Product Overview
Built for deployment in explosive atmospheres where standard surveillance equipment is prohibited by law, the Axis ExCam XF Q1785 is a 2MP explosion-protected fixed-box network camera certified to ATEX, IECEx, and multiple international hazardous area standards covering Zones 1, 2, 21, and 22. Housed in marine-grade stainless steel 316L with an integrated wiper and sunshield, it is engineered for the sustained operational demands of oil and gas facilities, chemical processing plants, offshore platforms, and mining environments. Featuring a 4.3-137mm varifocal lens with 32x optical zoom, the camera delivers a horizontal field of view ranging from 60 degrees down to 2.3 degrees, allowing operators to frame distant targets precisely from a fixed mounting point. It also incorporates Forensic WDR, Lightfinder technology for usable colour imaging down to 0.16 lux, and a pre-installed 128GB AXIS Surveillance microSDXC card for on-camera storage. With an operating temperature range of -60 degrees C to +60 degrees C, the ExCam XF Q1785 is rated for extreme climates without additional conditioning.
Key Capabilities
ATEX and IECEx Explosion Protection
Certified for use in Zones 1, 2, 21, and 22 for both gas and dust explosive atmospheres, with approvals including ATEX, IECEx, EAC, INMETRO, PESO, and UKCA. This satisfies the legal and site safety requirements for surveillance in hazardous classified areas without additional enclosures.
32x Optical Zoom with Remote Framing
The 4.3-137mm varifocal lens with 32x optical zoom allows operators to remotely adjust coverage from a 60-degree wide view to a 2.3-degree narrow field without physical access to the camera. This is critical in hazardous zones where re-entry must be minimised after commissioning.
Extreme Temperature Tolerance
Operates continuously from -60 degrees C to +60 degrees C, covering both Arctic-condition installations and high-heat industrial plant environments. This eliminates the need for heated or cooled enclosures in locations where ambient temperatures fall outside the range of standard IP cameras.
Forensic WDR and Lightfinder
Forensic WDR manages high-contrast scenes with simultaneous bright and dark areas, while Lightfinder delivers usable colour images down to 0.16 lux minimum illumination. Both are relevant for industrial facilities with mixed lighting, flares, or poorly lit process zones at night.
AXIS Guard Suite Analytics Pre-Installed
Ships with AXIS Motion Guard, AXIS Fence Guard, AXIS Loitering Guard, and AXIS Perimeter Defender pre-installed. These analytics support perimeter intrusion detection and zone monitoring in plant environments where unattended entry must trigger automated alerts without round-the-clock operator attention.
128GB On-Camera Storage with Zipstream
The pre-installed 128GB AXIS Surveillance microSDXC card enables local edge storage for continuous or event-based recording without dependency on a network recorder. AXIS Zipstream technology in H.264 reduces bandwidth and storage consumption while preserving forensic image quality in full 1920×1080 resolution.
Best For
- Oil, Gas, and Petrochemical Facilities: ATEX and IECEx certification for Zones 1 and 2 covers the gas explosive atmosphere classifications present at refineries, LNG terminals, compressor stations, and offshore platforms.
- Dust-Classified Industrial Environments: Zone 21 and 22 certification for combustible dust atmospheres makes the ExCam XF Q1785 suitable for grain handling, flour milling, pharmaceutical powder processing, and similar facilities.
- Remote or Difficult-Access Installations: The 32x remote zoom and electronic image stabilisation allow precise framing adjustments from the control room after physical installation, which reduces the need for technician re-entry into hazardous or high-risk areas.
- Extreme Climate Sites: The -60 degrees C to +60 degrees C operating range covers Arctic oil fields, desert chemical plants, and high-temperature process areas where standard cameras require thermal management accessories.
