2N IP Verso 3-Module Surface Mounting Frame Nickel Silver for IP Verso and LTE Verso Intercoms

$204.60
FREE DELIVERYWARRANTY GUARANTEED
SW ADVANTAGE✓ Trade-Price Verified✓ Priority Tech Support✓ Dedicated After-Sales Support✓ Easy Returns & Warranty

2N IP Verso | 3-Module Surface Mounting Frame | Nickel Silver

The 2N IP Verso 3-Module Surface Mounting Frame provides a clean, secure surface mounting solution for 2N IP Verso and LTE Verso intercom systems. Finished in nickel silver, it accommodates a 3-module configuration and neatly conceals wired connections for a professional installation appearance. Manufactured in the Czech Republic, the frame measures approximately 13 x 10.7 x 2.8 cm and no additional accessories are required for surface installation.

Key Features

  • Surface Mount Design: Enables clean surface installation of 2N IP Verso and LTE Verso intercom modules without additional accessories.
  • 3-Module Configuration: Supports a 3-gang layout to accommodate multi-module intercom setups.
  • Nickel Silver Finish: Offers a premium, modern aesthetic suited to commercial and residential entry points.
  • Cable Concealment: Effectively hides wired connections behind the frame for a tidy, professional finish.
  • Broad Compatibility: Compatible with 2N Access Unit 2.0, IP Verso, and LTE Verso intercom systems.
  • Czech Manufacture: Produced in the Czech Republic to 2N quality standards.

 

$204.60 inc GST +3 Year Warranty & Support

Product Overview

For installers surface-mounting a 2N IP Verso or LTE Verso intercom system, the 2N IP Verso 3-Module Surface Mounting Frame in Nickel Silver provides a clean, professional finish that conceals cable connections at the wall. Rather than a flush-cut recess, this frame sits proud of the surface, making it the correct choice when conduit or in-wall wiring cannot be fully buried. Manufactured in the Czech Republic and finished in a brushed nickel silver tone, it accommodates a 3-module intercom stack and aligns with the 2N IP Verso ecosystem. Measuring approximately 13 x 10.7 x 2.8 cm, it provides the structural depth needed to house wiring neatly behind the unit. Compatible with the 2N Access Unit 2.0, IP Verso, and LTE Verso, it integrates directly without additional mounting adapters or secondary hardware.

Key Capabilities

Surface Mount Installation

Designed specifically for installations where cabling runs along the surface rather than inside the wall. The frame creates a contained housing for wiring at the wall face, eliminating exposed conduit and producing a tidy finished look at entry points and foyer walls.

3-Module Configuration

Built to house a 3-module 2N IP Verso intercom stack, this frame supports the full depth and width of a triple-module unit. It accommodates combinations such as a keypad, card reader, and camera module within a single structured mounting assembly.

Nickel Silver Finish

The brushed nickel silver colouring coordinates with premium architectural hardware and suits commercial building entrances, office lobbies, and mixed-use developments where aesthetics are part of the design specification. It avoids the institutional appearance of plain grey or black mounting frames.

Broad System Compatibility

Confirmed compatible with the 2N IP Verso, 2N LTE Verso, and 2N Access Unit 2.0, so it suits both IP network intercom installations and LTE-connected deployments without requiring a different frame or adapter for each variant.

Best For

  • Surface-Wired Entry Installations: Where cabling arrives at the wall face via conduit rather than a flush-routed cavity, this frame conceals connections neatly without requiring structural wall work.
  • Commercial and Office Foyers: The nickel silver finish suits architecturally finished entry areas where a standard grey frame would look out of place alongside quality door hardware and signage.
  • Multi-Module Intercom Stacks: Any 2N IP Verso deployment requiring 3 intercom modules needs a frame dimensioned correctly for that configuration rather than a single or dual-module housing.

Why Choose the 2N IP Verso 3-Module Surface Mounting Frame Nickel Silver

The 01291-001 is the purpose-built surface mounting solution for 3-module 2N IP Verso and LTE Verso intercom assemblies. Where a generic bracket or aftermarket housing may leave cable runs exposed or fail to align correctly with the intercom module slots, this frame is dimensioned at 13 x 10.7 x 2.8 cm to match the 3-module stack precisely. The nickel silver finish is not an afterthought: it coordinates directly with the intercom’s own hardware palette, producing a cohesive appearance at the door. No additional mounting hardware is required for surface installation, reducing parts counts on the job. It is also compatible with the 2N Access Unit 2.0, giving it broader application across the 2N ecosystem. Available at Security Wholesalers, it is the correct choice when the installation site cannot accommodate flush-mounted conduit but still demands a finished, professional result.

Buyer Decision Tips

Surface vs. Flush Mount: Before ordering, confirm whether the wall at the installation point has a prepared cavity or recess for the intercom, or whether cabling arrives via surface conduit. This frame is for surface mounting only. If conduit is concealed inside the wall and a flush finish is required, a flush-mount frame is the correct product. Ordering the wrong type requires a return and can delay commissioning.

