Product Overview
Combining full-colour night vision, active deterrence, and plug-and-play PoE recording in a single ready-to-install package, this Hikvision ColorVu LiveGuard kit is designed for property owners and installers who need a complete outdoor surveillance system without piecing together individual components. The kit bundles 4 x DS-2CD2347G2-LSU/SL 4MP turret cameras with a DS-7604NI-I1-4P 4-channel PoE NVR pre-loaded with a 3TB hard drive. Each camera delivers 24/7 full-colour footage using white LED illumination, with AcuSense deep learning to filter out irrelevant motion triggers. The LiveGuard feature adds a visible strobe light and audible alarm that can activate on detection, functioning as an active deterrent before an incident escalates. With H.265+ compression, IP67 weather resistance, 120dB WDR, and built-in microphone and speaker on every camera, this kit suits driveways, shopfronts, car parks, and residential perimeters where colour-accurate overnight coverage matters.
Key Capabilities
ColorVu Full-Colour Night Vision
Each DS-2CD2347G2-LSU/SL uses white LED illumination to deliver vivid, full-colour images around the clock, including at night. Unlike infrared cameras that produce monochrome footage, this system captures colour detail such as clothing, vehicle colour, and signage in low-light outdoor conditions.
AcuSense AI Detection
Powered by deep learning, AcuSense classifies motion events by human or vehicle targets. This reduces nuisance alerts caused by animals, foliage, or passing headlights, so notifications and recordings are triggered by activity that actually warrants attention at driveways, entries, and perimeter boundaries.
LiveGuard Active Deterrence
The built-in strobe light and audio alarm on each camera can be triggered automatically on detection or activated manually. This turns the camera from a passive recording device into an active deterrent, alerting intruders that they have been seen, which is particularly effective at entry points and car parks.
Plug-and-Play PoE System
The DS-7604NI-I1-4P NVR includes 4 built-in PoE ports, delivering both power and data over a single Cat 5e or Cat 6 cable run to each camera. No separate power supplies or injectors are needed at each camera location, simplifying installation at shopfronts, homes, and small commercial sites.
3TB Pre-Installed Storage
The NVR ships with a 3TB surveillance-grade hard drive already installed. Combined with H.265+ compression from each camera, this provides extended local recording capacity without requiring an immediate storage upgrade, making it a practical out-of-the-box setup for 4-camera installations.
Two-Way Audio on Every Camera
Each DS-2CD2347G2-LSU/SL includes a built-in microphone and speaker, enabling two-way voice communication through the camera. This supports remote interaction via compatible apps or the NVR interface, which is useful at entry gates, shopfronts, or residential driveways where verbal communication with visitors or intruders may be needed.
Best For
- Residential Driveways and Perimeters: The LiveGuard strobe and AcuSense human detection combination makes this kit well matched to homes where overnight deterrence and colour-accurate footage of approaching vehicles or people is a priority.
- Shopfronts and Small Commercial Premises: 4 PoE turret cameras with full-colour night vision cover front entries, side access points, and outdoor signage areas without requiring a separate power run to each location.
- Car Parks and Outdoor Storage Areas: ColorVu preserves vehicle colour detail at night, while AcuSense filters motion from passing headlights, reducing irrelevant alerts in busy outdoor environments.
- Installers Completing 4-Camera PoE Deployments: The pre-matched camera and NVR combination, 3TB drive included, removes the guesswork from component selection and ensures AcuSense features are fully supported across the system from day one.
Why Choose the DS-2CD2347G2-LSU/SL + DS-7604NI-I1-4P Kit
Where a standard 4-camera PoE kit records in colour only during daylight hours, this system maintains full-colour output around the clock through the white LED illuminators built into each DS-2CD2347G2-LSU/SL. Adding AcuSense deep learning detection means the system actively classifies human and vehicle targets rather than triggering on every motion event, which directly reduces alert fatigue. The LiveGuard strobe and audio alarm takes this further by enabling a real-time response at the point of detection. The DS-7604NI-I1-4P NVR provides a GUI 4.0 interface, 4K HDMI output for monitor viewing, and a 40Mbps recording bandwidth that supports all 4 cameras at full 4MP resolution simultaneously. With a 3TB drive pre-installed and all cameras supplied ready to connect, this kit is available through Security Wholesalers as a complete solution requiring no additional components to begin recording.
Package Inclusions
Buyer Decision Tips
Lens Selection: The DS-2CD2347G2-LSU/SL cameras are available in 2.8mm and 4mm fixed lens options. A 2.8mm lens provides a wider field of view suited to covering broad entry areas, shopfronts, or open car parks. A 4mm lens narrows the angle to provide more reach along a driveway, fence line, or corridor. If each camera location has different framing requirements, note your preferred lens per camera in the order comments at checkout, as stated in the product listing.