Why Choose the Axis ExCam XF Q1785
The ExCam XF Q1785 addresses a surveillance requirement that standard network cameras physically cannot meet: legal, continuous operation inside classified explosive atmospheres. While a conventional box or bullet camera may offer comparable resolution at a fraction of the cost, it carries no hazardous area certification and cannot be legally installed in Zone 1, 2, 21, or 22 environments without an approved flameproof enclosure. This camera eliminates that dependency entirely. The 32x optical zoom provides coverage flexibility that is essential when camera repositioning is impractical once a unit is commissioned in a hazardous zone. The pre-installed 128GB storage card and AXIS Guard Suite analytics mean the system can operate autonomously, triggering perimeter alerts and storing footage locally even where network connectivity is intermittent. The stainless steel 316L housing and integrated wiper are suited to corrosive and wet atmospheric conditions. Available at Security Wholesalers, the ExCam XF Q1785 is an engineered solution for classified area surveillance rather than a general-purpose upgrade.
Buyer Decision Tips
Confirm Your Zone Classification Before Purchase: The ExCam XF Q1785 is certified for Zones 1, 2, 21, and 22 covering gas group IIC and dust group IIIC. Before specifying this camera, verify the zone classification and gas or dust group for your site with your hazardous area engineer. Zone 0 or Zone 20 requirements involve different certification standards and this model does not cover those zones.
No Built-In IR Illumination: The ExCam XF Q1785 does not include an infrared illuminator. Night-time or low-light performance depends on existing ambient lighting or separately installed explosion-protected lighting at the site. With adequate scene illumination, Lightfinder delivers usable colour images down to 0.16 lux, but the camera will not function in complete darkness without an external light source.
Key Features & Technical Specifications
| Resolution | 2MP, 1920×1080 maximum |
| Frame Rate | Up to 50/60 fps |
| Image Sensor | 1/2.8″ progressive scan RGB CMOS |
| Lens | 4.3-137mm varifocal, 32x optical zoom, remote zoom |
| Horizontal Field of View | 60 degrees (wide) to 2.3 degrees (telephoto) |
| Minimum Illumination (Colour) | 0.16 lux |
| Minimum Illumination (B/W) | 0.03 lux |
| IR Illumination | None |
| Explosion Protection Certifications | ATEX, IECEx, EAC, IA, INMETRO, PESO, UKCA |
| Hazardous Area Zones | Zones 1, 2, 21, 22; Groups IIC and IIIC |
| IP Rating | IP68 |
| Operating Temperature | -60 degrees C to +60 degrees C |
| Operating Humidity | 10-100% |
| Power | PoE Class 3; DC input 22-26V; maximum 40.0W |
| Local Storage | microSD/SDXC slot; pre-installed 128GB AXIS Surveillance microSDXC card |
| Video Compression | H.264 with AXIS Zipstream |
| Analytics | AXIS Guard Suite (Motion Guard, Fence Guard, Loitering Guard, Perimeter Defender, Video Motion Detection, Gatekeeper, Active Tampering Alarm); ACAP support |
| Housing | Stainless steel 316L with integrated wiper and sunshield |
| Dimensions | 396 x 135 x 171 mm; weight 11,100 g |
| SoC / Memory | ARTPEC-6; 1024 MB RAM, 512 MB Flash |
Ideal Use Cases
Oil Refineries and LNG Terminals
Zone 1 and Zone 2 gas certification with IIC group rating covers hydrogen and acetylene atmospheres present in refinery and LNG processing environments. The IP68 housing and stainless steel 316L construction resist corrosive atmospheric conditions common at coastal or chemical process sites.
Offshore Platforms and Marine Facilities
The -60 degrees C to +60 degrees C operating range, IP68 sealing, and 316L stainless steel housing suit the persistent salt spray, humidity up to 100%, and temperature extremes of offshore oil and gas platform decks and marine terminal infrastructure.
Chemical and Pharmaceutical Manufacturing
Zone 21 and Zone 22 dust certification with IIIC group rating supports deployment in areas with combustible pharmaceutical powders or chemical dust. AXIS Fence Guard and Loitering Guard enable automated alerts for access into restricted process zones.
Mining Operations and Tunnels
The extreme temperature tolerance and explosion-proof housing cover surface mining operations in harsh climates as well as underground environments where methane or coal dust creates classified Zone classifications. The 32x zoom allows monitoring of extended tunnel sections or large open pit areas from a single fixed position.
