Product Overview
Control room operators and system integrators managing large Hikvision installations will find the DS-1100KI network keyboard a purpose-built solution for centralised PTZ and device management. Featuring a 7″ TFT LCD touch panel with 800×480 resolution, the DS-1100KI provides hands-on control of PTZ cameras, DVRs, NVRs, video encoders, matrix systems and multi-channel decoders over a single IP-based network connection. Equipped with a precision 3-axis joystick, it delivers smooth pan, tilt and zoom control without the latency associated with software-only interfaces. It also includes RS-232 and RS-485 serial interfaces alongside Gigabit Ethernet, giving installers the flexibility to connect across both legacy and modern infrastructure. Local 1-channel video decoding allows operators to preview live or recorded footage directly on the keyboard screen at up to 1080p, while USB storage support enables on-device capture and recording. Support for up to 15 operators and 256 devices per user makes this keyboard suited to multi-operator security control rooms and larger networked surveillance deployments.
Key Capabilities
7″ TFT Touch Panel
The built-in 800×480 LCD touch screen gives operators direct on-device control without needing a separate monitor. Live view and playback at up to 1080p resolution can be reviewed directly on the keyboard, keeping workstation setups compact and efficient.
3-Axis Joystick PTZ Control
The precision 3-axis joystick provides responsive, proportional control of pan, tilt and zoom functions across connected PTZ cameras. Physical joystick control is noticeably more fluid and accurate than mouse-based PTZ operation in active monitoring environments.
Multi-Device Management
Supports up to 15 individual operators, with each user able to control up to 256 connected devices. This makes the DS-1100KI practical for shared control rooms where multiple staff members require concurrent or scheduled access to different cameras and recorders.
Flexible Connectivity Interfaces
Connectivity includes a Gigabit RJ45 Ethernet port, RS-232, RS-485 serial interfaces and a USB 2.0 port. The combination supports both IP-networked Hikvision devices and legacy serial-controlled equipment such as older matrix systems and analogue PTZ domes.
Local Video Decoding and USB Recording
The 1-channel local video decoding engine lets operators view footage on the keyboard display without routing through a separate workstation. Video can also be captured and saved directly to a USB flash drive, which is useful for clip extraction during incident review.
Best For
- Security Control Rooms: Supports 15 operators each controlling up to 256 devices, making it suited to staffed monitoring environments where multiple operators share PTZ and device access.
- PTZ Camera Operations: The 3-axis joystick provides physical proportional control for pan, tilt and zoom, which is significantly more responsive than software joystick overlays during active surveillance.
- Mixed Legacy and IP Infrastructure: RS-232, RS-485 and Gigabit Ethernet interfaces allow the DS-1100KI to bridge serial-controlled legacy devices with modern IP-based Hikvision NVRs, DVRs and encoders on the same system.
- On-Site Incident Review: The 7″ on-board display supports 1080p live view and playback, and USB clip extraction allows footage to be pulled without requiring access to a separate workstation or NVR interface.
Why Choose the DS-1100KI
The DS-1100KI stands apart from software-only PTZ management by giving operators a dedicated physical interface built specifically for Hikvision system control. The 3-axis joystick delivers proportional PTZ movement that on-screen virtual controls cannot match, which matters in active monitoring situations where speed and precision count. The integrated 7″ touch screen with 1-channel video decoding means operators can preview camera feeds without occupying a separate monitor, reducing workstation complexity in space-constrained control rooms. The combination of RS-232, RS-485 and Gigabit Ethernet interfaces means the DS-1100KI is not restricted to purely IP-based deployments, which is a practical advantage when upgrading hybrid or legacy installations. With support for up to 15 operators and 256 devices per user, it scales well beyond small single-site setups. Available at Security Wholesalers, the DS-1100KI is an export-model unit suited to integrators building professional-grade Hikvision control environments.
Buyer Decision Tips
Buyer Tip: The DS-1100KI connects to your Hikvision devices over IP using the RJ45 Ethernet port, so confirm your NVR, DVR or encoder is on the same network segment or accessible via your router before installation. If you are controlling legacy analogue PTZ cameras or older matrix equipment via RS-485, verify the protocol compatibility with your specific devices beforehand, as RS-485 PTZ control depends on matching baud rate and protocol settings between the keyboard and the connected device.
