Product SKU: T91F67
Product Overview
For installations where corrosion is not a long-term risk but an immediate and ongoing condition, the AXIS T91F67 Pole Mount is built to hold position. Constructed from electropolished and coated marine-grade SS 316L stainless steel, the T91F67 secures Axis fixed dome cameras to cylindrical poles ranging from 100 to 410 mm in outer diameter, covering the majority of standard infrastructure poles encountered across coastal, marine, and industrial sites. The mount supports a maximum load of 15 kg and is supplied with 2 marine-grade stainless steel straps using a TX30 screw interface, delivering a vibration-resistant and mechanically stable fixing without additional clamping hardware. Rated to IK10+ for impact resistance and certified to NEMA 250 Type 4X for corrosion and water ingress protection, it is suited to wharves, processing facilities, coastal perimeter poles, outdoor fuel depots, and any location where standard painted or lower-grade steel brackets would fail under sustained environmental exposure.
Key Capabilities
Marine-Grade SS 316L Construction
The electropolished and coated SS 316L finish incorporates molybdenum, giving it substantially better resistance to chloride-induced pitting and crevice corrosion than standard SS 304 alloys. This is the same material grade used in offshore marine engineering, food-grade processing equipment, and pharmaceutical hardware, chosen specifically because it maintains surface integrity where other alloys fail.
Wide Pole Diameter Range
Compatible with poles from 100 to 410 mm in outer diameter, the T91F67 fits street lighting columns, industrial support poles, and signage posts without custom fabrication or secondary adapters. This range covers the large majority of infrastructure pole types found across commercial, port, and industrial environments.
NEMA 250 Type 4X Certification
NEMA 4X certification confirms protection against corrosion, windblown dust, rain, splashing water, and hose-directed water. For pole-mounted hardware in food processing sites, washdown environments, and exposed outdoor coastal positions, this is the relevant specification standard when selecting mounting accessories for long-term deployment.
IK10+ Impact Resistance
Rated beyond the standard IK10 benchmark, the T91F67 is built to hold its position under significant physical impact. In loading yards, industrial facilities, and public-facing outdoor pole locations, this rating provides structural confidence where accidental or deliberate contact with mounting hardware is a realistic on-site possibility.
Best For
- Marine and Coastal Deployments: The SS 316L material combined with NEMA 4X certification makes the T91F67 a practical specification choice for wharves, marinas, ferry terminals, and coastal perimeter poles where saltwater spray and persistent humidity would degrade standard mounting hardware within months.
- Industrial Washdown and Chemical Environments: The electropolished surface resists chemical contamination and surface pitting, making this mount suitable for long-term installations in processing plants, water treatment facilities, and manufacturing sites subject to frequent high-pressure washdown cycles.
- Outdoor Infrastructure Poles in High-Impact Locations: With a 15 kg load capacity and IK10+ impact resistance, the T91F67 secures Axis fixed dome cameras firmly to outdoor poles in loading areas, fuel depots, and industrial yards where both holding strength and impact tolerance are operationally required.
Why Choose the AXIS T91F67
Painted mild steel and lower-grade stainless alloy brackets lose their protective finish and structural integrity when exposed to saltwater, persistent humidity, or industrial chemicals, often within the first year of an outdoor deployment. The AXIS T91F67 addresses this directly with an electropolished and coated SS 316L construction, the same material specification applied in offshore marine and food-grade engineering contexts for its proven resistance to surface degradation under sustained chemical and moisture exposure. Its combined NEMA 250 Type 4X and IK10+ certifications satisfy both environmental sealing and physical impact requirements without the need for secondary protective enclosures or bracket reinforcement. The included marine-grade stainless steel straps and TX30 interface support poles from 100 to 410 mm in outer diameter with a 15 kg load capacity, providing a stable and vibration-resistant fixing point for Axis fixed dome cameras across a multi-year service life. The T91F67 is available at Security Wholesalers as part of the broader AXIS mounting accessories range.
Buyer Decision Tips
Measure the Pole Outer Diameter Before Ordering: The T91F67 supports cylindrical poles with an outer diameter between 100 mm and 410 mm. The 2 included marine-grade stainless steel straps are sized for this range only, and no adapter is referenced in the product specification for poles outside these limits. Measure the pole at the intended camera mounting height before purchasing, particularly if the pole tapers or if the target position is near either end of the compatible diameter range.
