Product SKU: T91E61
Product Overview
Built for installers working with Axis dome pendant kits, the AXIS T91E61 Wall Mount provides a 1.5″ NPS threaded bracket for wall-mounted pendant camera installations on interior and exterior surfaces. Constructed from powder-coated aluminium, it delivers a clean and durable mounting point suited to commercial buildings, entrances, corridors, warehouses, schools, and outdoor surveillance positions. Featuring two cable routing options, cables can be run through the rear of the mount for concealed installations or externally through cut-outs at the base to suit conduit runs and retrofit projects. It is also compatible with selected Axis accessories including pole mounts, corner brackets, camera holders, and conduit back boxes, giving installers a flexible mounting platform within the Axis accessory ecosystem. Confirm the pendant kit, camera model, and any additional accessories required before ordering.
Key Capabilities
1.5″ NPS Threaded Interface
The standard 1.5″ NPS thread allows compatible Axis dome pendant kits to attach securely to the wall mount. This gives installers a consistent, stable connection point across supported Axis dome camera setups and related mounting accessories.
Dual Cable Routing Options
Cables can be routed through the back of the mount for concealed wall installations, or externally through cut-outs at the base for surface conduit and retrofit scenarios. This flexibility suits both new builds and upgrades where wall access may be restricted.
Powder-Coated Aluminium Construction
The aluminium body with powder-coated finish provides a durable and professional mounting surface for indoor and outdoor use. It suits building exteriors, commercial entrances, warehouses, schools, and other sites requiring a long-term wall mount solution.
Broad Axis Accessory Compatibility
The T91E61 works alongside selected Axis pole mounts, corner brackets, camera holders, and conduit back boxes. This allows installers to adapt the same wall mount to different site structures and camera positioning requirements across a range of Axis surveillance projects.
Best For
- Pendant Dome Camera Installations: Provides the 1.5″ NPS threaded wall attachment point required for compatible Axis dome pendant kit setups on building walls, entrances, and corridors.
- Retrofit and Upgrade Projects: Dual cable entry options, through the rear or via base cut-outs, allow the mount to adapt to existing cable routes and walls without concealed access.
- Indoor and Outdoor Commercial Sites: Powder-coated aluminium construction suits building exteriors, warehouses, car parks, schools, and internal surveillance areas where a durable wall bracket is needed.
Why Choose the AXIS T91E61 Wall Mount
The AXIS T91E61 is a purpose-built wall mount designed specifically for Axis dome pendant kits using the 1.5″ NPS threaded standard, making it a more dependable option than improvised or generic brackets that may not align with Axis mounting tolerances. Its powder-coated aluminium body suits indoor and outdoor installation environments without requiring additional weatherproofing accessories. The dual cable routing paths, through the rear for concealed cabling or through the base cut-outs for conduit and surface runs, reduce the need for custom modifications on site. Compatibility with selected Axis pole mounts, corner brackets, and conduit back boxes means the same mount can be adapted to poles, building corners, and other non-standard positions. Available through Security Wholesalers, the T91E61 supports a clean and serviceable installation that aligns with the broader Axis mounting ecosystem for professional surveillance deployments.
Key Features & Technical Specifications
| Model |
AXIS T91E61 Wall Mount |
| Product Type |
Wall Mount Accessory |
| Thread Type |
1.5″ NPS |
| Material |
Powder-coated aluminium |
| Installation Location |
Indoor and outdoor |
| Cable Routing |
Through the rear or externally via cut-outs at the base |
| Primary Compatibility |
Selected Axis dome pendant kits with 1.5″ NPS interface |
| Recommended Camera Holder |
AXIS T91A05 Camera Holder 1.5″ NPS |
| Recommended Pole Mount |
AXIS T91B47 Pole Mount |
| Recommended Corner Bracket |
AXIS T94R01B Corner Bracket |
| Recommended Conduit Accessory |
AXIS TQ1601-E Conduit Back Box |
| Compatible Accessories |
Selected Axis pole mounts, corner brackets, camera holders, and conduit accessories |
| Warranty |
3 years |
Buyer Decision Tips
Buyer Tip: Before ordering the T91E61, confirm the specific Axis dome pendant kit you are using and verify that it accepts a 1.5″ NPS wall mount. Some Axis camera models require a dedicated pendant kit or camera holder as an intermediate component between the camera and the wall mount. Also decide whether cables will be routed through the rear of the mount or through the base cut-outs, as this affects how much wall preparation is needed before installation.
