Product SKU: P3268-SLVE
Product Overview
Certified for environments that would destroy standard surveillance hardware, the AXIS P3268-SLVE is a fixed dome camera built around an electropolished SS 316L marine-grade stainless steel enclosure that resists seawater corrosion, salt air, and the aggressive cleaning chemicals used in maritime and food processing operations. Featuring 8MP 4K resolution at up to 30 fps, Lightfinder 2.0, and Forensic WDR, it captures forensic-level detail across high-contrast and low-light scenes, while built-in OptimizedIR delivers clear coverage up to 40 metres in complete darkness. Equipped with a 3-8mm varifocal lens providing up to 100 degrees field of view, it offers practical framing flexibility at the time of installation. The ARTPEC-8 processor with a dedicated deep learning processing unit (DLPU) enables on-edge analytics and supports ACAP version 4 applications. Rated IK11, IP66/67/68, and NEMA 4X, and certified to both DNV maritime standards and NSF/ANSI Standard 169, this camera is purpose-built for marine vessels, offshore platforms, ports, food processing facilities, and cold chain environments. Please note this product carries an approximate 2-3 week lead time.
Key Capabilities
Electropolished SS 316L Marine-Grade Stainless Steel Housing
The SS 316L stainless steel enclosure is electropolished to resist prolonged exposure to seawater, salt air, and the industrial cleaning agents used in maritime and food processing environments. This is a structural material choice, not a surface coating applied to a plastic or aluminium housing, and it directly enables both DNV and NSF certification.
DNV and NSF/ANSI Standard 169 Dual Certification
DNV certification confirms compliance with maritime classification society requirements for vibration, humidity, temperature cycling, and corrosion resistance. NSF/ANSI Standard 169 qualifies the camera for food contact zones where surface cleanability and chemical resistance are subject to independent audit. Holding both certifications in a single dome unit is unusual in this product category.
IK11, NEMA 4X, and Triple IP Rating
IK11 exceeds the standard IK10 impact threshold, providing the highest rated impact protection available in a dome camera format. Combined with NEMA 4X for corrosive environments and IP66/67/68 for simultaneous protection against high-pressure washdowns, temporary immersion, and continuous submersion, this camera covers the full range of physical exposure scenarios present in marine and industrial sites.
8MP 4K with Lightfinder 2.0 and Forensic WDR
At 8MP and up to 30 fps, the P3268-SLVE captures detail at a level suited to forensic review. Lightfinder 2.0 maintains true colour in near-dark conditions, while Forensic WDR preserves readable detail in scenes where strong light sources and deep shadow areas exist within the same frame, which is common in port loading areas and vessel deck environments.
OptimizedIR Up to 40 Metres
Built-in OptimizedIR automatically adjusts illumination intensity as the varifocal lens is set to different focal lengths, preventing overexposure at short distances and maintaining range at longer focal settings. This delivers usable footage in complete darkness out to 40 metres without requiring external IR floodlights at the camera mounting point.
ARTPEC-8 with DLPU and Axis Edge Vault
The ARTPEC-8 SoC includes a dedicated deep learning processing unit that handles on-edge analytics independently of server infrastructure, which is relevant in offshore and remote industrial locations. Axis Edge Vault adds a hardware-based cybersecurity layer that stores cryptographic keys securely and verifies firmware integrity, reducing exposure to unauthorised configuration changes in isolated network environments.
Best For
- Maritime Vessels and Offshore Platforms: DNV certification and SS 316L construction directly satisfy classification society requirements for cameras installed on vessel decks, in engine rooms, and on offshore structures where salt corrosion is a continuous operational condition.
- Food Processing and Washdown Zones: NSF/ANSI Standard 169 certification qualifies the P3268-SLVE for installation in food production and packaging areas where regular chemical washdowns are mandatory and surveillance equipment must pass food safety audits.
- Cold Chain and Blast Freezer Environments: The confirmed operating range of -40 degrees C to 50 degrees C allows this camera to function unassisted inside blast freezer rooms and cold storage warehouses where most standard IP cameras fail due to condensation damage and extreme cold.
- High-Impact Industrial Manufacturing: The IK11 impact rating and stainless steel housing suit production floors and loading areas where forklifts, heavy machinery, and airborne debris pose a real risk of physical contact with mounted camera housings.
