Activor RRW01 Outdoor Wiegand 26-Bit 4 Channel Remote Receiver IP65‍‌​​‌​​‌‌​​‌​​‌​‌‌‌‍

Product SKU: RRW01

Product Overview

The Activor RRW01 Outdoor Wiegand 26-Bit 4 Channel Remote Receiver IP65 is an outdoor remote receiver designed for compatible access control systems requiring Wiegand remote control integration. It supports Wiegand 26-bit output across four channels, allowing compatible remote transmitters to pass user or channel data into access control equipment that accepts Wiegand input. The RRW01 operates on 433MHz, with other frequencies available on request, and includes selectable site-code-verification or non-code-verification pass-through operation depending on system requirements. Each channel includes an onboard LED to indicate data passage, helping installers confirm activity during setup and service. With IP65 protection, 9–15VDC operation and a 190mm x 100mm x 45mm enclosure size, it is a practical outdoor Wiegand receiver for compatible commercial access control installations.

Key Capabilities

Best For

• Access Control Remote Integration: Suitable for compatible systems requiring remote control input via Wiegand 26-bit output.
• Outdoor Receiver Locations: IP65 protection makes it suitable for appropriate exposed or semi-exposed receiver mounting locations.
• Gate and Door Access: Practical for compatible access control systems where remote triggering or user identification is required.
• Multi-Channel Control: Four channels support flexible integration where several remote functions or outputs are required.
• Site Code Management: Useful where the installer needs either site-code verification or all-pass-through operation.

Why Choose the RRW01

Choose the Activor RRW01 when a compatible access control system needs an outdoor Wiegand receiver with four-channel 26-bit operation. Its 433MHz receiver design, IP65 enclosure, selectable site-code-verification options and onboard data passage LEDs help support reliable installation, service and system integration. The four-channel design makes it useful for access control projects where remote transmitters need to communicate with compatible Wiegand controllers rather than simple relay-only receivers. This model, supplied by Security Wholesalers, is a practical choice for commercial access control installations requiring outdoor remote receiver functionality with Wiegand output.

Buyer Decision Tips

Key Features & Technical Specifications

Ideal Use Cases

Choosing the Right Model

• Choose this model if: You need an outdoor IP65 Wiegand 26-bit, 4 channel remote receiver for compatible access control systems.
• Choose an indoor receiver if: The receiver will be installed inside a protected area and outdoor IP65 protection is not required.
• Choose a relay receiver if: The installation requires direct relay output control instead of Wiegand data output.
• Check controller compatibility: Confirm the access controller accepts Wiegand 26-bit input and supports the intended channel or site-code configuration.
• Check mounting location: Confirm signal range, cable route, enclosure sealing, power supply and protection from unnecessary environmental exposure before installation.

FAQs

1. What is the Activor RRW01 used for?
   The Activor RRW01 is used as an outdoor Wiegand remote receiver for compatible access control systems. It receives compatible remote control signals and outputs Wiegand 26-bit data to a suitable controller.
2. How many channels does the RRW01 support?
   The RRW01 supports four channels. Each channel includes an onboard LED to indicate data passage, which helps installers confirm activity during setup, testing and troubleshooting.
3. What frequency does the RRW01 use?
   The RRW01 operates at 433MHz. The supplied information also states that other frequencies are available on request, so project-specific frequency requirements should be confirmed before ordering.
4. Does it support site-code verification?
   Yes. The RRW01 provides the option of site-code-verification or non-code-verification all-pass-through operation. The correct mode should be selected according to the access control system design.
5. Is the RRW01 suitable for outdoor installation?
   Yes. The RRW01 is listed as the outdoor version and has an IP65 rating. Correct installation, sealing, cable entry and mounting position are still important to maintain suitable protection.
6. What power does it require?
   The RRW01 operates from 9–15VDC and draws 15mA. The connected power supply or access control panel output should be checked to ensure it can support the receiver.
7. Is this the same as a relay receiver?
   No. The RRW01 is a Wiegand receiver, not a simple relay receiver. It is best suited to compatible access control systems that require Wiegand 26-bit data input from remote transmitters.
8. What should I check before buying the RRW01?
   Before buying the RRW01, confirm Wiegand 26-bit controller compatibility, required channel setup, site-code-verification mode, frequency, power supply and outdoor mounting requirements. This model is available through Security Wholesalers for compatible access control remote receiver applications.

Additional Information

Activor Wiegand-Remote-Brochure