Ideal Use Cases
Commercial Building Entrances
The powder-coated aluminium construction and indoor/outdoor suitability make this mount a practical choice for entrance walls, lobby overhangs, and building facades where a compatible Axis dome pendant camera needs a secure, professional wall position.
Warehouse and Industrial Walls
The external cable routing option through the base cut-outs suits warehouse and industrial environments where surface conduit is common. The aluminium body handles the demands of commercial and industrial wall mounting without requiring additional protective housing.
Retrofit and Upgrade Installations
Dual cable routing paths make this mount adaptable to existing walls where cable runs are already in place. This reduces the need to re-route cables or modify the wall, making the T91E61 a practical option for camera upgrades on established Axis surveillance systems.
Schools and Education Facilities
Corridors, external walkways, and campus perimeters benefit from a neat wall-mounted camera position. The T91E61 provides the structured, compatible bracket needed to deploy Axis dome pendant cameras cleanly across education facility walls and covered outdoor areas.
Choosing the Right Model
- Choose this model if: Your installation uses a compatible Axis dome pendant kit with a 1.5″ NPS threaded interface and requires a wall-mounted bracket for indoor or outdoor positioning.
- Choose a different model if: Your camera setup requires a ceiling-mounted pendant drop, a surface box mount, or a direct surface mount without a pendant arm, as a different Axis mounting accessory designed for those configurations will be required.
- Choose this model if: The installation site uses surface conduit or has limited access to the wall cavity, since the base cut-outs provide an external cable routing path without needing to core through the wall.
FAQs
- What is the AXIS T91E61 Wall Mount used for?
The AXIS T91E61 provides a 1.5″ NPS threaded wall bracket for compatible Axis dome pendant kits. It is used when a dome camera needs to be positioned on a wall in a pendant configuration rather than mounted directly to a ceiling or flat surface. It suits both indoor locations such as corridors and lobbies, and outdoor areas including building exteriors and car park walls.
- Will this mount work with any Axis dome camera?
Compatibility depends on the specific pendant kit being used. The T91E61 accepts a 1.5″ NPS threaded pendant kit, and the camera attaches via that kit or a compatible camera holder such as the AXIS T91A05. Always check the pendant kit and camera model combination before purchasing to confirm the full accessory stack required for the installation.
- Can the AXIS T91E61 be installed outdoors?
Yes. The powder-coated aluminium construction is suitable for both indoor and outdoor installations. It can be used on building exteriors, covered walkways, warehouse walls, school campuses, and car park structures. No separate weatherproof enclosure is required for the mount itself, though the camera and pendant kit should also be rated for outdoor use at the intended installation point.
- What cable routing options does the T91E61 support?
Cables can be routed through the back of the mount for a concealed installation where the cable enters from behind the wall, or externally through cut-outs at the base of the mount for surface conduit runs or retrofit projects. Choosing the routing method early allows the installer to prepare the wall accordingly before fixing the mount in place.
- What does 1.5″ NPS mean and why does it matter?
NPS stands for National Pipe Straight, a standardised thread specification used across the Axis mounting accessory range. The 1.5″ NPS dimension must match the pendant kit being used. If the pendant kit uses a different thread standard or size, the T91E61 will not provide a secure fit. Confirm the thread specification of your pendant kit before selecting this wall mount.
- Can the T91E61 be used with pole or corner mounting accessories?
Yes. The T91E61 is compatible with selected Axis accessories including the AXIS T91B47 Pole Mount and the AXIS T94R01B Corner Bracket. These accessories allow the same wall mount to be adapted for poles, external building corners, and other positions where direct wall mounting is not practical. Security Wholesalers can assist with confirming the correct accessory combination for your specific installation layout.
Additional Information
