Product SKU: 01706-001
Product Overview
For installers retrofitting Axis cameras onto existing wall infrastructure, the AXIS 01706-001 1.5″ NPS/NPT Male Coupler solves a common thread compatibility problem without requiring new mounts. This male-to-male coupler bridges any Axis pendant kit to a legacy mount that uses 1.5″ NPS or NPT female threads, preserving the existing wall bracket and reducing installation cost. Featuring a built-in tool hole, it allows the use of a spanner or similar tool to achieve proper torque when tightening, ensuring a secure and stable connection. Compatible with any Axis pendant kit, including the AXIS T94A01D Pendant Kit as a confirmed example, this coupler is a practical hardware solution for upgrade projects where removing or replacing the original wall mount is not desirable or not possible.
Key Capabilities
Male-to-Male Thread Coupling
Connects a male-threaded Axis pendant kit directly to a legacy wall mount with 1.5″ NPS or NPT female threads, making it possible to upgrade cameras without disturbing the existing mounting point.
Legacy Infrastructure Reuse
Designed specifically for retrofit scenarios, this coupler allows the original wall mount to remain in place, reducing installation labour and avoiding unnecessary drilling or wall repair during a camera upgrade.
Tool Hole for Secure Tightening
A dedicated hole built into the coupler allows a tool to be inserted, increasing torque and leverage during installation. This helps achieve a properly tightened fitting that resists loosening over time.
Broad Pendant Kit Compatibility
Compatible with any Axis pendant kit, this coupler integrates into existing Axis mounting ecosystems without requiring a custom bracket or non-standard adapter.
Best For
- Camera Upgrade Projects: Installers replacing older cameras at sites with existing 1.5″ NPS or NPT female-threaded wall mounts can reuse the original hardware rather than fitting entirely new brackets.
- Pendant Kit Installations: Any Axis pendant kit requiring a connection to a legacy mount with incompatible thread gender is resolved by this coupler without custom fabrication.
- Sites Where Wall Work Must Be Minimised: Commercial and heritage buildings where additional drilling or patching is undesirable benefit from the ability to retain and reuse the existing mount.
Why Choose the AXIS 01706-001
The AXIS 01706-001 addresses a specific and common problem in camera retrofit work: when a new Axis pendant kit presents a male thread and the legacy wall mount presents a female 1.5″ NPS or NPT thread, a direct connection cannot be made without an intermediate adapter. This coupler solves that in a single compact part. The built-in tool hole is a practical detail that distinguishes it from generic plumbing adapters, allowing controlled tightening rather than relying on hand torque alone. For integrators managing multi-site upgrades where wall mounts are already installed and cabling is routed, this coupler eliminates unnecessary remedial work. Available at Security Wholesalers as part of the Axis accessories range, the 01706-001 is a low-cost component that can prevent costly reinstallation on retrofit jobs.
Buyer Decision Tips
Confirm Thread Type Before Ordering: This coupler is designed for 1.5″ NPS or NPT female-threaded legacy mounts. NPS and NPT are both straight and tapered pipe thread standards respectively, and while this coupler is listed as compatible with both, verify the thread standard on your existing wall mount before ordering to ensure a correct fit.
Key Features & Technical Specifications
| Part Number |
01706-001 |
| Coupler Type |
Male-to-male |
| Thread Size |
1.5″ |
| Thread Standard |
NPS / NPT |
| Compatible Mount Thread |
Legacy mounts with 1.5″ NPS or NPT female threads |
| Compatible Pendant Kits |
Any Axis pendant kit (e.g. AXIS T94A01D Pendant Kit) |
| Tool Hole |
Yes – allows tool insertion for increased torque during tightening |
| Primary Application |
Retrofit camera installations reusing existing wall mounts |
| Brand |
Axis Communications |
| Category |
Mounts and Brackets / Accessories |
Ideal Use Cases
Commercial Building Camera Upgrades
Office buildings replacing ageing camera hardware can retain their ceiling or wall mounts by using this coupler to connect updated Axis pendant kits to the original 1.5″ female-threaded brackets.
Retail Site Retrofits
Retail environments where cameras are mounted on fixed ceiling drops benefit from this coupler, which allows the pendant mount to be reused while the camera head and kit are upgraded without structural changes.
Multi-Site Managed Upgrades
Integrators managing staged upgrades across multiple sites can standardise on this coupler to maintain consistent installation practices wherever 1.5″ NPS or NPT legacy mounts are present.
Heritage and Tenanted Spaces
Sites where drilling new fixing points is restricted by heritage requirements or tenancy agreements benefit from the ability to retain the existing mount using the 01706-001 rather than installing new brackets.
Choosing the Right Model
- Choose this model if: Your existing wall or ceiling mount has a 1.5″ NPS or NPT female thread and you need to connect an Axis pendant kit that presents a male thread, particularly on a retrofit project where the original mount is being kept in place.
- Choose a different model if: Your legacy mount uses a different thread size or non-pipe thread standard, or if you are installing into a fresh surface where a standard Axis wall mount or pendant adapter without a coupler would be the more direct solution.
FAQs
- What problem does the AXIS 01706-001 solve?
When an Axis pendant kit has a male thread and the existing legacy wall mount has a 1.5″ NPS or NPT female thread, a direct connection is not possible. This coupler bridges the two by providing a male-to-male adapter, allowing the pendant kit to attach to the legacy mount without replacing the bracket.
- Does this coupler work with all Axis pendant kits?
Yes. The 01706-001 is confirmed compatible with any Axis pendant kit. The AXIS T94A01D Pendant Kit is one documented example, but the coupler is designed as a universal solution across the Axis pendant kit range.
- What is the tool hole on the coupler used for?
The tool hole allows a spanner or similar tool to be inserted into the body of the coupler. This increases the leverage and torque available during tightening, helping achieve a secure connection that is less likely to loosen under the weight of a mounted camera assembly.
- Can I use this coupler on a new installation rather than a retrofit?
Yes, though its primary design intent is retrofit work. If a new installation involves a mount that presents a 1.5″ NPS or NPT female thread and you are using an Axis pendant kit, this coupler can serve as the connecting component regardless of whether the mount is new or legacy.
- Where can I purchase the AXIS 01706-001 in Australia?
The AXIS 01706-001 1.5″ NPS/NPT Male Coupler is available through Security Wholesalers as part of the Axis Communications accessories range. It is stocked alongside compatible Axis pendant kits and mounting hardware to simplify procurement for retrofit and new installation projects.
Additional Information
No additional downloads available for this product.
