Hikvision Cameras - World's Leading CCTV Manufacturer
“4G Dialler”
Worried about the absence of PSTN phone lines with the NBN roll out? Then worry no more as Ness has the solution with our 4G GSM Dialler.
The Ness 4G Dialler provides a 3G or 4G pathway for alarm diallers to communicate in the absence of a land line. Ideal for “Naked phone line” households, remote locations and anywhere you need easy and reliable cellular dialler monitoring.
This unit provides support for any dialler that reports to any Central Monitoring Station (without a need to any special control room receiver) or can dial an alarm event to a personal number, in the same fashion as it would if a land line was available.
Also includes a back up battery to allow operation in the event of mains power failure.
No programming of GSM Dialler required, just plug and go.
Supplied with plug pack power supply, 4G Antenna.
SPECIFICATIONS
| GSM Compatibility | 3G/4G |
| AU Frequencies Supported MHz | 4G Telstra B1 2100, B3 1800, B7 2600, B8 900, B28 700 Optus B1 2100, B3 1800, B7 2600, B28 700, B40 2300 Vodafone B1 2100, B3 1800, B5 850 3G Telstra B5 850 Optus B8 900, B1 2100 Vodafone B1 2100 |
| SIM CARD | Standard size SIM – Not supplied |
| Alarm Panel compatibility | Compatible with most alarm diallers in Contact ID DTMF and Voice formats, Including all Ness systems (e.g. D8X/D16X Series, D8xD / D16XD Series, SmartLiving Series and M1 Series) |
| Operation Voltage | 12VDC (Plug Pack Supplied) |
| Battery Backup | Internal rechargeable Battery (Included) |
| Battery Backup Time max. | 2-3 Hours on its own internal battery. |
| Power Consumption | 25mA (Standby), 300mA (Communicating) |
| Antenna | 3dB whip with magnetic base and 2.9m Cable length |
| Dimensions | 175 x 115 x 35 mm |
| Weight | 370g |
| Operation Temperature | 0°C to +50°C |
IMPORTANT NOTES
• This product is designed to provide a cellular pathway for alarm control panels with landline diallers in the absence of landlines.
• Not intended for industrial use.
• Not recommended for use in lift cars or other non-stationary situations.
• Ensure that the location has adequate cellular signal and test operation after installation.
• The unit must be tested weekly to verify cellular reception and correct operation.
• The 12V plug pack supplied must be used. Do not connect to an unregulated or ‘noisy’ power supply.