AXIS T6112 Mk II Audio and I/O Interface | Microphone & I/O Expansion for Axis Cameras
$336.60
FREE DELIVERYWARRANTY GUARANTEED
✔ Dedicated 5★ Customer Care Team ✔ Fast & Responsive Tech Support
AXIS T6112 Mk II | Audio and I/O Interface | Built-In Microphone | Portcast Technology
The AXIS T6112 Mk II delivers a compact audio and I/O expansion interface designed for compatible Axis cameras. Featuring Axis portcast technology, it transfers audio and I/O data digitally over the existing network cable, eliminating the need for separate cabling runs. It also integrates a built-in microphone and digital input/output connectivity, allowing a single audio/video stream without requiring an additional IP address or VMS licence. This makes it suitable for retrofitting audio capability into existing Axis camera installations with minimal disruption.
Key Features
Built-In Microphone: Adds onboard audio capture to compatible Axis cameras without external mic hardware.
Portcast Technology: Transfers audio and I/O data digitally over the network cable for a clean, integrated setup.
Single Audio/Video Stream: Combines audio and video into one stream, simplifying recording and management.
No Extra IP Address Required: Operates through the host camera’s IP address, reducing network overhead.
No Extra VMS Licence Required: Integrates with existing VMS setups without triggering additional licensing costs.
Plug-and-Play Installation: Designed for straightforward connection to compatible Axis cameras with minimal configuration.
For Axis installations that require audio capture and sensor integration without adding complexity to the network, the AXIS T6112 Mk II Audio and I/O Interface provides a practical expansion path. This compact interface adds a built-in microphone and digital input/output connectivity to compatible Axis network cameras using Axis portcast technology, which transfers audio and I/O data digitally over the existing network cable between the camera and the interface. The result is a single combined audio and video stream that simplifies recording, live monitoring, and integration with video management software. Because the T6112 Mk II operates through the connected camera rather than as an independent network device, no additional IP address is required and no additional VMS licence is needed according to Axis. An external speaker can also be connected to allow audio clips to be played through the system. Compatibility with the specific Axis camera model must be confirmed before ordering.
Key Capabilities
Built-In Microphone
The T6112 Mk II adds a built-in microphone to compatible Axis cameras, enabling audio recording and audio analytics where the camera itself lacks this capability. This gives operators sound context alongside video, supporting better incident understanding and event verification.
Axis Portcast Technology
Portcast transfers audio and I/O data digitally over the same network cable used for video. This eliminates the need for separate audio cabling runs and keeps the installation tidy, which is especially valuable when retrofitting audio capability into an existing Axis camera deployment.
Digital Input and Output
The digital I/O ports allow connection to external sensors, detectors, buttons, or alarm devices. These can trigger event-based recording, initiate automated actions, or integrate the camera into a broader site security response, without needing a separate controller device.
No Extra IP Address or VMS Licence
The interface integrates through the host Axis camera rather than registering as a separate network endpoint. According to Axis, this means no additional IP address allocation and no additional VMS licence is required, keeping network and licensing overhead to a minimum.
External Speaker Output
An external speaker can be connected to the T6112 Mk II to allow audio clips to be played back through the surveillance system. This supports deterrence applications, operator-initiated announcements, or automated event-triggered messaging at the camera location.
Best For
Retrofitting Audio to Existing Axis Cameras: Adds a built-in microphone to compatible Axis cameras that lack native audio, using the existing network cable via portcast technology with no extra cabling.
Alarm and Sensor Integration: The digital I/O ports allow connection to motion detectors, door contacts, panic buttons, or alarm panels to trigger event-based recording or automated responses.
Audio Analytics Applications: Supports audio analytics when used with compatible Axis cameras and software, enabling detection of sound events such as aggression, glass breaking, or raised noise levels.
Commercial and Institutional Installations: Suited to retail, education, healthcare, logistics, and building security environments where audio context is needed alongside video without increasing the network device count.
Why Choose the AXIS T6112 Mk II
The AXIS T6112 Mk II addresses a specific gap in Axis camera deployments: adding microphone and I/O capability to cameras that do not include these natively, without introducing a new network endpoint. A basic standalone audio input device would require its own IP address, its own VMS channel licence, and separate audio cabling – adding cost and complexity at both installation and management stages. The T6112 Mk II avoids all of this by using Axis portcast technology to carry audio and I/O over the existing network cable to the camera, keeping everything within a single stream and a single device registration. The addition of digital I/O further extends the camera into a trigger point for broader alarm and event workflows. For Axis integrators and system designers looking to add audio and I/O to existing or new Axis camera positions, the T6112 Mk II is available through Security Wholesalers as part of the Axis accessories range.