Critical Infrastructure Perimeter Monitoring
AXIS Perimeter Defender and Fence Guard, combined with the 32x optical zoom, enable long-range perimeter detection at power generation facilities, tank farms, and pipeline infrastructure where intrusion events must be classified and logged accurately across extended boundary lines.
Choosing the Right Model
- Choose this model if: Your installation site is classified as Zone 1, 2, 21, or 22 for gas or dust explosive atmospheres, requires IIC or IIIC group certification, and benefits from long-range 32x optical zoom coverage from a fixed mounting point in a corrosion-resistant housing.
- Choose a different model if: Your site has no hazardous area classification requirement and you need a standard optical zoom box or PTZ camera. The ExCam XF Q1785 carries a significant cost premium directly attributable to its explosion-protection engineering; that investment is not justified where standard IP-rated cameras are permitted.
- Choose a different model if: Your application requires built-in infrared night vision for unlit outdoor areas with no supplementary lighting. This model depends entirely on ambient or external scene illumination for low-light performance.
- Choose a different model if: You need Zone 0 or Zone 20 certification, which covers the interior of explosive atmosphere sources. The ExCam XF Q1785 does not hold those zone classifications.
FAQs
- What hazardous area zones is the ExCam XF Q1785 certified for?
The camera is certified for Zones 1 and 2 (gas explosive atmospheres) and Zones 21 and 22 (dust explosive atmospheres). It covers gas groups IIC and IIIC, which are the highest risk groupings. Certifications include ATEX, IECEx, EAC, IA, INMETRO, PESO, and UKCA, covering international deployments across Europe, the UK, Australia, and other markets. - Does the camera require a separate explosion-proof enclosure?
No. The ExCam XF Q1785 is a self-contained explosion-protected camera. Its stainless steel 316L housing with integrated sunshield and wiper is itself the certified enclosure. There is no need for an additional flameproof housing or purge and pressurisation system, which simplifies installation in classified areas. - How does the 32x optical zoom work in practice for a fixed-mount camera?
The 4.3-137mm varifocal lens can be adjusted remotely via the camera’s web interface or a compatible VMS, shifting from a 60-degree wide-area view down to a 2.3-degree narrow field of view. This allows operators to refine the coverage zone after physical installation without re-entering the hazardous area, which is a significant operational advantage in classified environments. - What is the minimum light level this camera can operate in?
The ExCam XF Q1785 achieves a minimum colour illumination of 0.16 lux and a minimum black and white illumination of 0.03 lux using Lightfinder technology. There is no built-in infrared illuminator, so the camera relies entirely on existing ambient or dedicated site lighting. For fully unlit environments, external explosion-protected lighting will be required. - Does the camera support edge storage without a network recorder?
Yes. The ExCam XF Q1785 includes a microSD/SDXC slot and ships with a pre-installed 128GB AXIS Surveillance microSDXC card. This supports local continuous or event-triggered recording, which is useful for remote or intermittently connected industrial sites where a centralised recorder may not be reliably accessible at all times. - What analytics are available on the ExCam XF Q1785?
The camera ships with AXIS Guard Suite pre-installed, which includes AXIS Motion Guard, Fence Guard, Loitering Guard, Perimeter Defender, Video Motion Detection, Gatekeeper, and an active tampering alarm. The camera also supports the AXIS Camera Application Platform (ACAP), allowing installation of certified third-party analytics applications for more specialised industrial detection requirements. - What power does the ExCam XF Q1785 require and how is it connected?
The camera accepts PoE Class 3 input or a DC supply of 22-26V, with a maximum consumption of 40.0W. The higher power draw compared to a standard PoE camera reflects the requirements of the motorised zoom mechanism and the explosion-protected design. Installers should confirm that their PoE switch or injector supports Class 3 at the required wattage before specifying cabling infrastructure. This model is available through Security Wholesalers for Australian projects.
Additional Information






















