Product Overview
For installers who need to position compatible Axis camera brackets or surveillance cabinets on larger poles, the AXIS T91B57 Pole Mount provides a purpose-built mounting base designed for pole diameters between 100mm and 410mm. Supplied under part number 01470-001, this mount is compatible with selected AXIS T91 wall mounts, the AXIS T98A cabinet series, and the AXIS A9188-VE Network I/O Relay Module, making it a practical solution for perimeter surveillance, car parks, industrial sites, campuses, and public infrastructure. Built from powder-coated aluminium with an IK10 impact-resistance rating, it is suited to exposed outdoor environments where vandal resistance and long-term durability matter. The closed-back design with insect-proof cable gasket helps protect cable entry points, while the included stainless steel straps allow secure attachment without sourcing separate fasteners. Maximum load capacity is 30kg.
Key Capabilities
Wide Pole Diameter Range
Adjustable to fit poles from 100mm to 410mm in diameter, covering the larger poles commonly found in car parks, transport infrastructure, outdoor lighting masts, and industrial facility perimeters where smaller pole mounts will not fit securely.
IK10 Impact Resistance
The IK10-rated powder-coated aluminium casing helps the mount withstand physical impact and vandalism. This is particularly relevant for publicly accessible locations such as car parks, school grounds, transport hubs, and open industrial yards where mounting hardware is exposed.
Insect-Proof Cable Gasket
The closed-back design incorporates an insect-proof cable gasket at the cable entry point, reducing the risk of insect infestation inside the mount. This helps maintain installation quality over time in outdoor environments where insects, dust, and debris are present.
30kg Load Capacity
With a maximum load of 30kg, the T91B57 provides a stable base for heavier Axis camera wall mounts, surveillance cabinets, and supported accessories. This makes it suitable for installations requiring more substantial Axis mounting assemblies rather than lightweight single-camera setups.
Stainless Steel Straps Included
Marine-grade stainless steel straps are supplied in the box, allowing the mount to be secured directly to the pole without sourcing additional hardware. The TX30 screw interface provides a professional and consistent fastening point across standard pole-mounting deployments.
Best For
- Large Outdoor Poles: The 100-410mm diameter range suits the larger poles used in car parks, road corridors, infrastructure sites, and outdoor perimeters where compact pole mounts cannot provide a secure fit.
- AXIS T91 Wall Mount Deployments Off Buildings: Where wall mounting is not practical, this mount allows compatible AXIS T91 wall mounts to be relocated to poles, giving installers more flexible camera positioning on open sites.
- AXIS T98A Cabinet Pole Installations: Suitable for mounting the AXIS T98A cabinet series to poles, allowing power accessories, media converters, and network components to be housed near the camera location rather than back at a building.
- Exposed Public and Industrial Sites: The IK10-rated casing and corrosion-resistant stainless steel straps make it a practical choice for schools, transport locations, industrial yards, and public spaces where the mount will be visible and accessible.
Why Choose the AXIS T91B57 Pole Mount
The AXIS T91B57 addresses a specific installation challenge: positioning compatible Axis camera mounts and cabinets on poles rather than walls, particularly on the larger-diameter poles common in car parks, utility sites, and infrastructure environments. Unlike generic pole mount brackets, the T91B57 is engineered specifically for the AXIS T91 wall mount and T98A cabinet ecosystem, so the mounting chain is confirmed to work together. The IK10-rated aluminium casing goes beyond basic weatherproofing by providing impact resistance that generic mounts rarely certify to. The closed-back cable gasket is a practical detail that reduces ongoing maintenance concerns around insect entry, which is often overlooked in exposed outdoor pole installations. Stainless steel straps and an installation guide are included, reducing the time spent sourcing additional components on site. The T91B57 is available at Security Wholesalers as part of the AXIS mounting accessories range.