Why Choose the AXIS P3268-SLVE
The AXIS P3268-SLVE holds a position that very few fixed dome cameras occupy: it simultaneously satisfies DNV maritime classification requirements and NSF/ANSI Standard 169 food processing compliance within a single housing. A standard outdoor dome camera with an IP67 rating, regardless of its resolution or IR range, cannot be legally or practically installed in DNV-classified marine environments or in facilities subject to food safety certification audits. The P3268-SLVE addresses both requirements without forcing a compromise on image quality. The combination of 8MP 4K, Forensic WDR, Lightfinder 2.0, and OptimizedIR at 40 metres means the camera performs at a high imaging level under the same demanding conditions its housing is rated for. The ARTPEC-8 processor with DLPU adds on-edge analytics suited to remote sites where server-side processing infrastructure is unavailable or unreliable. Available through Security Wholesalers, this is a specialist product with a 2-3 week lead time that should be built into project procurement schedules from the start.
Buyer Decision Tips
Certification Matching: Before specifying the P3268-SLVE, confirm which certification your project actually requires. If your environment needs DNV maritime classification compliance, or NSF/ANSI Standard 169 for food processing, this camera is one of the very few dome units that satisfies both standards in a single product. If your project is a standard outdoor or industrial installation without these specific certification requirements, a conventional IP67/IK10-rated dome camera will meet the brief at a considerably lower cost and with shorter delivery times.
Lead Time Planning: This product typically carries an approximate 2-3 week lead time. For project-based installations on vessels, offshore platforms, or food manufacturing sites, factor this into procurement schedules early. Installation windows on regulated or operational facilities are often fixed, and last-minute orders for this model are unlikely to arrive in time for scheduled commissioning.
Key Features & Technical Specifications
| Model |
AXIS P3268-SLVE |
| Resolution |
8MP (4K) |
| Frame Rate |
Up to 30 fps |
| Lens |
3-8mm varifocal |
| Field of View |
Up to 100 degrees |
| IR Range |
OptimizedIR up to 40m (130ft) |
| Low Light Technology |
Lightfinder 2.0 |
| WDR |
Forensic WDR |
| Housing Material |
Electropolished marine-grade stainless steel SS 316L |
| Impact Rating |
IK11 |
| Ingress Protection |
IP66/IP67/IP68 |
| Environmental Rating |
NEMA 4X |
| Operating Temperature |
-40 degrees C to 50 degrees C (-40 degrees F to 122 degrees F) |
| Certifications |
DNV (maritime), NSF/ANSI Standard 169 (food processing) |
| Processor |
ARTPEC-8 SoC with Deep Learning Processing Unit (DLPU) |
| Analytics |
Deep learning on the edge, ACAP version 4 support |
| Cybersecurity |
Axis Edge Vault hardware-based security platform |
| Lead Time |
Approximately 2-3 weeks |
Ideal Use Cases
Maritime Vessels and Offshore Platforms
DNV certification and SS 316L construction allow the P3268-SLVE to be mounted on vessel decks, in machinery spaces, and on offshore structures where salt spray and humidity are constant. This makes it directly compatible with installations subject to classification society requirements that a standard outdoor dome cannot satisfy.
Food and Beverage Processing Facilities
NSF/ANSI Standard 169 certification permits installation in food production, processing, and packaging zones subject to mandatory washdown regimes. The electropolished SS 316L surface resists bacterial adhesion and tolerates the cleaning chemicals that would degrade a standard camera housing over time.
Blast Freezer and Cold Chain Storage
The confirmed operating range of -40 degrees C makes the P3268-SLVE directly compatible with blast freezer rooms and cold storage warehouses. Standard surveillance cameras typically carry a lower limit of -10 degrees C or -30 degrees C, meaning they require heated enclosures or fail entirely in these conditions.
Ports, Wharves, and Marine Infrastructure
Coastal port environments combine salt spray, UV exposure, and high humidity with the operational need for forensic imaging of people and vehicles at access points and loading docks. The 8MP resolution and OptimizedIR at 40 metres support this level of coverage in conditions that degrade standard camera housings rapidly.
Heavy Industrial Manufacturing
IK11 impact resistance exceeds the standard IK10 threshold used in conventional vandal dome cameras. In manufacturing environments where forklifts, heavy equipment, and airborne debris are present, the stainless steel IK11-rated dome provides a level of structural durability that polycarbonate-housed cameras cannot match.
