Product Overview
For entry points where clear, loud two-way communication matters more than integrated video, the 2N IP Force 01336-001 delivers a purpose-built IP door station with no camera module, a 10W Class D amplifier, and 2 integrated microphones in a housing rated to IK10 and IP69K. This is the audio-focused variant of the IP Force platform, designed for SIP-based intercom deployments at building entrances, secure gates, industrial access points, and high-traffic commercial entry doors where a separate IP camera already covers the scene. Featuring full-duplex audio with Acoustic Echo Cancellation, visitors are heard clearly even in noisy outdoor environments. Built with a single backlit call button, it also supports control of 2 electric locks directly from the unit. Powered via PoE 802.3af, it integrates into existing SIP phone systems, VMS platforms via ONVIF v2.4, and mobile call forwarding workflows, all backed by a 5-year manufacturer warranty.
Key Capabilities
10W Full-Duplex Audio with AEC
The 10W Class D amplifier and 2 integrated microphones deliver a sound pressure level of 94 dB at 1 metre, with Acoustic Echo Cancellation ensuring clear, natural conversation at busy or noisy entry points without feedback or echo distortion.
IK10 and IP69K Rated Housing
Rated IK10 for resistance to heavy impact and IP69K for protection against high-pressure water jets, this door station withstands deliberate physical attacks, harsh weather, and industrial wash-down environments where standard outdoor intercoms would fail.
Dual Electric Lock Control
The 01336-001 supports control of 2 electric locks directly from the unit, allowing a single door station to manage both a primary entry door and a secondary lock or gate without requiring a separate access control panel for basic configurations.
SIP 2.0 and ONVIF Integration
Full SIP 2.0 (RFC-3261) compliance allows the door station to register with any SIP-compatible PBX, IP phone system, or softphone. ONVIF v2.4 Profile S support enables VMS integration for sites that centralise access events alongside CCTV footage.
PoE Powered, Wide Temperature Range
Powered via PoE 802.3af (Class 0), a single Cat5e or Cat6 cable handles both data and power, simplifying installation at the door frame. The operating temperature range of -40°C to 55°C suits cold-store entries, outdoor industrial sites, and exposed rooftop or carpark stairwell locations.
Best For
- Sites with Existing IP Camera Coverage: Where a dedicated IP camera already monitors the entry point, this no-camera variant avoids paying for a redundant second lens while still delivering the full IP Force audio and lock-control platform.
- High-Vandalism or Wash-Down Environments: The IK10 impact rating and IP69K water ingress rating make this door station appropriate for industrial facilities, food processing entries, loading docks, and external walls prone to deliberate tampering.
- SIP-Based Phone System Deployments: Organisations running an IP PBX or hosted SIP platform can register this unit directly as an extension, routing visitor calls to desk phones, mobile devices, or softphone clients without additional gateway hardware.
- Dual-Lock Access Points: Entry configurations requiring independent control of a foyer door and an inner security door or gate can use the built-in dual lock output without adding a separate access controller for that zone.
Why Choose the 2N IP Force 01336-001
The 01336-001 is the no-camera configuration of the 2N IP Force, which means it is specifically designed for deployments where video at the door is handled by a separate device. Rather than a compromised all-in-one, this variant delivers the full force of the IP Force audio platform: a 10W amplifier producing 94 dB SPL, 2 microphones with full-duplex AEC, and support for G.711, G.729, G.722, and L16/16kHz audio codecs. That audio specification significantly outperforms entry-level intercom handsets in real-world noisy conditions. Combined with IK10 vandal resistance and IP69K weatherproofing, this is a door station built to stay operational where others are replaced repeatedly. The 5-year warranty reflects the build quality expected at this level. Available at Security Wholesalers, the 01336-001 suits integrators specifying a durable, standards-compliant SIP intercom station for commercial and industrial entry points.
Buyer Decision Tips
No-Camera Variant vs. Camera Variant: The 01336-001 ships without an integrated HD camera. If video identification at the entry point is required and no existing IP camera covers the door, the 01337-001 is the 1-button IP Force variant that includes the camera module. Choose the 01336-001 only where a separate camera already covers the entry, or where the site design explicitly separates video surveillance from intercom audio and lock release functions.
Key Features & Technical Specifications
| SKU / Order Number | 01336-001 |
| Product Platform | 2N IP Force |
| Camera Module | None – this variant does not include an integrated camera |
| Call Button | 1 backlit call button |
| Speaker / Amplifier | 10W Class D amplifier |
| Microphones | 2 integrated microphones |
| Audio Mode | Full duplex with Acoustic Echo Cancellation (AEC) |
| Sound Pressure Level | 94 dB ±3% (10W, 1 kHz at 1 m) |
| Audio Codecs | G.711, G.729, G.722, L16/16kHz |
| Signalling Protocol | SIP 2.0 (RFC-3261) |
| Supported Network Protocols | SIP 2.0, DHCP, SMTP, 802.1x, RTSP, RTP, TFTP, HTTP, HTTPS, Syslog, ONVIF |
| VMS Integration | ONVIF v2.4 Profile S |
| Lock Control Outputs | Controls 2 electric locks; additional switch connection option |
| Network Interface | 10/100Base-TX with Auto-MDIX |
| Power Input | PoE 802.3af Class 0 (12.95W); 12VDC ±15%, 2A external supply |
| IP Rating | IP69K |
| IK Rating | IK10 |
| Operating Temperature | -40°C to 55°C |
| Warranty | 5 years |
| EAN | 8595159500263 |
Ideal Use Cases
Industrial Facility Entry Gates
The IK10 vandal rating and IP69K weatherproofing suit exposed perimeter gates and factory entry points where the door station is subject to impact, wash-down cleaning, or harsh environmental exposure. The -40°C operating floor covers cold-climate or refrigerated facility installations.
