Product Overview
For architects, integrators, and installers mounting the 2N IP Solo intercom onto glass partition walls, the 2N IP Solo Glass Mount Backplate provides a clean, drill-free installation solution purpose-built for flat glass surfaces. This dual-sided architectural backplate uses high-bonding structural adhesive strips to fix firmly to glass without penetrating the panel, keeping glazed facades, frameless partitions, and shopfront glass fully intact. Compatible specifically with 2N IP Solo intercom models 01301-001 and 01302-001, it ensures a precise mechanical fit that aligns with the intercom frame geometry. Note that the standard backplate (01305-001) is also required to complete the installation. Measuring 4.055 x 4.961 inches and weighing just 0.11 lbs, it adds minimal bulk while delivering a finished, professional appearance suited to modern commercial interiors and glass-fronted premises.
Key Capabilities
Drill-Free Glass Mounting
High-bonding structural adhesive strips allow the backplate to adhere directly to flat glass panels without any drilling or cutting, preserving the integrity of glazed partitions and shopfronts during intercom installation.
Purpose-Built Compatibility
Engineered specifically for the 2N IP Solo intercom (models 01301-001 and 01302-001), this backplate provides a geometrically precise fit that generic mounting hardware cannot replicate, ensuring a secure and aligned installation.
Architectural Finish
The slim profile and considered dimensions (4.055 x 4.961 inches) deliver a clean, professional appearance on glass surfaces, meeting the presentation standards expected in corporate offices, reception areas, and modern commercial fitouts.
Lightweight Construction
At just 0.11 lbs, the backplate places minimal load on adhesive bonding points and the glass surface itself, reducing stress on the panel and maintaining long-term installation stability without additional mechanical support.
Best For
- Glass Partition Offices: Offices using frameless or framed glass partitions where drilling is not permitted can install the 2N IP Solo cleanly using this adhesive-mounted backplate.
- Retail and Commercial Shopfronts: Glass-fronted retail premises that require intercom access control at an entry point without compromising the integrity or appearance of the glazing.
- Architecturally Sensitive Installations: Projects where a finished, unobtrusive mounting solution is required to satisfy design or tenancy fitout standards on glass surfaces.
Why Choose the 2N IP Solo Glass Mount Backplate
The 2N IP Solo Glass Mount Backplate (02078-001) addresses a specific installation challenge that standard wall-mount accessories cannot solve: securing an intercom to a flat glass surface without drilling. Its high-bonding structural adhesive strips are rated for the load of the 2N IP Solo intercom and are designed to maintain grip on smooth glass over time. Because it is factory-matched to 2N IP Solo models 01301-001 and 01302-001, the frame alignment and panel geometry are exact, avoiding the gaps, misalignment, or flex that an improvised solution would introduce. For projects where glazing must remain undamaged and aesthetics are non-negotiable, this is the correct mounting path. Available at Security Wholesalers, the 02078-001 is a low-cost component that protects the overall quality of a professional intercom installation.
Buyer Decision Tips
Buyer Tip: The 02078-001 glass mount backplate does not replace the standard backplate. The 2N backplate (01305-001) is also required as part of the complete installation assembly. Before ordering, confirm you have both components. If your installation surface is a standard wall rather than glass, the glass mount backplate is not needed and the standard backplate alone will suffice.
Key Features & Technical Specifications
| SKU |
02078-001 |
| Product Type |
Glass mount backplate (mounting accessory) |
| Compatible Intercom |
2N IP Solo (models 01301-001 and 01302-001) |
| Additional Part Required |
2N Backplate 01305-001 (required for complete installation) |
| Mounting Method |
High-bonding structural adhesive strips – no drilling required |
| Surface Compatibility |
Flat glass panels |
| Dimensions |
4.055 x 4.961 inches |
| Weight |
0.11 lbs |
| Brand |
Axis Communications (2N) |
| GTIN |
8595159515878 |
Ideal Use Cases
Glass-Partitioned Office Buildings
Open-plan offices with internal glass partition walls benefit from the drill-free adhesive mount, allowing intercom placement at secure entry points without damaging the partition structure or voiding glazing warranties.
Retail Shopfront Entrances
Glass-fronted retail stores requiring visitor intercom access at the front door can mount the 2N IP Solo cleanly on the glazing panel without drilling, maintaining the shopfront appearance.
Corporate Reception Areas
Reception environments with glass security screens or lobby partitions where a professional, flush-mounted intercom installation is required to match the fitout standard of the space.
Leased Tenancy Fitouts
Commercial tenancies where lease terms prohibit structural modifications to glass or building fabric are well served by the adhesive-only mounting approach, allowing the intercom to be removed without permanent damage at end of lease.
Choosing the Right Model
- Choose this model if: You are installing a 2N IP Solo intercom (01301-001 or 01302-001) onto a flat glass partition or glass panel and need a no-drill mounting solution that preserves the glass surface.
- Choose a different model if: Your installation surface is a standard masonry, plasterboard, or timber wall – in those cases the standard 2N IP Solo backplate (01305-001) is the appropriate mounting component and the glass mount backplate is not needed.
FAQs
- Which 2N intercom models is the 02078-001 compatible with?
The glass mount backplate is compatible specifically with the 2N IP Solo intercom in models 01301-001 and 01302-001. It is not a universal intercom accessory and has not been confirmed as compatible with other 2N intercom products in the range.
- Does installation require drilling into the glass?
No. The 02078-001 uses high-bonding structural adhesive strips to adhere directly to flat glass panels. No drilling, cutting, or penetration of the glass is required, making it suitable for glazed surfaces where structural integrity must be maintained.
- Is this backplate all I need to complete the installation on glass?
No. The glass mount backplate (02078-001) works in combination with the standard 2N backplate (01305-001). Both parts are required for a complete installation assembly. The glass mount backplate alone is not sufficient to mount the 2N IP Solo intercom.
- What are the physical dimensions of the backplate?
The 02078-001 measures 4.055 x 4.961 inches and weighs 0.11 lbs. Its slim and lightweight form is designed to sit flush against glass surfaces without adding significant bulk or visual weight to the intercom installation.
- Where can I purchase the 02078-001 in Australia?
The 2N IP Solo Glass Mount Backplate is available through Security Wholesalers as part of the 2N intercom accessories range. It is recommended to order the standard backplate (01305-001) at the same time to ensure you have all components required for a complete glass panel installation.
