Product Overview
Installed at front doors, office entries, and apartment access points, the 2N IP Solo with Camera delivers IP-based visitor management in a compact surface-mount housing with a nickel finish. Featuring a 1280×960 resolution colour CMOS camera with a 2.25mm wide-angle lens and infrared night vision, it captures clear visitor images even in complete darkness without requiring any ambient light. Equipped with full-duplex audio, a 2W Class D speaker, and SIP 2.0 protocol support, it integrates directly with IP telephone systems and can dial up to 3 separate numbers on each call. It also supports the 2N Mobile Video cloud service, enabling calls to reach a mobile phone regardless of location. With an IP54 weather rating, IK08 impact resistance, a built-in tamper switch, and an operating range of -40 degrees C to +60 degrees C, it handles demanding entry-point conditions. PoE 802.3af support simplifies installation by eliminating the need for a separate power supply at the door.
Key Capabilities
Wide-Angle Night Vision Camera
The 2.25mm lens delivers a 120-degree horizontal and 145-degree diagonal field of view at 1280×960 resolution. Infrared backlight ensures the camera captures a usable image of visitors standing at the door even in complete darkness, without any supplementary lighting.
Full-Duplex Two-Way Audio
A built-in microphone and a 2W Class D speaker with adjustable adaptive volume work together in full-duplex mode with acoustic echo cancellation. This allows natural, real-time voice conversation between the visitor at the door and the answering party without call quality degradation.
SIP 2.0 Integration with Multi-Number Dialling
Native SIP 2.0 support means the intercom connects directly to any compatible IP PBX, VoIP telephone system, or softphone. Each call can ring up to 3 separate numbers in sequence or simultaneously, ensuring a visitor can always reach someone even if the first contact is unavailable.
PoE Powered with Passive Relay Output
Single Cat cable installation via PoE 802.3af (Class 0) eliminates the need for a separate power run to the door. A passive NC/NO relay output rated to 30V/1A AC/DC allows direct connection to an electric strike, magnetic lock, or gate controller for door release from within the same cabling run.
IP54 Weather Resistance and IK08 Impact Rating
Certified IP54 protection guards internal components against dust ingress and water splashing from any direction, covering covered outdoor entry locations. The IK08 rating means the unit withstands deliberate impact at the door, and the built-in tamper switch triggers an alert if the unit is forcibly removed from its mounting surface.
Mobile and Cloud Connectivity
The 2N Mobile Video cloud service enables the intercom to call a smartphone directly when a visitor presses the button. ONVIF v2.4 Profile S compatibility allows integration with third-party VMS platforms and NVRs. Visitor snapshots can be automatically emailed at the time of each call for a secondary access record.
Best For
- Office and Commercial Entry Control: SIP 2.0 integration connects the intercom directly to an existing IP PBX or desk phone system, allowing reception or any extension to answer and release the door without additional hardware.
- Residential Front Door Monitoring: The wide-angle 2.25mm lens combined with infrared night vision covers the full width of a standard entry approach and continues to function after dark, making it practical for homes that receive evening deliveries or late visitors.
- Remote or Unmanned Entry Points: The 2N Mobile Video cloud service routes visitor calls to a mobile phone, so a staff member or property owner can respond and release the door from anywhere with a data connection.
- Installations Requiring Extreme Temperature Tolerance: With a confirmed operating range of -40 degrees C to +60 degrees C, this unit suits cold-climate or high-heat environments where standard intercoms may fail or degrade.
Why Choose the 2N IP Solo with Camera
The 2N IP Solo with Camera goes beyond basic door buzzer functionality by combining a 1280×960 night-vision camera, full-duplex SIP audio, and a passive relay output for door release in a single compact surface-mount unit. A basic analog intercom cannot integrate with an IP telephone system or route calls to a mobile phone, while a simple video doorbell lacks the relay output, IK08 vandal resistance, and protocol-level SIP support that professional installations require. The 5-year manufacturer warranty reflects the build quality expected from a 2N product manufactured in the Czech Republic to TAA compliance standards. The confirmed -40 degrees C to +60 degrees C operating range and IP54 certification mean it is a practical choice for Australian climates ranging from coastal humidity to alpine conditions. Available at Security Wholesalers, the 2N IP Solo with Camera suits installers and end users who need a verifiable, standards-based IP intercom solution rather than a consumer-grade substitute.
Buyer Decision Tips
Confirm Your SIP Infrastructure Before Installing: The 2N IP Solo with Camera routes calls via SIP 2.0 to an IP PBX, VoIP extension, or the 2N Mobile Video cloud service. If your site has no existing SIP server or VoIP system, confirm whether you will use the 2N Mobile Video cloud service or set up a hosted SIP account before purchase. Without a valid SIP destination configured, the intercom cannot complete calls.
Surface Mount Requires a Flat Wall or Door Frame Surface: This model is a surface-mount unit and is not designed for recessed or flush-mounted installation into a wall cavity. Confirm your installation surface is flat and that the nickel finish suits your entry aesthetic. If a flush-mount appearance is required, a different housing variant should be evaluated instead.
