Showing 46–60 of 127 resultsSorted by popularity
The LE-101D is a 1 Ethernet input port and 1 output port power over Ethernet injector that is designed for a small to medium network connection. This product can convert standard 12-24V/DC or 48V/DC power in to DC voltage that runs over existing LAN cable.
NDR-240 is one economical slim 240W DIN rail power supply series, adapt to be installed on TS-35/7.5 or TS-35/15 mounting rails. The body is designed 63mm in width, which allows space saving inside the cabinets. The entire series adopts the full range AC input from 90VAC to 264VAC and conforms to BS EN/EN61000-3-2, the norm the European Union regulates for harmonic current.
The Aetek AET-H21-04130075 is an outdoor unmanaged EXPoE switch, and with its IP67/IK10 rating it is designed to operate in harsh environments between -40 to 60 degrees celsius for outdoor IP surveillance application. This switch is specially designed for IP surveillance applications and aside from the standard 802.3af/at PoE functions, the EX mode can help deliver camera images across extreme distances and maximum power of up to 250m via specific EX ports for long reach PoE IP cameras. The Aetek AET-H21-04130075 also features an extra 20 per cent range of input voltage tolerance, lightning surge protection of AC power and PoE surge protection to prevent the damage that can be caused by outside unstable AC power, lightning surges and power spikes. Altogether, these unique features reduce the costs to replace the damaged fault unit.
The Aetek E69 series is IP67-rated and a hardened PoE Extender. Operating at temperatures from negative 40 degrees to 65 degrees celsius, it’s ideal for harsh outdoor environments. No power adaptor is required, being powered by PoE Injector, middle-span hub, or PoE switch.
AETEK EPo2(Ethernet & Power over 2 wires) kit allows you to connect PoE IP devices such as Intercom/Access Control/Speaker/Touch Screen Station/VoIP/sensor/camera over in-wall 2 wires of doorbell wire, telephone line or 1-pair UTP/STP to Ethernet network. You don’t have to configure anything, and you only need one AETEK EPo2 unit at each end of PoE IP device(PD) & Ethernet Switch port.
In addition to reuse 2-wire cable, AETEK EPo2 is designed to extend PoE range & data rates far beyond 100meters/100 Mbps limits even using 2-wire thinness 26AWG cable.
The E59 series, a small form factor, is an ideal for indoor environments where two units of E59 series can be daisy-chain to prolong range of PoE devices such as PoE cameras, wireless APs reaching up to 300m from end to end or up to 500m by star topology. No power adapter required, E59 PoE extender is powered by PoE injector, middle-span Hub, or PoE switch over one networking cable extending Ethernet range depending on PD’s power consumptions and PSE’s power budget per port.
The Aetek AET-C11-08232120 is an indoor unmanaged EXPoE switch series equipped with DIP switch which provides EX “EXtensive” operation mode. This switch is specially designed for IP surveillance application and besides the standard 802.3af/at PoE functions, the EX mode can deliver extreme distances of camera images and maximum power of up to 250m via specific EX ports for long reach PoE IP cameras. The Aetek AET-C11-08231120 also features an extra 20 per cent range of input voltage tolerance, lightning surge protection of AC power and PoE surge protection to prevent the damage that can be caused by outside unstable AC power, lightning surges and power spikes. Altogether, these unique features reduce the costs to replace the damaged fault unit.
X2 Racks, 18RU Single Section Wall Mounted Cabinet, 600 (W) x 450 (D) x 900 (H) 
Mitsumaru 43 Inch MON−43MDI70FSD Commercial Panel, 700 nt, 
LE-101D 1-port POE Injector 48V/DC at Full 15.4 W Output 
