Product SKU: HV-ANE-L7012R
Product Overview
For installations where a low-profile, discreet form factor matters as much as image quality, the Hanwha Vision HV-ANE-L7012R brings a genuinely flat Flateye housing to indoor ceiling and wall mounting scenarios. Unlike a standard dome that protrudes from the surface, the Flateye sits flush and blends into ceilings in lift lobbies, corridors, retail floors, and reception areas without drawing attention. Featuring a 4MP sensor at 2560 x 1440 resolution and a built-in 3mm fixed lens, it captures wide indoor scenes at up to 30fps using efficient H.265 compression. Equipped with a Day and Night ICR filter and 120dB WDR, it handles backlit entrances and mixed lighting environments without washing out detail. It also integrates hallway view mode, WiseStream II bandwidth optimisation, onboard microSD storage up to 128GB, and IP67 plus IK10 ratings, making it a capable choice for indoor spaces that also demand durability.
Key Capabilities
Flateye Discreet Housing
The flat, flush-mount Flateye design sits close to the ceiling surface with minimal protrusion, making it far less conspicuous than a dome or turret in public-facing indoor spaces such as corridors, lift lobbies, and retail ceilings where camera visibility may be undesirable.
4MP Resolution with Wide Coverage
The 2560 x 1440 sensor paired with a 3mm fixed lens delivers a broad field of view suited to wide indoor spaces. At 30fps across all resolutions under H.265 or H.264, footage remains smooth and detailed for review and analytics purposes.
120dB Wide Dynamic Range
The 120dB WDR engine balances bright and shadowed areas within the same frame, ensuring that faces and detail remain visible in backlit scenarios such as entrance doors, reception counters, or areas with large windows behind subjects.
Hallway View Mode
Hallway view rotates the image to a vertical 9:16 aspect ratio, making it practical for corridor and aisle monitoring where the scene is tall and narrow. This avoids wasting resolution on walls and focuses capture on the path of travel.
Built-in Analytics
Onboard detection includes motion, tampering, defocus detection, virtual intrusion and enter/exit zones, and virtual line crossing with directional rules. These can trigger alerts or recordings without requiring a separate analytics server or NVR licence.
Best For
- Corridor and Hallway Monitoring: The hallway view mode and 3mm wide-angle lens make this camera well suited to long, narrow corridors where a standard widescreen frame wastes resolution on side walls.
- Lift Lobbies and Reception Areas: The flat Flateye profile integrates neatly into ceiling surfaces in public-facing spaces where a protruding dome would look out of place.
- Retail Floor Coverage: The 4MP sensor provides enough resolution to monitor wide retail floor areas from a single ceiling mount while the discreet housing avoids deterring customers.
- Bandwidth-Constrained Installations: WiseStream II dynamically adjusts bitrate based on scene complexity, reducing network and storage demands without manually lowering resolution or frame rate.
Why Choose the HV-ANE-L7012R
The HV-ANE-L7012R stands apart from standard dome cameras through its Flateye form factor, which offers a noticeably lower ceiling profile that suits architecturally sensitive or public-facing indoor environments. While a basic dome at the same resolution sits visibly proud of the surface, the Flateye design minimises the visual footprint. The IK10 vandal resistance rating also means it withstands knock or tampering attempts, which is relevant in access corridors, stairwells, and common areas. The combination of 120dB WDR, 0 lux IR capability at 20m, onboard virtual line and zone analytics, and microSD edge recording up to 128GB gives this camera capabilities that go well beyond the entry-level price point. Available through Security Wholesalers as part of the Hanwha Wisenet A Series Essential Value range, the HV-ANE-L7012R delivers a strong feature-to-cost ratio for professional installers and facility managers.
Buyer Decision Tips
Fixed Lens Consideration: The 3mm fixed focal lens provides a wide field of view appropriate for most standard ceiling heights in corridors and open rooms, but it cannot be adjusted after installation. If your scene requires a tighter angle to identify faces at distance, a camera with a varifocal or motorised zoom lens would be a better fit. Confirm your ceiling height and required coverage width before selecting this model.