Key Features & Technical Specifications
| Camera Resolution | 1280 x 960 px (JPEG snapshots) |
| Video Call Resolution | 640 x 480 px |
| Image Sensor | 1/3″ colour CMOS |
| Frame Rate | Up to 30 snapshots per second |
| Lens | 2.25 mm fixed |
| Viewing Angle | 120° horizontal / 90° vertical / 145° diagonal |
| Night Vision | Infrared backlight (active at night) |
| Video Codecs | H.264, H.263, H.263+, MPEG-4, M-JPEG |
| Audio – Microphone | 1 x integrated microphone |
| Audio – Speaker | 2W Class D / 8 ohm; adjustable adaptive volume; 78 dB SPL at 1 kHz at 1 m |
| Full Duplex | Yes, with acoustic echo cancellation (AEC) |
| Audio Codecs | G.711, G.729, G.722, L16/16 kHz |
| Network Interface | 1 x 10/100 Ethernet |
| Power Input | PoE 802.3af Class 0 (12.95W) or 12V DC ±15% / 2A |
| Relay Output | Passive NC/NO contacts, max 30V / 1A AC/DC |
| Supported Protocols | SIP 2.0, ONVIF v2.4 Profile S, DHCP opt. 66, SMTP, 802.1x, RTSP, RTP, TFTP, HTTP, HTTPS, Syslog |
| Weather Rating | IP54 |
| Impact Rating | IK08 |
| Operating Temperature | -40°C to +60°C |
| Finish / Colour | Silver (Nickel); surface mount |
| Tamper Switch | Built-in |
| Compliance | TAA Compliant |
| Country of Origin | Czech Republic |
| Warranty | 5-year manufacturer warranty |
Ideal Use Cases
Office Building Entry
SIP 2.0 support allows the intercom to ring directly to a receptionist’s IP desk phone or any registered extension. The relay output can release an electric strike or magnetic lock at the door without additional control hardware.
Residential Front Door
The infrared night vision camera captures visitor images after dark on 1280×960 resolution, and the 2N Mobile Video cloud service routes the call to a smartphone. Homeowners can see and speak to visitors without being present at the door.
Small Business Shopfront
The 120-degree horizontal field of view captures the width of a standard doorway and immediate approach. After-hours visitor snapshots are automatically emailed at the time of call, providing a visual access log without a separate NVR or camera system.
Cold-Climate or High-Temperature Sites
With a confirmed operating range of -40 degrees C to +60 degrees C, the 2N IP Solo with Camera suits sites in alpine, arid, or industrial thermal environments where other intercoms may fail or exhibit unreliable performance at temperature extremes.
VMS and IP Surveillance Integration
ONVIF v2.4 Profile S compatibility allows the intercom’s video stream to be pulled into a compatible NVR or VMS platform alongside other site cameras. This unifies visitor footage with existing CCTV records without requiring a proprietary management application.
Choosing the Right Model
- Choose this model if: You need a surface-mount IP intercom with an integrated night vision camera, full-duplex SIP audio, and a relay output for door release, particularly where SIP integration with an IP telephone system or mobile phone is a core requirement.
- Choose a different model if: Your installation requires a flush-mount or recessed finish, as this unit is designed for surface mounting only. If the entry point is fully exposed to direct rain without overhead cover, a unit with IP65 or higher weather certification would provide greater long-term protection than the confirmed IP54 rating on this model.
FAQs
- What telephone systems can the 2N IP Solo with Camera connect to?
The intercom uses SIP 2.0 protocol, which is compatible with any standards-based IP PBX, hosted VoIP service, SIP-enabled desk phones, and softphone applications. It can also use the 2N Mobile Video cloud service to route calls to a mobile phone without a local SIP server. Up to 3 separate SIP numbers can be configured to ring on each visitor call. - Does the night vision camera work in complete darkness?
Yes. The built-in infrared backlight activates in low-light and no-light conditions, allowing the 1280×960 camera to capture a usable image of a visitor standing at the door even when there is no ambient lighting at the entry point. - Can I control a door lock or gate directly from this intercom?
Yes. The 2N IP Solo with Camera includes a passive relay output with NC/NO contacts rated to 30V/1A AC/DC. This output can be wired directly to an electric strike, magnetic lock, or gate controller and triggered remotely by the answering party to release the door. - Is a separate power supply required at the installation point?
No, if your network switch or injector supports PoE 802.3af. The intercom draws up to 12.95W over a standard Cat cable run, eliminating the need for a separate 240V power outlet at the door. A 12V DC 2A supply can also be used as an alternative if PoE is not available. - Is the 2N IP Solo with Camera suitable for a fully exposed outdoor location?
It carries a confirmed IP54 rating, which covers dust protection and water splashing from any direction. For locations that are covered or recessed, IP54 is generally sufficient. For fully exposed positions receiving direct rain or high-pressure water, a unit with an IP65 or higher rating would be more appropriate for long-term reliability. - Can visitor call snapshots be saved or emailed automatically?
Yes. The intercom can be configured to email a JPEG snapshot captured at the moment a visitor triggers a call. This provides a secondary visual log of entry attempts that is separate from any connected VMS or NVR recording. SMTP configuration is required on the unit to enable this feature. - Where can I purchase the 2N IP Solo with Camera in Australia and what warranty applies?
The 2N IP Solo with Camera is part of the Security Wholesalers range and carries a 5-year manufacturer warranty. It is TAA Compliant and manufactured in the Czech Republic, making it suitable for projects with government or compliance procurement requirements. Contact Security Wholesalers for pricing and availability.
Cabling Considerations
- Cable Type: Cat5e or Cat6 UTP or FTP for both PoE power delivery and network data. Use FTP (shielded) cable in environments with electrical interference or when running alongside power conduits.
- Maximum PoE Cable Run: 100 metres per the IEEE 802.3af standard. Runs exceeding this distance will require a PoE extender or a midspan injector positioned closer to the intercom, or the use of the 12V DC power input with a separate network cable.
- Door Release Wiring: The passive relay output (NC/NO, max 30V/1A AC/DC) connects directly to the door strike, magnetic lock, or gate controller. Use a cable gauge rated for the lock’s current draw. For 12V or 24V locks exceeding 1A, use a separate power supply and wire the relay as a trigger signal only.
- Tamper Switch: The built-in tamper switch should be wired to your alarm or access control panel if tamper detection is required. Confirm the panel input type (NC or NO) before wiring to match the intercom’s relay configuration.





















