Product Overview
Expanding an existing 2N IP Verso intercom installation with contactless access control is straightforward with the 2N IP Verso 2.0 RFID Card Reader Module. This second-generation add-on module connects directly to the 2N IP Verso or LTE Verso intercom and introduces 13.56 MHz RFID card and fob reading with broader card type compatibility and improved read distance and response time compared to its predecessor. It supports a wide range of secured card technologies including MIFARE DESFire, HID iClass, HID Seos, FeliCa, 2N Mobile Key, and NFC-based credentials via Android devices running version 4.3 or higher. It also reads PACS ID, making it suitable for environments with existing corporate card infrastructure. Rated IP54 for dust and water ingress resistance and IK08 for mechanical impact, the module is built for outdoor-exposed intercom installations at building entrances, gates, and secured lobbies. Power is supplied via PoE, eliminating the need for a separate power feed. Firmware version 2.13 or higher is required on the host intercom.
Key Capabilities
Broad 13.56 MHz Card Compatibility
Supports ISO14443A and ISO14443B, MIFARE DESFire, HID iClass, HID Seos, iClass SE, MIFARE SE, FeliCa, ST SR(IX), and 2N Mobile Key. This range of supported credential types makes it compatible with many existing corporate and institutional card systems without requiring card re-issuance.
NFC and Mobile Credential Support
NFC/HCE compatibility allows Android 4.3 and later devices to function as access credentials via 2N Mobile Key. This provides a practical option for sites where staff access via smartphone is preferred alongside or instead of physical cards.
PACS ID Reading
The module reads PACS ID from supported cards, which is important for organisations integrating with existing physical access control systems. This avoids the need to reprogram or replace credential cards already in use across the facility.
IP54 and IK08 Rated Housing
IP54 dust and water resistance makes the module suitable for outdoor intercom positions exposed to weather. IK08 impact resistance adds protection at high-traffic entry points where the reader may be subject to accidental or deliberate contact.
PoE Powered Module
Power is delivered over the same Ethernet connection as data, keeping cabling clean and installation simple. No dedicated power supply is needed at the intercom position, which reduces conduit runs and simplifies retrofits in existing wiring infrastructure.
Best For
- Corporate and Institutional Entrances: PACS ID reading and support for HID iClass, HID Seos, and MIFARE DESFire credentials make this module compatible with many existing enterprise card systems.
- Outdoor Intercom Installations: IP54 and IK08 ratings suit exposed positions at building entrances, car park barriers, and gated access points where weather and physical contact are ongoing factors.
- Sites Requiring Mobile Credential Access: NFC/HCE support via 2N Mobile Key allows Android smartphone credentials to be used alongside physical cards, reducing card issuance overhead for some user groups.
- Upgrading Existing 2N IP Verso Systems: Designed as a direct module for the 2N IP Verso and LTE Verso intercom, this provides a straightforward path to adding RFID access control to an already-installed intercom without replacing the base unit.
Why Choose the 2N IP Verso 2.0 RFID Card Reader Module
The 2N IP Verso 2.0 RFID Card Reader Module (02141-001) is the second-generation version of the standard RFID module for the 2N IP Verso platform, bringing measurable improvements in read speed and read distance over the first generation. Its support for PACS ID and a broad range of 13.56 MHz credential types means sites that already operate HID iClass, MIFARE DESFire, or Seos cards can integrate without replacing existing credentials. The addition of NFC/HCE mobile key support gives installers flexibility when specifying access methods for different user groups. The IK08 and IP54 ratings are confirmed specifications, not marketing assumptions, making this appropriate for genuinely exposed outdoor positions. Available through Security Wholesalers, this module is a purpose-built component for the 2N IP Verso ecosystem rather than a generic third-party reader, ensuring firmware compatibility and system integration are maintained.
Buyer Decision Tips
Firmware Compatibility: This module requires firmware version 2.13 or higher on the host 2N IP Verso or LTE Verso intercom. Confirm the installed firmware version before ordering, particularly on older intercom units that have not been updated. Updating firmware on the base unit before installing this module will prevent commissioning delays on site.
Credential Type Verification: Before specifying this module for integration with an existing card system, confirm which card technology is currently deployed on site. While this module supports a wide range of 13.56 MHz cards including MIFARE DESFire, HID iClass, and Seos, it does not support 125 kHz EM or HID Prox legacy cards. Sites still running 125 kHz credentials will need to plan a card migration or choose a different reader module.
