Product Overview
For installers fitting 2N IP intercom systems into brick or masonry walls, the Axis 2N IP Force IP Safety Brick Flush Mount Box provides a purpose-built steel housing that recesses the intercom panel cleanly into the wall surface. Designed specifically for use with the 2N IP Force and 2N IP Safety intercom systems, this flush mount box eliminates the need for custom fabrication and delivers a professional, flush-finished result at entry points across commercial and residential installations. Measuring 132 x 223 x 83 mm and constructed from steel with a silver finish, the box accommodates a single intercom panel and suits both indoor and outdoor environments. The 83 mm depth provides sufficient clearance for cable routing and secure mounting within standard brick cavity depths. It is supplied as an accessory only and does not include the intercom unit.
Key Capabilities
Flush Mount Integration
The box is engineered specifically for flush installation into brick or masonry, allowing the intercom panel to sit flush with the wall surface for a clean, professional finish at entry points rather than protruding on a surface-mount bracket.
Steel Construction
Fabricated from steel in a silver finish, the housing provides structural rigidity within the wall cutout and resists deformation during installation, maintaining accurate alignment of the intercom panel once mounted.
Confirmed Compatibility
Designed to house the 2N IP Force and 2N IP Safety intercom panels, ensuring the mounting geometry and cutout dimensions are matched to these specific units without modification or adapter plates.
Indoor and Outdoor Suitability
The box is rated for both indoor and outdoor installation environments, making it appropriate for external building entry walls, internal lobby walls, and gated access points exposed to varying conditions.
Best For
- Brick and Masonry Wall Entry Points: The 83 mm depth and steel construction make this box well suited to flush installations cut into standard brick walls at building entrances, gates, and lobby entry points.
- Commercial and Residential 2N Intercom Deployments: Installers fitting 2N IP Force or 2N IP Safety systems at office buildings, apartment complexes, or residential properties benefit from a factory-matched mounting solution that avoids custom fabrication.
- Outdoor Entry Columns and Pillars: The confirmed outdoor suitability means the box can be installed in exposed brick gateposts, entry columns, and exterior wall positions without requiring a separate weatherproof enclosure.
Why Choose the Axis 2N IP Force IP Safety Brick Flush Mount Box
Where a standard surface-mount bracket would leave the intercom panel protruding from the wall, this steel flush mount box creates a finished, recessed installation that looks intentional and is less vulnerable to accidental contact or tampering. The confirmed compatibility with both the 2N IP Force and 2N IP Safety means installers are not adapting a generic enclosure but using a matched housing with correct internal dimensions. At 132 x 223 x 83 mm and 0.45 kg, the box is easy to handle during the masonry preparation stage and positions the panel accurately once the wall cutout is complete. The silver finish aligns with the aesthetic of the 2N intercom panels it supports. Available through Security Wholesalers, this accessory is a straightforward addition to any 2N intercom installation order where flush mounting into brick or masonry is required.
Buyer Tip: Confirm your wall depth before ordering. The flush mount box requires 83 mm of clearance behind the wall face to seat correctly. For walls thinner than 83 mm, or for installations into timber stud frames or cavity plasterboard walls, a surface-mount bracket is a more appropriate solution. This box is designed specifically for solid brick or masonry walls.
Key Features & Technical Specifications
| Product Type | Flush mount brick installation box (intercom accessory) |
| Compatible Devices | 2N IP Force, 2N IP Safety |
| Dimensions | 132 x 223 x 83 mm (5.2 x 8.8 x 3.3 in) |
| Net Weight | 0.45 kg |
| Material | Steel |
| Colour | Silver |
| Mount Type | Flush mounted box |
| Panel Capacity | 1 panel |
| Installation Environment | Indoor and outdoor |
| Wall Type Suitability | Brick and masonry walls |
| Product Series | AXIS 2N Series |
| Country of Origin | Czech Republic |
| Alternative SKU | 9151001 |
| UPC/EAN | 617092719491 |
| NDAA Compliant | No |
Ideal Use Cases
Commercial Building Entrances
Office buildings and commercial premises with brick or masonry facade walls benefit from a flush-mounted 2N IP Force installation that presents a tidy, professional appearance at the main entry point.
Apartment and Residential Complex Entry
Multi-dwelling residential buildings with brick entry walls use this box to house 2N IP Safety or IP Force panels flush within the wall, keeping the intercom surface level with surrounding finishes.
Gated Property and Estate Access
Brick gateposts and entry columns at residential estates or gated properties provide a natural flush-mount location where the 83 mm depth of this box accommodates intercom wiring within the masonry structure.
Internal Lobby and Reception Walls
Indoor lobby walls constructed from brick or masonry can house the 2N IP Safety panel in this flush box, integrating the intercom station into the wall without visible surface-mounted hardware.
Choosing the Right Model
- Choose this model if: You are installing a 2N IP Force or 2N IP Safety intercom into a solid brick or masonry wall and require a flush-finished result with at least 83 mm of wall depth available for the box.
- Choose a different model if: Your wall is a timber stud frame, plasterboard cavity, or any surface with less than 83 mm of available depth. In these cases, a surface-mount bracket designed for the same 2N intercom units is the appropriate alternative. This box is also not suitable for 2N intercom models outside the IP Force and IP Safety range.
FAQs
- Which 2N intercom models is this flush mount box compatible with?
This box is confirmed compatible with the 2N IP Force and 2N IP Safety intercom systems. It is not designed as a universal intercom enclosure and should not be assumed to fit other 2N panel models without verification against the specific unit’s mounting dimensions. - How much wall depth is required for this box?
The box measures 83 mm in depth, which means the wall cutout must accommodate at least 83 mm of clearance behind the finished wall face. This is compatible with standard double-brick and many single-skin masonry wall constructions, but should be measured before cutting. - Can this box be used in an outdoor installation?
Yes. The box is confirmed suitable for both indoor and outdoor installations. However, the weather resistance of the installation relies on the IP rating of the 2N intercom panel being mounted into the box, not on the box itself, which is a passive steel enclosure. - Does this product include the 2N IP Force or 2N IP Safety intercom unit?
No. This is a mounting accessory only. The flush mount box must be ordered separately from the 2N intercom panel. When planning your installation, order the intercom unit and this box together. Security Wholesalers stocks both components across the AXIS 2N Series range. - What is the box made from and what does it weigh?
The box is constructed from steel with a silver finish and has a net weight of 0.45 kg. The steel construction provides a rigid, durable housing within the wall cutout and maintains accurate panel alignment once the intercom is fitted and secured.
Cabling Considerations
- Cable Routing: All cabling for the 2N IP Force or 2N IP Safety intercom, including network/PoE cable, should be routed into the wall cavity and through the back or sides of the flush mount box before the box is set into the masonry cutout. Plan conduit or cable entry points at the masonry stage before the box is permanently installed.
- Network Cable: The 2N IP intercom panels supported by this box connect via a standard Cat5e or Cat6 Ethernet cable for both network data and PoE power. Ensure the cable run from the nearest PoE switch or injector does not exceed the standard 100 m PoE limit.
- Wall Preparation: Cut the masonry opening to fit the box dimensions of 132 x 223 x 83 mm before installing. Route cables through before fixing the box in position, as access to the rear is restricted once the box is set flush into the wall.
- Wiring Tips: Leave adequate cable slack inside the box to allow the intercom panel to be pulled forward for servicing without stressing cable terminations. Secure the cable within the box using appropriate cable management clips to prevent movement over time.

