Key Features & Technical Specifications

Product Type Surface mounting frame for 2N IP Verso intercom systems
Module Configuration 3-module
Finish / Colour Nickel Silver
Material Nickel
Dimensions (metric) 13 x 10.7 x 2.8 cm (H x W x D)
Dimensions (imperial) 5.1 x 4.2 x 1.1 in
Depth 1.10 in / 2.8 cm
Height 13.30 in / 33.8 cm (product listing dimension)
Number of Gangs 3
Mount Type Surface mount
Compatible Systems 2N IP Verso, 2N LTE Verso, 2N Access Unit 2.0
Country of Origin Czech Republic
UPC 8595159503882
Brand 2N (Axis Communications product line)

Ideal Use Cases

Commercial Building Entry

Office buildings and commercial premises where the IP Verso is mounted at a main entry door and surface conduit is used throughout. The nickel silver finish maintains a professional appearance in high-footfall lobbies.

Multi-Tenanted Residential Buildings

Apartment complexes and strata buildings where the intercom panel is installed on a rendered or brick wall surface and concealing cabling inside the wall is not practical during a retrofit or staged fitout.

LTE-Connected Remote Entry Points

Sites using the 2N LTE Verso for cellular-connected intercom access, where network cabling is not routed through the wall but antenna and power lines are managed via surface conduit on the exterior.

Heritage or Hard-Surface Buildings

Installations on heritage facades, concrete, or masonry walls where chasing cable routes is restricted. The 2.8 cm depth of this frame provides enough clearance for cable terminations without wall penetration beyond a single fixing point.

Choosing the Right Model

  • Choose this model if: You are installing a 3-module 2N IP Verso or LTE Verso intercom on a surface-wired wall and need a finished frame that conceals cable connections while presenting a nickel silver finish to match the intercom hardware.
  • Choose a different model if: Your installation uses a wall cavity with flush-routed conduit and you need a flush-mount frame, or if your intercom configuration uses fewer than 3 modules and requires a 1-module or 2-module frame instead.

FAQs

  1. What intercom systems is the 01291-001 compatible with?
    This surface mounting frame is confirmed compatible with the 2N IP Verso, 2N LTE Verso, and 2N Access Unit 2.0. It is designed specifically for the 2N IP Verso ecosystem and should not be assumed to fit other intercom brands or unrelated 2N product lines without verification.
  2. What does “surface mount” mean for this frame?
    Surface mounting means the frame is fixed directly to the wall face, sitting proud of the surface rather than recessing into a cavity. It is the correct installation method when cabling cannot be concealed inside the wall, such as on brick, concrete, or heritage surfaces where chasing is not possible.
  3. How many intercom modules does this frame support?
    This frame is configured for 3 modules. The 2N IP Verso is a modular system, and each frame is sized for a specific module count. If your installation uses 1 or 2 modules, a different frame size is required. This 3-module version accommodates combinations such as a display module, keypad, and card reader in a single housing.
  4. What are the physical dimensions of this frame?
    The frame measures approximately 13 x 10.7 x 2.8 cm. The 2.8 cm depth is relevant for installations where there is limited clearance between the wall surface and the door frame or adjacent structure, as the intercom assembly will project that distance from the wall.
  5. Is this frame available in other colours or finishes?
    This listing is for the Nickel Silver finish. The 2N IP Verso mounting frame range includes other finishes; however, only the Nickel Silver 3-module surface mount variant (01291-001) is confirmed in this product listing. For other colour options, check the full 2N accessories range through Security Wholesalers to confirm current availability.

Cabling Considerations

  • Cable Type: The 2N IP Verso intercom typically requires a Cat5e or Cat6 Ethernet cable for IP network connection and PoE power delivery. Confirm cable specification against the intercom unit’s installation manual before running cable.
  • Surface Conduit: Because this is a surface mounting frame, cabling should be routed in appropriate surface conduit to the frame entry point. The 2.8 cm frame depth provides clearance for cable terminations inside the housing behind the intercom modules.
  • Maximum Cable Run: PoE cable runs for the 2N IP Verso should not exceed 100 m from the PoE switch or injector to the intercom unit, as per standard IEEE 802.3 PoE specifications. Refer to the intercom’s installation manual for confirmation.
  • Wiring Tips: Terminate and test the Ethernet cable before securing the mounting frame to the wall. The surface frame conceals the cable exit point, so access for re-termination is limited once the intercom modules are assembled into the frame. Plan cable slack of at least 15-20 cm inside the frame depth.
SKU: 01291-001 Category:

Black Friday Week Starts Now. • Use code BLACKFRIDAY to get even better savings on orders over $800 ;) COPY CODE Trade Customers: Log In or Register to Unlock Even Better Prices

Save & Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)

2N IP Verso 3-Module Surface Mounting Frame Nickel Silver for IP Verso and LTE Verso Intercoms
$204.60 inc GST +3 Year Warranty & Support