Choosing the Right Model
- Choose this model if: Your project requires DNV maritime certification, NSF/ANSI Standard 169 food processing compliance, or both. The electropolished SS 316L enclosure, IK11 impact rating, triple IP rating (IP66/67/68), NEMA 4X classification, and -40 to 50 degrees C operating range are confirmed specifications that directly address these specialist environments.
- Choose a different model if: Your installation is a standard outdoor or commercial environment without specific maritime or food processing certification requirements. A conventional IP67/IK10-rated fixed dome camera with comparable resolution will deliver similar imaging performance at a substantially lower cost and with shorter lead times.
- Factor in lead time before committing: This is a specialist product with an approximate 2-3 week delivery lead time. Confirm procurement timelines with your supplier before finalising the project specification, particularly where installation windows on vessels or regulated facilities are fixed in advance.
FAQs
- What does DNV certification mean for the AXIS P3268-SLVE and when is it mandatory?
DNV (formerly Det Norske Veritas) is an independent maritime classification society. A DNV-certified camera has been assessed against requirements for vibration, humidity, temperature cycling, and corrosion resistance relevant to maritime operations. On commercial vessels and offshore platforms subject to class society oversight, DNV certification on installed equipment is often a mandatory requirement during survey and inspection, not simply a recommendation.
- Why does NSF/ANSI Standard 169 certification matter for food facility camera installations?
NSF/ANSI Standard 169 covers special purpose food equipment and devices used in or near food contact zones. Cameras installed in food processing, packaging, or preparation areas must meet surface material, cleanability, and chemical resistance criteria so they do not pose a contamination risk. The P3268-SLVE’s electropolished SS 316L casing satisfies these requirements, allowing it to be installed in areas that undergo regular food safety audits without requiring an enclosure modification or exception.
- What is the difference between IP66, IP67, and IP68, and why does the P3268-SLVE carry all 3 ratings?
IP66 covers protection against sustained, high-pressure water jets such as hose-down washdowns. IP67 covers temporary immersion up to 1 metre for up to 30 minutes. IP68 covers continuous submersion at manufacturer-specified depths. Most outdoor surveillance cameras carry IP67 only. The P3268-SLVE carries all 3 simultaneously, which is directly relevant in marine deck environments and food processing washdown areas where cameras are exposed to both high-pressure water streams and potential submersion conditions.
- Can the P3268-SLVE operate inside a blast freezer room without a heated enclosure?
Yes. The confirmed operating temperature range of -40 degrees C to 50 degrees C means the P3268-SLVE can function inside blast freezer and cold storage environments without an additional heated housing. Standard IP cameras typically operate to a minimum of -10 degrees C or -30 degrees C. At temperatures below these thresholds, condensation damage and LCD failure become common failure modes. The P3268-SLVE’s confirmed lower limit of -40 degrees C addresses this directly.
- What analytics can the ARTPEC-8 processor run on this camera and does it require a server?
The ARTPEC-8 SoC includes a dedicated deep learning processing unit (DLPU) that handles on-edge analytics independently of any server-side infrastructure. It supports ACAP version 4, which allows operators and integrators to deploy third-party or custom-developed deep learning applications directly on the camera. This is particularly useful in offshore, maritime, and remote industrial locations where a reliable connection to a central analytics server cannot be guaranteed.
- What does IK11 mean in practice and how does it differ from a standard IK10 vandal dome?
IK ratings measure resistance to mechanical impact. IK10 is the standard threshold used in vandal dome cameras and corresponds to 20 joules of impact energy. IK11 is a supplementary rating that exceeds this, corresponding to 50 joules of impact energy. In practice, IK11 provides measurably greater resistance to direct impacts from tools, equipment, and moving objects, which is relevant on production floors, marine decks, and loading areas where contact between machinery and mounted cameras is a realistic risk.
- Where is the AXIS P3268-SLVE available and what should I know about ordering?
The P3268-SLVE is part of the Security Wholesalers range and is available to order. As a specialist product, it carries an approximate lead time of 2-3 weeks. Project managers and installers working on marine, offshore, or food facility fit-outs should place orders well ahead of scheduled commissioning dates, particularly where installation windows on operational vessels or certified facilities are fixed and cannot be moved if equipment arrives late.
Additional Information