Buyer Decision Tips
Buyer Tip: The T91B57 is the pole interface only – it does not replace the AXIS T91 wall mount or T98A cabinet. Confirm the full mounting chain before ordering: the pole mount attaches to the pole, then the compatible T91 wall mount or T98A cabinet attaches to the pole mount, and then the camera or cabinet equipment attaches to that. Also confirm your pole diameter falls within 100-410mm. If your pole is narrower than 100mm, a different Axis pole mount will be required.
Key Features & Technical Specifications
| Model |
AXIS T91B57 Pole Mount |
| Part Number |
01470-001 |
| Product Type |
Pole Mount Accessory |
| Pole Diameter Compatibility |
100-410mm / 4-16in |
| Installation Location |
Indoor and outdoor use |
| Compatible Products |
Selected AXIS T91 wall mounts, AXIS T98A cabinet series, AXIS A9188-VE Network I/O Relay Module |
| Maximum Load |
30kg / 66lb |
| Impact Rating |
IK10 |
| Casing Material |
Powder-coated aluminium |
| Colour |
White, NCS S 1002-B |
| Cable Protection |
Closed back with insect-proof cable gasket |
| Cable Routing |
Back cable hole; bottom cable routing requires AXIS T91G61 or AXIS T98A |
| Included Accessories |
Installation guide, insect-proof cable gasket, stainless steel straps |
| Dimensions |
190 x 214 x 67mm |
| Weight |
1.4kg |
| Sustainability |
PVC free |
| Regulatory Approvals |
IEC/EN/UL 60950-1, IEC/EN/UL 60950-22, EN 50581, IEC 62262 IK10 |
| Warranty |
3 years |
Ideal Use Cases
Car Park Surveillance Poles
Car park light poles and dedicated camera poles commonly fall within the 100-410mm diameter range. The T91B57 allows compatible AXIS T91 wall mounts to be pole-mounted for monitoring vehicle lanes, entries, exits, and pedestrian paths across open parking areas.
Perimeter and Fence Line Poles
For boundary monitoring where camera positions need to be on free-standing poles rather than buildings, the T91B57 provides a stable IK10-rated mount that withstands outdoor exposure, pole vibration, and the physical demands of perimeter surveillance environments.
Industrial and Utility Sites
Warehouses, depots, and utility facilities often have large structural poles that require heavy-duty mounting hardware. The T91B57’s 30kg load capacity and IK10 construction support AXIS T91 or T98A installations where standard mounts would not provide sufficient strength or durability.
Campus and Public Space Infrastructure
Schools, universities, transport precincts, and civic spaces frequently use large existing poles for surveillance. The T91B57’s compatibility with the AXIS T91 range allows camera systems to be integrated into existing pole infrastructure without additional structural fabrication.
AXIS T98A Cabinet Pole Installations
Where power supplies, media converters, or network switches need to be housed near the camera location, the T91B57 allows the AXIS T98A cabinet series to be pole-mounted rather than building-mounted, keeping infrastructure consolidated at the camera pole.
Choosing the Right Model
- Choose this model if: Your pole diameter is between 100mm and 410mm and you need to mount a compatible AXIS T91 wall mount, AXIS T98A cabinet, or AXIS A9188-VE Network I/O Relay Module to a pole in an indoor or outdoor environment.
- Choose a different model if: Your pole diameter is smaller than 100mm – the AXIS T91B47 Pole Mount is designed for narrower poles from 50-150mm and would be the appropriate choice for thinner poles or conduit-style mounting points.
- Choose a different model if: You need to mount a camera directly to a pole without a wall mount adapter in between – the T91B57 is a pole interface for existing AXIS T91 and T98A products, not a standalone camera mount.
FAQs
- What pole diameter range does the AXIS T91B57 support?
The T91B57 is designed for poles between 100mm and 410mm in diameter, which is approximately 4 to 16 inches. This covers the larger poles typically found in car parks, outdoor lighting infrastructure, utility sites, and campus surveillance environments. Poles outside this range are not compatible with this mount.