Channel Expansion: The DS-7604NI-I1-4P is a 4-channel NVR. If you anticipate adding cameras beyond the 4 included in this kit, a larger NVR will be required. An 8-channel upgrade is noted as an available option at additional cost. Plan your total camera count before committing to the NVR channel size, as replacing the NVR later is less efficient than selecting the correct size upfront.
Key Features & Technical Specifications
| Camera Model |
DS-2CD2347G2-LSU/SL (2nd Generation ColorVu) |
| Camera Resolution |
4MP |
| Camera Housing |
Outdoor turret |
| Night Vision Type |
ColorVu white LED, full colour 24/7 |
| IR / LED Range |
30m white LED illumination |
| Lens Options |
2.8mm or 4mm fixed |
| AI / Analytics |
AcuSense deep learning – human and vehicle target classification |
| Active Deterrence |
LiveGuard – built-in strobe light and audio alarm |
| Audio |
Built-in microphone and built-in speaker (two-way audio capable) |
| WDR |
120dB |
| Weather Rating |
IP67 |
| Video Compression |
H.265+ |
| NVR Model |
DS-7604NI-I1-4P |
| NVR Channels |
4-channel |
| PoE Ports |
4 x built-in PnP PoE ports |
| NVR Bandwidth |
40Mbps incoming |
| NVR Output |
4K HDMI and VGA |
| HDD Bays |
1 HDD bay |
| Included Storage |
3TB surveillance-grade HDD pre-installed |
| NVR Interface |
Hikvision GUI 4.0, AcuSense camera support |
Ideal Use Cases
Residential Driveways
The 30m white LED range and full-colour imaging captures vehicle and visitor detail after dark along a driveway approach, while the LiveGuard strobe provides a visible response to AcuSense-confirmed human or vehicle detection events.
Retail Shopfronts
Full-colour night footage preserves clothing and facial colour detail outside a shopfront after close of business. AcuSense reduces false triggers from passing pedestrians or vehicle headlights, keeping alert volumes manageable for retail staff monitoring remotely.
Small Business Car Parks
4 turret cameras positioned at entry and exit points and across bays provide coverage of vehicle movement and foot traffic. ColorVu retains colour information on vehicles at night, which is useful for identifying vehicle colour when reviewing incidents.
Warehouse Entry and Loading Dock Areas
IP67-rated cameras handle the dust and moisture exposure common to industrial access points. The LiveGuard audio alarm and strobe can deter after-hours entry attempts, and AcuSense ensures alerts are tied to human or vehicle movement rather than environmental motion.
Rental and Investment Properties
The plug-and-play PoE design simplifies installation at properties where minimising on-site labour time is a factor. With 3TB storage pre-installed and all cameras pre-matched to the NVR, the system is ready to record on the day of installation without additional configuration overhead.
Choosing the Right Model
- Choose this kit if: You need a fully matched 4-camera outdoor system with full-colour night vision, active deterrence via strobe and audio alarm, AI-based human and vehicle detection, two-way audio on every camera, and a pre-installed 3TB drive, all connected through a single PoE NVR.
- Choose a different kit if: You need more than 4 camera positions – an 8-channel PoE NVR kit would be more appropriate as this NVR supports only 4 channels with no expansion capacity on the same unit. If active deterrence features are not required and budget is a primary concern, a standard ColorVu turret kit without LiveGuard may be a more cost-efficient fit.
FAQs
- Does this kit record in colour at night without any external lighting?
Yes. Each DS-2CD2347G2-LSU/SL uses built-in white LED illuminators with a 30m range to produce full-colour footage in complete darkness. No external lighting is required. This is the core function of ColorVu technology and applies to all 4 cameras in this kit.
- What does the LiveGuard feature actually do when motion is detected?
LiveGuard activates a built-in strobe light and audio alarm on the camera when a detection event occurs. This can be triggered automatically on AcuSense-confirmed human or vehicle detection, or activated manually through the NVR or mobile app. It is designed to alert an intruder that they have been detected in real time, rather than simply recording passively.
- How does AcuSense reduce false alarms on these cameras?
AcuSense uses deep learning algorithms trained to distinguish human and vehicle shapes from other motion sources such as animals, wind-blown foliage, or changing light conditions. Only human or vehicle-classified events trigger push notifications and alarm actions, which significantly reduces the volume of irrelevant alerts compared to standard motion detection.
- Does the NVR require any additional hard drive before it can start recording?
No. The DS-7604NI-I1-4P NVR in this kit ships with a 3TB surveillance-grade hard drive pre-installed. The system can begin recording immediately after cameras are connected via PoE, without purchasing or fitting a separate drive.
- Can I mix 2.8mm and 4mm lenses across the 4 cameras in this kit?