Key Features & Technical Specifications
| Model |
DS-1100KI (Export) |
| Control Mode |
IP-based |
| LCD Screen |
7″ TFT LCD with touch panel, 800×480 resolution |
| Joystick |
3-axis joystick |
| Live View / Playback Resolution |
Up to 1080p |
| Local Video Decoding |
1-channel for local preview |
| Video Storage |
Capture and recording to USB flash disk |
| Operator Support |
Up to 15 operators; each operator can control up to 256 devices |
| Compatible Devices |
DVR, DVS, matrix systems, network cameras, dome cameras, PC-DVR, multi-channel decoders |
| Network Interface |
1 x RJ45 10M/100M/1000M adaptive Ethernet |
| Serial Interfaces |
1 x RS-232; 1 x RS-485 |
| USB Interface |
1 x USB 2.0 (data storage and firmware upgrade) |
| Audio Input |
1-ch, 3.5mm connector (2.0Vp-p, 1kΩ) |
| Audio Output |
1-ch, 3.5mm connector (Linear, 560Ω) |
| Power Supply |
12VDC |
| Power Consumption |
15W (maximum) |
| Operating Temperature |
-10°C to +55°C |
| Operating Humidity |
10% to 90% |
| Dimensions (H x W x D) |
110mm x 193mm x 435mm |
| Weight |
2kg |
Ideal Use Cases
Staffed Security Control Rooms
Multi-operator environments benefit directly from the DS-1100KI’s support for 15 individual user accounts, each with access to up to 256 devices, allowing shift-based teams to manage large camera networks from a single dedicated controller.
PTZ Camera Tracking and Monitoring
Venues, car parks and perimeter sites using PTZ cameras benefit from the 3-axis joystick’s proportional control, allowing operators to track subjects or scan wide areas with far greater precision than mouse-driven software controls permit.
Hybrid Legacy and IP Surveillance Systems
Sites running both older serial-based equipment and modern Hikvision IP devices can use the DS-1100KI’s RS-232, RS-485 and Gigabit Ethernet interfaces to manage both environments from a single keyboard without replacing existing infrastructure.
Video Matrix and Decoder Control
The DS-1100KI supports switching and control of video output from matrix systems and multi-channel video decoders, making it appropriate for command and display environments where output routing is managed alongside camera PTZ operations.
Choosing the Right Model
- Choose this model if: You are managing a Hikvision NVR, DVR, video encoder or PTZ camera network from a dedicated control station and require physical joystick PTZ control, on-screen video preview, and support for multiple operators across a large device pool.
- Choose a different model if: Your installation involves only a handful of fixed cameras with no PTZ requirements and all monitoring is handled through a standard NVR client interface. In that scenario, a dedicated hardware keyboard controller adds cost and complexity without a practical benefit.
- Choose a different model if: You need outdoor or ruggedised keyboard hardware for field use. The DS-1100KI is designed for indoor desktop operation within the stated -10°C to +55°C temperature range and is not rated for harsh or exposed environments.
FAQs
- Which Hikvision devices is the DS-1100KI compatible with?
The DS-1100KI is compatible with Hikvision NVRs, DVRs, video encoders, network cameras, dome cameras, video matrix systems, multi-channel decoders and PC-DVR software. Control operates over IP using the built-in Gigabit Ethernet port, with RS-232 and RS-485 interfaces available for legacy serial-connected equipment.
- Can multiple operators use the DS-1100KI at the same time?
The DS-1100KI supports up to 15 individual operator accounts, with each user able to control up to 256 devices. While the physical keyboard itself is operated by one person at a time, the multi-user account structure is designed for shared control room environments where different staff members need defined access across large device pools.
- Does the DS-1100KI need to be connected to a separate monitor?
No. The DS-1100KI has a built-in 7″ TFT LCD touch screen at 800×480 resolution that supports 1-channel local video decoding. Live view and playback footage can be reviewed directly on the keyboard display at up to 1080p, so a separate monitor is not required for basic camera monitoring at the control station.
- How does PTZ control work through the DS-1100KI?
PTZ cameras are controlled via the 3-axis joystick, which provides proportional pan, tilt and zoom input. The keyboard connects to PTZ cameras through the IP network via the RJ45 Ethernet port, or through RS-485 for serial-protocol PTZ cameras. The physical joystick offers more precise and responsive control compared to software-based virtual joystick interfaces on a PC or NVR monitor.
- Can footage be recorded or saved from the DS-1100KI itself?
Yes. The DS-1100KI includes a USB 2.0 port that supports video capture and recording to a USB flash drive. This allows operators to extract and save specific footage clips directly from the keyboard without needing to access the NVR or DVR storage interface separately.
- Is the DS-1100KI suitable for use with older analogue or serial-based systems?
Yes. The DS-1100KI includes both RS-232 and RS-485 interfaces in addition to its Gigabit Ethernet port. This allows it to interface with legacy serial-controlled matrix systems and analogue PTZ cameras alongside modern IP-based Hikvision equipment. You will need to verify protocol and baud rate settings match between the keyboard and the connected legacy devices for RS-485 control to function correctly.
Additional Information