Key Features & Technical Specifications
| Model |
HV-ANE-L7012R |
| Resolution |
4MP (2560 x 1440) |
| Lens Type |
Fixed 3mm |
| Frame Rate |
30fps at all resolutions |
| Video Compression |
H.265 / H.264 / MJPEG, multiple streaming |
| Day/Night |
Day and Night with ICR (mechanical IR cut filter) |
| Minimum Illumination |
Colour: 0.13 Lux (F1.6, 1/30s) / B/W: 0 Lux (IR LED on) |
| Wide Dynamic Range |
120dB |
| IR Viewable Length |
20m (65.62ft) |
| Onboard Storage |
Micro SD/SDHC/SDXC slot, up to 128GB |
| Power |
PoE (Power over Ethernet) |
| Ingress Protection |
IP67 |
| Vandal Resistance |
IK10 |
| Image Features |
Hallway view, WiseStream II, LDC (Lens Distortion Correction) |
| Analytics |
Motion detection, tampering, defocus detection, virtual area (intrusion/enter/exit), virtual line (crossing/direction) |
| Form Factor |
Flateye (flat-profile ceiling/wall mount) |
Ideal Use Cases
Building Corridors
Hallway view mode rotates the image to a vertical aspect ratio that maximises resolution use along a narrow corridor run, capturing the full length of a passage without wasting frame on walls either side.
Lift Lobbies
The Flateye’s low-profile housing installs flush on lift lobby ceilings without the visual bulk of a dome, while IK10 protection resists contact damage in these high-traffic, sometimes unsupervised spaces.
Retail Floors
The 3mm wide-angle lens and 4MP resolution allow a single ceiling-mounted camera to cover a broad retail floor area, with onboard virtual intrusion zones enabling alerts for after-hours activity.
Reception and Entry Points
The 120dB WDR handles the contrast between bright daylight through entrance doors and darker interior areas, keeping faces and detail visible at the counter or doorway without overexposure.
Stairwells and Access Points
IK10 vandal resistance and IP67 dust and moisture ingress protection make the HV-ANE-L7012R suitable for stairwells and internal access routes where conditions can be harsher and camera tampering is a concern.
Choosing the Right Model
- Choose this model if: You need a discreet, ultra-low-profile camera for indoor ceiling or wall mounting in corridors, lobbies, or retail spaces where a dome’s protrusion would be visually intrusive, and a fixed wide-angle view at 4MP resolution is sufficient for the scene.
- Choose a different model if: Your scene requires a varifocal or motorised zoom lens to frame a specific area after installation, you need to monitor subjects at distances beyond 20m in darkness, or you require audio capture from a built-in microphone.
FAQs
- What makes the Flateye form factor different from a standard dome camera?
A standard dome camera uses a hemispherical housing that protrudes noticeably from a ceiling surface. The Flateye design is significantly flatter, sitting much closer to the mounting surface. This makes it less visible and less obtrusive in public-facing indoor environments such as reception areas, lift lobbies, and retail ceilings where a conventional dome might look out of place or draw unwanted attention.
- Can the HV-ANE-L7012R be installed outdoors?
Yes. Despite being categorised as an indoor camera, the HV-ANE-L7012R carries an IP67 rating for full dust ingress protection and protection against water immersion, along with IK10 impact resistance. This makes it suitable for sheltered outdoor locations such as undercover car parks, building eaves, or covered walkways, provided it is not directly exposed to driving rain or harsh weather.
- What does WiseStream II do and does it affect image quality?
WiseStream II is Hanwha’s dynamic bitrate control technology. It analyses scene complexity in real time and reduces the bitrate during low-activity periods such as an empty corridor, then restores it when motion or detail increases. This can reduce bandwidth and storage consumption by a meaningful margin without reducing the configured resolution or frame rate. Image quality during active scenes is preserved.
- Is the 3mm lens adjustable after installation?
No. The 3mm lens is fixed focal, meaning the angle of view is set at the factory and cannot be adjusted after mounting. Before installation, confirm that the 3mm field of view at your ceiling height covers the intended area. This lens is best suited to standard indoor ceiling heights of approximately 2.5m to 4m where a wide-angle view is appropriate.
- How does hallway view mode work on this camera?
Hallway view rotates the image sensor output to a vertical 9:16 orientation rather than the standard 16:9 widescreen format. When the camera is physically rotated 90 degrees on its mount, the resulting image covers the full height and length of a corridor or aisle more efficiently, using more of the available 4MP sensor area on the scene rather than on side walls that hold no useful information.
- Does the HV-ANE-L7012R support edge recording without a recorder?
Yes. The camera includes a microSD/SDHC/SDXC card slot supporting cards up to 128GB. This allows continuous or event-triggered recording directly to the card without relying on a networked recorder. Edge recording can also serve as a backup in environments where network connectivity is intermittent. The Security Wholesalers product listing includes the full datasheet with details on recording mode configurations supported by this camera.
Additional Information