Buyer Decision Tips
Compatibility Check Before Ordering: The AXIS T6112 Mk II is designed for use with selected compatible Axis cameras only. Not all Axis camera models support portcast technology or this interface. Before purchasing, confirm that your specific Axis camera model is listed as compatible with the T6112 Mk II on the Axis product compatibility page. This is particularly important when adding it to an existing deployment where the camera model is already fixed.
External Speaker is Not Included: The T6112 Mk II supports connection to an external speaker for audio clip playback, but the speaker itself is a separate item and is not supplied with this interface. If audio output is required for your application, plan for a compatible external speaker as part of your bill of materials.
Key Features & Technical Specifications
Model
AXIS T6112 Mk II Audio and I/O Interface
Part Number
02554-001
Product Type
Audio and I/O Interface
Brand
Axis Communications
Built-In Microphone
Yes
Audio Technology
Axis portcast technology
Audio and Video Stream
Single combined stream
Digital Input/Output
Yes
External Speaker Support
Yes, via external speaker connection
Connection Method
Single Ethernet cable (network cable)
Additional IP Address Required
No
Additional VMS Licence Required
No (as stated by Axis)
Installation
Plug-and-play
Compatibility
Selected compatible Axis network cameras only
Warranty
Axis 5-year warranty
Ideal Use Cases
Retail Environments
Retail sites benefit from audio context during incidents such as disputes or theft. The built-in microphone on the T6112 Mk II adds sound capture to compatible Axis cameras at checkout areas or customer service counters, supporting audio analytics and event review.
Education Facilities
Schools and campuses can use the T6112 Mk II to add audio recording and digital I/O integration to existing Axis camera positions, enabling event-triggered recording when connected to door contacts, panic buttons, or access control devices.
Healthcare Sites
In healthcare environments where audio monitoring supports staff safety, the built-in microphone enables audio capture without adding a separate network device. The single combined stream also simplifies VMS management across multi-camera deployments.
Logistics and Warehouse
Loading docks and warehouse access points often require both audio monitoring and sensor-triggered recording. The digital I/O ports on the T6112 Mk II allow connection to door sensors or alarm devices, triggering recording or actions when movement or access events occur.
Building Security and Commercial Premises
For commercial buildings where an Axis camera system is already in place, the T6112 Mk II enables audio and I/O expansion at specific camera positions without rerunning cables or adding new IP devices to the network, keeping the system clean and manageable.
Choosing the Right Model
Choose this model if: You are working with a compatible Axis camera that lacks a built-in microphone or I/O ports and you need to add audio recording, audio analytics, or sensor/alarm integration without adding a new IP address or VMS licence to the system.
Choose a different model if: Your Axis camera already includes a built-in microphone and sufficient I/O ports for your application, in which case this interface would duplicate existing functionality. Also consider that if your camera model is not confirmed as compatible with the T6112 Mk II, a different audio or I/O solution will be required.
FAQs
Does the AXIS T6112 Mk II work with all Axis cameras? No. The T6112 Mk II is designed for use with selected compatible Axis network cameras only. Portcast technology must be supported by the specific camera model. Before ordering, check the Axis product compatibility documentation to confirm your camera is listed as compatible. This step is especially important when integrating the interface into an existing Axis system.
How does Axis portcast technology work? Portcast transfers audio and I/O data digitally over the same Ethernet cable that carries the camera’s video feed. This means no separate audio cabling is needed between the interface and the camera. The audio and video are then managed as a single combined stream, simplifying recording and VMS integration at the camera position.
Does installing this interface require an additional IP address on the network? No. According to Axis, the T6112 Mk II operates through the connected camera rather than as an independent network device. It does not require its own IP address, which keeps network management straightforward, particularly on sites with a large number of camera positions already assigned.
Will I need an extra VMS licence to use the T6112 Mk II? According to Axis, no additional VMS licence is required. The interface integrates through the host camera, so it does not register as a separate device in the video management system. This avoids the licensing cost that would typically apply if a separate audio or I/O device were added to the network.
Can the T6112 Mk II play audio out loud at the camera location? Yes, but only through an external speaker that must be connected separately. The T6112 Mk II includes an output for connecting an external speaker, which can be used to play audio clips for deterrence, announcements, or automated event-triggered responses. The speaker itself is not included with the interface.
What types of external devices can connect to the digital I/O ports? The digital input/output ports support connection to a range of external devices including motion detectors, door contacts, glass break sensors, panic buttons, sirens, and other alarm or automation components. These connected devices can be used to trigger recording, initiate alarm responses, or activate actions within the Axis camera and VMS configuration. The T6112 Mk II is available through Security Wholesalers as part of the Axis accessories range.
Additional Information
No additional downloads available for this product.
All AXIS Communications IP cameras and recording devices (NVRs/DVRs) are covered by a
3-year back-to-base manufacturer warranty.