Yes. The product listing specifically states that if different lens options are required for each camera position, you can specify your preferences in the order comments at checkout and the correct cameras will be dispatched. This allows each camera to be matched to its specific coverage requirement.
- What cable type is needed between the NVR and each camera?
The NVR delivers power and data over a single Cat 5e or Cat 6 Ethernet cable to each camera via its built-in PoE ports. Standard maximum PoE cable run length is 100 metres per camera. No coaxial cable or separate power wiring is required at any camera location.
- Is this kit available for purchase and delivery across Australia?
Yes. This kit is part of the Security Wholesalers range and is available for purchase with delivery to locations across Australia. Camera lens preferences can be specified at the time of ordering, and an 8-channel NVR upgrade option is also listed for sites requiring additional camera capacity. Contact the Security Wholesalers team for specific delivery or configuration queries before purchasing.
Cabling Considerations
- Cable Type: Cat 5e or Cat 6 Ethernet cable is required between the NVR PoE ports and each camera. A single cable carries both power and video data to each turret camera.
- Maximum Cable Run: Standard PoE maximum cable run is 100 metres per camera from the NVR PoE port. Plan camera positions within this distance of the NVR location to avoid signal or power degradation.
- PoE Considerations: The DS-7604NI-I1-4P has 4 dedicated PnP PoE ports. No external PoE switch or injector is required for the 4 cameras included in this kit. If additional cameras are added via an expanded NVR, check the PoE power budget of the replacement NVR before connecting multiple high-draw cameras.
- Wiring Tips: Route cable through conduit at outdoor wall penetrations and eave entry points to protect against UV degradation and vermin damage. Use weatherproof cable entry grommets at each camera mount point to maintain the IP67 rating of the installation. Label each cable run at the NVR end during installation to simplify any future servicing.
Product Video Samples
Additional Information
Select Your Choices & Add To Cart!
Hikvision Warranty
3-Year Manufacturer Warranty
All Hikvision IP cameras and recording devices (NVRs/DVRs) are covered by a
3-year back-to-base manufacturer warranty.
Note: Disk drives are limited to a 1-year warranty.
Our warranty is limited to the replacement of faulty items or parts
and does not include damage caused by incorrect fitting of parts or accessories.
(a) Australian Consumer Law (ACL)
Certain legislation, including the Australian Consumer Law (ACL) in the
Competition and Consumer Act 2010 (Cth), and similar consumer protection
laws and regulations may confer you with rights, warranties, guarantees, and remedies
relating to the provision of goods or services to you by us via the Site which cannot
be excluded, restricted, or modified. Our liability is governed solely by the ACL and
these Terms.
(b) Goods
If you are a consumer as defined in the ACL, the following notice applies to you:
“Our goods come with warranties and guarantees that cannot be excluded under the
Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or
a refund for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major
failure.”
(c) Our Warranties
To the extent permitted by law, we exclude all express and implied warranties,
and all material and work is provided to you without warranties of any kind,
either express or implied. We expressly disclaim all warranties including but
not limited to implied warranties of merchantability and fitness for a particular
purpose.
(d) Manufacturer Warranties
Certain products, including particular models of IP security cameras and DVR/NVR
equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is
in addition to but may overlap with any rights and remedies you may have under
applicable law, including any Consumer Guarantees. If you are not considered a
“consumer” within the meaning of the ACL, the manufacturer’s warranty may be your
sole remedy. Many manufacturers’ warranties do not apply in a business or commercial
setting. Please contact the manufacturer if you would like to make a claim under
the manufacturer’s warranty.
(e) Repair, Replacement, or a Refund
If you wish to seek repair, replacement, or a refund for a product, please
contact us and we will explain the requirements to you. This may include you
providing evidence of the faulty product to us.
(f) Refund
You are not entitled to a refund for change of mind. If you are entitled to a
refund, we will only provide it once evidence of the faulty product is received
by us, or once we have received the product at our warehouse and inspected it
to assess whether it is eligible for a refund under these Terms. Any refund we
make will be by the same payment method used to purchase the product.
(g) Installed Products
Subject to this clause, we will not accept for return any product that has been
used, connected, installed, attempted to be connected or installed, or if your
product is custom-made or is a special buy product.
(h) Packaging
You must adequately package any product you are returning for our collection
to ensure that it is not damaged during return delivery to our warehouse. You
are also responsible for arranging the return delivery and the costs involved.
(i) Duty of Care
You have a duty of care for the product while it is in your possession. If
you damage products and then subsequently return them, you may be liable to pay
to repair the product to its original condition. In these circumstances, where
a repair is not economically viable, no refund will be made.
For more terms & conditions, please visit www.securitywholesalers.com.au/terms-and-conditions
