not corrode or contaminate the surrounding area. The electropolished SUS 316L surface of the TQ3003-SE resists chemical attack and is easy to clean to the hygiene standards required in food-grade production environments.
Warehouse and Loading Dock Walls
In areas where forklifts, pallets, and vehicle movements create a realistic risk of impact with wall-mounted hardware, the IK10+ rating provides a confirmed level of mechanical protection that generic camera brackets do not carry, reducing the likelihood of mount failure from incidental contact.
Exposed Exterior Building Perimeters
On building walls subject to wind-driven rain, temperature cycling, and direct weather exposure, the NEMA 4X certification confirms that cable penetration points in the mount remain protected without requiring additional site-applied sealants, supporting a durable and weatherproof finished installation.
Choosing the Right Model
- Choose this model if: Your installation is in a marine, coastal, chemically exposed, or industrial wash-down environment, and you need a wall-mounted base with an external 1½” NPS thread to connect to a compatible Axis pendant kit for fixed dome camera positioning.
- Choose a different model if: Your site is a dry, climate-controlled indoor space where material corrosion is not a concern, as a standard non-stainless Axis wall mount accessory will meet the mechanical requirements without the cost premium associated with marine-grade steel. Also assess whether your camera configuration needs a pendant kit drop at all, or whether a direct flush-wall bracket suits your layout better before specifying the TQ3003-SE.
FAQs
- Does the TQ3003-SE mount a camera directly, or does it require a pendant kit as well?
The TQ3003-SE is a wall mount base only. It provides the wall anchor point with an external 1½” NPS thread, which connects to a compatible Axis pendant kit such as the TQ3106-SE or TQ3107-SE. The pendant kit then interfaces with the camera. You cannot attach an Axis fixed dome camera directly to this mount without the intermediate pendant kit component.
- Why does this mount use SUS 316L rather than standard SUS 304 stainless steel?
SUS 316L contains molybdenum, an alloying element that substantially improves resistance to chloride-induced corrosion. In coastal and marine environments, chlorides from salt air can pit and corrode SUS 304 over time. The TQ3003-SE uses SUS 316L specifically because the environments it is designed for, waterfront sites, wash-down areas, and industrial exteriors, are where that material difference is most consequential to long-term mount integrity.
- What is the maximum load the TQ3003-SE can carry?
The confirmed maximum load is 10 kg (22 lb). This accounts for the combined weight of the pendant kit and camera assembly. Verify the total assembled weight of your specific camera and pendant kit pairing before installation to ensure the load remains within this rated limit.
- Can this mount be used indoors as well as outdoors?
Yes. The TQ3003-SE is confirmed for both indoor and outdoor installation. Its marine-grade construction and NEMA 4X weatherproofing are most relevant in harsh outdoor or wet indoor environments, but the mount can also be used in standard indoor settings where long-term material durability or corrosion resistance is a project requirement, such as in cold storage or chemical processing buildings.
- What are the 2 cable routing options on this mount?
The TQ3003-SE includes a back cable hole for running cabling directly through the wall surface behind the mount, and a bottom ¾” conduit hole for connecting surface-run conduit. Both options are built into the mount body, allowing the installer to choose the routing path that matches the site’s existing cable infrastructure without making modifications to the mount.
- Where can I purchase the AXIS TQ3003-SE in Australia and confirm pendant kit availability?
The AXIS TQ3003-SE Wall Mount is part of the Security Wholesalers range of Axis mounting accessories, stocked alongside compatible pendant kits including the TQ3106-SE and TQ3107-SE. Contact the Security Wholesalers team directly to confirm current stock, clarify which pendant kit suits your specific Axis camera model, and ensure you are ordering all required components for your installation before work begins on site.
Additional Information