Note: Disk drives are limited to a 3-year warranty.
Our warranty is limited to the replacement of faulty items or parts
and does not include damage caused by incorrect fitting of parts or accessories.
(a) Australian Consumer Law (ACL)
Certain legislation, including the Australian Consumer Law (ACL) in the Competition and Consumer Act 2010 (Cth), and similar consumer protection
laws and regulations may confer you with rights, warranties, guarantees, and remedies
relating to the provision of goods or services to you by us via the Site which cannot
be excluded, restricted, or modified. Our liability is governed solely by the ACL and
these Terms.
(b) Goods
If you are a consumer as defined in the ACL, the following notice applies to you:
“Our goods come with warranties and guarantees that cannot be excluded under the
Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or
a refund for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major
failure.”
(c) Our Warranties
To the extent permitted by law, we exclude all express and implied warranties,
and all material and work is provided to you without warranties of any kind,
either express or implied. We expressly disclaim all warranties including but
not limited to implied warranties of merchantability and fitness for a particular
purpose.
(d) Manufacturer Warranties
Certain products, including particular models of IP security cameras and DVR/NVR
equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is
in addition to but may overlap with any rights and remedies you may have under
applicable law, including any Consumer Guarantees. If you are not considered a
“consumer” within the meaning of the ACL, the manufacturer’s warranty may be your
sole remedy. Many manufacturers’ warranties do not apply in a business or commercial
setting. Please contact the manufacturer if you would like to make a claim under
the manufacturer’s warranty.
(e) Repair, Replacement, or a Refund
If you wish to seek repair, replacement, or a refund for a product, please
contact us and we will explain the requirements to you. This may include you
providing evidence of the faulty product to us.
(f) Refund
You are not entitled to a refund for change of mind. If you are entitled to a
refund, we will only provide it once evidence of the faulty product is received
by us, or once we have received the product at our warehouse and inspected it
to assess whether it is eligible for a refund under these Terms. Any refund we
make will be by the same payment method used to purchase the product.
(g) Installed Products
Subject to this clause, we will not accept for return any product that has been
used, connected, installed, attempted to be connected or installed, or if your
product is custom-made or is a special buy product.
(h) Packaging
You must adequately package any product you are returning for our collection
to ensure that it is not damaged during return delivery to our warehouse. You
are also responsible for arranging the return delivery and the costs involved.
(i) Duty of Care
You have a duty of care for the product while it is in your possession. If
you damage products and then subsequently return them, you may be liable to pay
to repair the product to its original condition. In these circumstances, where
a repair is not economically viable, no refund will be made.
At SecurityWholesalers.com.au, we prioritise fast and reliable delivery across Australia. Whether you’re ordering for home or business, you can expect professional service, tracked shipments, and speedy fulfilment — every time.
✔ FREE Shipping Australia-Wide on Orders Over $100
Enjoy free express shipping on all orders over $100. For orders under $100, a flat rate of $20.00 applies. We proudly offer nationwide delivery using trusted courier partners for your peace of mind.
✔ Same-Day Despatch for Fast Delivery
Place your order before 10am (Sydney time) on any business day and we’ll do our best to despatch it the same day, subject to stock availability. We receive new stock into our warehouse every second day, so we always strive to ship the freshest arrivals directly to you. Most orders are received within 1-3 business days via the Express Post network, covering Australian capital cities and major metro areas. Deliveries to regional locations typically take 2–5 business days.
For urgent orders, please contact our customer care team to expedite the delivery and ensure that we can get your equipment to your project site on time.
✔ Reliable Couriers You Can Trust
We primarily use StarTrack Express for fast, secure shipping. Depending on warehouse availability, we may also use Toll or Couriers Please — whichever gets your order to you fastest.
✔ Order Processing & Tracking
Orders are processed Monday to Friday (excluding public holidays) and shipped within 24 hours. Tracking numbers are emailed to you by 11pm on the day your order ships. You can monitor your delivery through:
✔ Missed a Delivery?
If you’re not home at the time of delivery, your parcel will be left in a secure location if considered safe. If not, a collection card will be left and the parcel will be held at the nearest depot or post office for pickup.
✔ Need Help?
If you haven’t received your order within 4 business days, please contact us with your full name and order number. We’ll follow up promptly. Also, be sure to check your email spam folder for shipping notifications or attempted delivery messages.
Trade Discounts Available
Want even more savings? Register instantly for a Trade Account and, once approved, you’ll gain access to exclusive discounts on a wide range of products. It’s our way of supporting installers, resellers, and industry professionals with better pricing and priority service.
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back
Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)
AXIS T6112 Mk II Audio and I/O Interface | Microphone & I/O Expansion for Axis Cameras