Key Features & Technical Specifications
| Brand |
2N (distributed by Axis Communications) |
| SKU / Part Number |
02141-001 |
| Product Type |
RFID Card Reader Module for 2N IP Verso Intercom |
| Generation |
2nd generation (IP Verso 2.0) |
| RFID Frequency |
13.56 MHz |
| Supported Card Types |
ISO14443A, ISO14443B, MIFARE DESFire, PicoPass (HID iClass), FeliCa, ST SR(IX), HID SE (Seos, iClass SE, MIFARE SE), 2N Mobile Key |
| NFC / HCE Support |
Yes – Android 4.3 and higher |
| PACS ID Reading |
Supported |
| IP Rating |
IP54 |
| IK Rating |
IK08 |
| Power Supply |
PoE (Power over Ethernet) |
| Operating Temperature |
-20°C to 50°C |
| Dimensions |
120 x 80 x 30 mm |
| Weight |
200 g |
| Compatible Intercoms |
2N IP Verso, 2N LTE Verso |
| Minimum Firmware Required |
2.13 or higher |
| EAN |
8595159516219 |
Ideal Use Cases
Corporate Office Entrances
PACS ID reading and HID Seos and iClass SE support allow this module to integrate directly with existing corporate access card infrastructure at reception, lobby, and secure floor entrances.
Residential Apartment Complexes
MIFARE DESFire and 2N Mobile Key support suit multi-tenant buildings where residents use physical fobs or smartphone credentials to access the building entry intercom.
Gated Industrial and Warehouse Sites
IP54 and IK08 ratings suit outdoor gate intercom positions at industrial facilities where the reader is exposed to dust, moisture, and physical contact from vehicles and personnel.
Education and Healthcare Facilities
Support for FeliCa and ISO14443 card types alongside NFC mobile credentials provides flexibility for institutions managing diverse user groups with varied existing credential formats.
Mixed Card Environment Upgrades
Where a site has migrated partially to newer card types but retains legacy MIFARE or iClass cards, broad multi-format support allows the module to read all in-use credential types during a transition period.
Choosing the Right Model
- Choose this model if: You are adding RFID card or NFC mobile key access control to an existing 2N IP Verso or LTE Verso intercom running firmware 2.13 or higher, and your credential types include MIFARE DESFire, HID iClass, HID Seos, FeliCa, or NFC-compatible Android devices.
- Choose a different model if: Your site operates legacy 125 kHz EM or HID Prox cards. This module only reads 13.56 MHz credentials and will not detect lower-frequency card types. A reader module with 125 kHz support would be required, or a site-wide card migration should be planned before installation.
- Choose a different model if: You are not using a 2N IP Verso or LTE Verso intercom as the base unit. This is a module specifically designed for the 2N IP Verso platform and is not a standalone reader or compatible with other intercom brands.
FAQs
- What intercom units is this RFID module compatible with?
The 02141-001 module is confirmed compatible with the 2N IP Verso and 2N LTE Verso intercom units. It is not a universal reader and cannot be used as a standalone device or with intercoms from other manufacturers. The host intercom must also be running firmware version 2.13 or higher for the module to function correctly.
- Does this module work with standard MIFARE Classic cards?
The module supports MIFARE DESFire and MIFARE SE, which are secured variants of the MIFARE family. While MIFARE Classic cards operate on 13.56 MHz, they use a different protocol layer. Confirm your specific card type against the supported list before assuming compatibility. For deployment planning, 2N documentation for this module lists the supported card types explicitly.
- Can staff use their Android smartphones instead of a physical card?
Yes. The module supports NFC/HCE credentials via 2N Mobile Key on Android devices running version 4.3 or higher. This allows smartphones to be used as access credentials at the intercom without issuing a physical card or fob. iOS support is not confirmed in the available product data.
- What does IK08 mean for an outdoor installation?
IK08 is an impact resistance rating that corresponds to protection against approximately 5 joules of impact energy. For an outdoor intercom reader at an entrance or gate, this provides meaningful resistance to accidental contact from bags, trolleys, and equipment, as well as a level of protection against deliberate tampering attempts.
- How is the module powered?
The module draws power via PoE (Power over Ethernet) through the same Ethernet connection used for data. No separate 12V or 24V power supply is required at the intercom position. The PoE supply must be provided by the network switch or PoE injector feeding the 2N IP Verso intercom.
- What is the operating temperature range of this module?
The confirmed operating temperature range is -20°C to 50°C. This covers typical Australian outdoor conditions including hot summers and cool winters, and makes the module suitable for exposed outdoor mounting positions in most Australian climate zones.
- Where can I purchase this module in Australia?
The 2N IP Verso 2.0 RFID Card Reader Module (02141-001) is available through Security Wholesalers. When ordering, confirm the firmware version currently running on your installed 2N IP Verso or LTE Verso intercom to ensure the module will commission without requiring a firmware update on site.
Cabling Considerations
- Cable Type: Cat5e or Cat6 Ethernet cable for data and PoE power delivery to the 2N IP Verso intercom base unit.
- Maximum Cable Run: Standard PoE maximum of 100 metres from the PoE switch or injector to the intercom unit applies. Runs beyond this distance will require a PoE extender or intermediate switch.
- PoE Considerations: Ensure the PoE switch or injector supplying the 2N IP Verso provides adequate wattage to power both the intercom base unit and any installed modules simultaneously. Confirm total power draw against the switch port capacity before commissioning.
- Wiring Tips: The RFID reader module connects to the 2N IP Verso via the intercom’s internal module slot, not via a separate external cable run. External cabling planning applies to the intercom base unit only. Use weatherproof conduit for the Ethernet run where it is exposed outdoors at the intercom mounting position.