Key Features & Technical Specifications
| Product Name |
AXIS T91F67 Pole Mount |
| SKU |
T91F67 |
| Primary Material |
Marine-grade stainless steel SS 316L, electropolished and coated |
| Maximum Load Capacity |
15 kg (33 lb) |
| Compatible Pole Diameter |
100 to 410 mm (4 to 16 inches) |
| Impact Rating |
IK10+ |
| Environmental Rating |
NEMA 250 Type 4X |
| Included Hardware |
2 x marine-grade stainless steel straps with TX30 screw interface |
| Compatible Camera Type |
Axis fixed dome cameras |
| Installation Environment |
Indoor and outdoor |
| Warranty |
3 years |
| Brand |
AXIS Communications |
Ideal Use Cases
Marine and Port Infrastructure
Wharves, ferry terminals, and port facilities subject mounting hardware to constant saltwater spray and high ambient humidity. The SS 316L construction and NEMA 4X certification allow the T91F67 to maintain structural integrity at pole-mounted camera positions along waterfront infrastructure through extended service periods.
Industrial Processing and Washdown Facilities
Chemical plants, food processing facilities, and manufacturing yards expose mounting hardware to corrosive agents and regular high-pressure washdowns. The electropolished SS 316L finish resists chemical attack and surface pitting while remaining straightforward to clean, without compromising the mount’s structural performance over time.
Coastal Perimeter Surveillance Poles
Outdoor poles along coastal fence lines, seawall access points, and beachfront perimeters require hardware rated for UV exposure, salt-laden air, and driving rain. The T91F67 is built to perform in these conditions through its combined IK10+ and NEMA 4X certifications, with a pole diameter range that accommodates most existing infrastructure pole types without modification.
Outdoor Industrial Yards and Fuel Depots
Loading docks, fuel storage areas, and outdoor industrial yards commonly have existing infrastructure poles within the 100 to 410 mm diameter range the T91F67 supports. Its 15 kg load capacity accommodates Axis fixed dome cameras without supplementary reinforcement, and the IK10+ rating provides structural confidence in active working environments with vehicle and foot traffic.
Choosing the Right Model
- Choose this model if: You are mounting an Axis fixed dome camera to a cylindrical pole with an outer diameter between 100 mm and 410 mm in a marine, coastal, chemical, or persistently wet environment where SS 316L construction, NEMA 250 Type 4X certification, and IK10+ impact resistance are required for a long-term, low-maintenance installation.
- Choose a different model if: Your installation requires wall mounting, ceiling mounting, or a pendant surface configuration rather than pole clamping. If the target pole falls outside the 100 to 410 mm outer diameter range, the supplied straps will not be compatible. For sheltered indoor environments without corrosion exposure, a standard-grade bracket is a more cost-appropriate specification choice.
FAQs
- What pole diameters does the AXIS T91F67 support?
The T91F67 is compatible with cylindrical poles between 100 mm and 410 mm in outer diameter (4 to 16 inches). This covers a broad range of standard infrastructure poles including street lighting columns, signage posts, and industrial support poles. Measure the outer diameter at the exact point where the camera will be positioned before ordering, as the included straps are sized for this range only and cannot be extended beyond it.
- Why is SS 316L specified instead of standard stainless steel?
SS 316L includes molybdenum, which provides significantly better resistance to chloride-induced pitting and crevice corrosion compared to the more common SS 304 grade. In coastal or marine environments, SS 304 hardware can show visible surface degradation within months of exposure to salt air. The 316L specification is the same grade used in offshore marine engineering, pharmaceutical processing equipment, and food-grade installations because of this durability advantage under sustained chemical and moisture exposure.
- What does NEMA 250 Type 4X mean for a mounting bracket?
NEMA 250 Type 4X certification confirms protection against corrosion, windblown dust, rain, splashing water, and hose-directed water. For a pole mount, this means the hardware is engineered to maintain its protective and structural properties when installed in exposed outdoor positions with persistent moisture and direct water contact. It is the relevant reference standard for mounting hardware specified in food processing, marine, and industrial washdown applications.
- Does the T91F67 include all hardware needed for pole installation?
Yes. The T91F67 is supplied with 2 marine-grade stainless steel straps and a TX30 screw interface for securing the mount to the pole. No additional pole-clamping components are required for poles within the 100 to 410 mm diameter range. You will need a TX30 Torx driver to tighten the straps during installation. Camera-to-mount fixing hardware appropriate for your specific Axis fixed dome model should be confirmed separately prior to installation. The T91F67 is part of the Security Wholesalers AXIS mounting accessories range.
- Which Axis cameras is the T91F67 designed to support?
The T91F67 is designed for use with Axis fixed dome cameras and is part of the AXIS T91 mounting accessory series, engineered to align with Axis camera housings and mounting interfaces. If you are specifying this mount for a particular Axis fixed dome model, confirm mechanical compatibility against that camera’s mounting specification before finalising the installation plan to ensure a correct fit.
Additional Information
No additional downloads available for this product.