Commercial Building Foyer Intercom
Where a building already has IP cameras covering the foyer entrance, the 01336-001 provides SIP-based visitor call functionality without duplicating the video layer. The single backlit call button keeps the interface straightforward for general visitor use.
SIP PBX Integration Projects
Organisations with an existing IP PBX can register the IP Force as a SIP extension, routing visitor calls to any internal extension, mobile device, or softphone. DHCP and SMTP support simplify network provisioning and notification workflows.
Carpark Stairwell and Basement Access
The wide operating temperature range and PoE power delivery make this station practical for carpark stairwells, basement entry doors, and covered external locations where long cable runs from an IDF or switch room are the standard installation method.
Dual-Door Access Control Without a Separate Controller
The built-in dual electric lock output allows the door station to manage 2 locking devices simultaneously, making it a compact solution for entry configurations with a main door and secondary inner door or gate where a full access control panel is not warranted.
Choosing the Right Model
- Choose this model if: Your entry point is already covered by a dedicated IP camera, or if your site design separates intercom audio and lock control from CCTV video, and you need a durable SIP-based door station with IK10 and IP69K protection, full-duplex 10W audio, and dual lock outputs.
- Choose a different model if: You need integrated video at the intercom station itself, as the 01337-001 is the IP Force variant with the HD camera module included. If your visitor management workflow requires visual identification at the door unit, the no-camera configuration of the 01336-001 will not meet that requirement.
FAQs
- Does the 01336-001 include a camera?
No. The 01336-001 is specifically the no-camera variant of the 2N IP Force 1-button platform. It ships without an integrated camera module. If you need a camera at the door station, the 01337-001 is the equivalent 1-button configuration that includes the HD camera. The 01336-001 is designed for sites where a separate IP camera already covers the entry scene. - What does IP69K mean and why does it matter for a door station?
IP69K is the highest water ingress protection rating, designed to withstand high-pressure, high-temperature water jets directed from any angle. For a door station mounted at an industrial facility, food production area, or external wall subject to regular wash-down, IP69K ensures the electronics inside remain fully protected. Standard IP66 or IP67 ratings are not sufficient for high-pressure cleaning environments. - Can this door station register as an extension on an existing SIP phone system?
Yes. The IP Force 01336-001 supports SIP 2.0 (RFC-3261), which is the standard protocol used by IP PBX systems, hosted SIP platforms, and most enterprise phone systems. It registers as a SIP endpoint and can route incoming visitor calls to internal extensions, mobile devices, or any SIP-compatible softphone client, without requiring a separate intercom gateway. - How many electric locks can this door station control directly?
The 01336-001 supports control of 2 electric locks directly from the unit, plus an additional switch connection. This allows a single door station to manage both a main entry door and a secondary lock or gate for straightforward dual-door configurations, without the need for a separate access control panel or relay board in that zone. - What power options does the 01336-001 support?
The door station is powered via PoE 802.3af (Class 0, up to 12.95W), which allows a single Cat5e or Cat6 cable to carry both data and power to the door station. For installations where PoE switching is not available, it also accepts 12VDC ±15% at 2A via an external power supply. PoE is the preferred method for new installations as it simplifies cabling and allows central UPS protection. - How does this unit integrate with a VMS or CCTV platform?
The 01336-001 supports ONVIF v2.4 Profile S, which is the standard integration protocol for video management systems. This allows access events, call triggers, and door-release actions from the IP Force to be monitored and logged within a compatible VMS alongside CCTV camera feeds. It also supports RTSP and RTP for audio stream handling in VMS environments. This unit, available through Security Wholesalers, suits integrators who need intercom events to appear in a unified security management interface.
Cabling Considerations
- Cable Type: Cat5e or Cat6 UTP or STP is recommended for PoE delivery and network connectivity. Shielded cable (STP/FTP) is advisable at industrial sites where electrical interference from machinery may be present on cable runs.
- Maximum Cable Run: Standard PoE maximum cable run is 100 metres from the network switch to the door station, in line with IEEE 802.3 cabling limits. Longer runs require a PoE extender or midspan injector.
- PoE Considerations: The 01336-001 operates as a PoE Class 0 device drawing up to 12.95W. Ensure the supplying PoE switch or injector supports 802.3af and has sufficient per-port power budget. If using a managed switch, verify 802.1x authentication is configured correctly if the network requires it, as the IP Force supports 802.1x.
- Lock Wiring: Electric lock outputs require separate low-voltage wiring from the door station to each lock mechanism. Use appropriately rated cable for the lock type and confirm whether the connected lock requires a normally-open or normally-closed configuration before wiring. Run lock wiring through conduit at external entry points to protect against tampering.
- Tamper Switch: The tamper switch connection should be wired back to the access control or alarm panel where tamper detection is required, allowing the system to log or alert if the door station is physically disturbed or removed from its mount.





