- Does the AXIS T91B57 come with everything needed to mount it to a pole?
Yes. The box includes stainless steel straps, an insect-proof cable gasket, and an installation guide. The stainless steel straps use a TX30 screw interface and allow the mount to be secured directly around the pole. You will still need the compatible AXIS T91 wall mount or T98A cabinet to complete the full mounting assembly.
- Which Axis products attach to the T91B57?
The T91B57 is confirmed compatible with selected AXIS T91 wall mounts, the AXIS T98A cabinet series, and the AXIS A9188-VE Network I/O Relay Module. The specific camera compatibility depends on which AXIS T91 wall mount is used in the assembly. Check the AXIS compatibility documentation for your specific camera model before ordering.
- Is the AXIS T91B57 suitable for outdoor use?
Yes. It is rated for both indoor and outdoor use and is built with an IK10-rated powder-coated aluminium casing, stainless steel straps, and an insect-proof cable gasket. These features make it suited to exposed outdoor pole installations on perimeters, industrial sites, car parks, and transport infrastructure where the mount will face weather, dust, and potential physical contact.
- What does the cable gasket do and why does it matter for outdoor installations?
The insect-proof cable gasket seals the cable entry point on the back of the mount. In outdoor pole-mounted installations, open cable entry points can allow insects, ants in particular, to nest inside the mounting area. This can cause damage to cables and connections over time. The closed-back design with gasket reduces this risk and supports lower long-term maintenance requirements for outdoor systems.
- How much weight can the AXIS T91B57 support?
The maximum load capacity is 30kg. This is sufficient for standard AXIS T91 wall mount and camera combinations as well as AXIS T98A cabinet installations with supported accessories. Confirm the total weight of your mounting assembly, including the wall mount, camera, and any enclosed cabinet equipment, does not exceed this limit. The T91B57 is part of the Security Wholesalers AXIS accessories range for professional installer supply.
Additional Information
{
“@context”: “https://schema.org”,
“@type”: “FAQPage”,
“mainEntity”: [
{
“@type”: “Question”,
“name”: “What pole diameter range does the AXIS T91B57 support?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The T91B57 is designed for poles between 100mm and 410mm in diameter, which is approximately 4 to 16 inches. This covers the larger poles typically found in car parks, outdoor lighting infrastructure, utility sites, and campus surveillance environments. Poles outside this range are not compatible with this mount.”
}
},
{
“@type”: “Question”,
“name”: “Does the AXIS T91B57 come with everything needed to mount it to a pole?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Yes. The box includes stainless steel straps, an insect-proof cable gasket, and an installation guide. The stainless steel straps use a TX30 screw interface and allow the mount to be secured directly around the pole. You will still need the compatible AXIS T91 wall mount or T98A cabinet to complete the full mounting assembly.”
}
},
{
“@type”: “Question”,
“name”: “Which Axis products attach to the T91B57?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The T91B57 is confirmed compatible with selected AXIS T91 wall mounts, the AXIS T98A cabinet series, and the AXIS A9188-VE Network I/O Relay Module. The specific camera compatibility depends on which AXIS T91 wall mount is used in the assembly. Check the AXIS compatibility documentation for your specific camera model before ordering.”
}
},
{
“@type”: “Question”,
“name”: “Is the AXIS T91B57 suitable for outdoor use?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Yes. It is rated for both indoor and outdoor use and is built with an IK10-rated powder-coated aluminium casing, stainless steel straps, and an insect-proof cable gasket. These features make it suited to exposed outdoor pole installations on perimeters, industrial sites, car parks, and transport infrastructure where the mount will face weather, dust, and potential physical contact.”
}
},
{
“@type”: “Question”,
“name”: “What does the cable gasket do and why does it matter for outdoor installations?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The insect-proof cable gasket seals the cable entry point on the back of the mount. In outdoor pole-mounted installations, open cable entry points can allow insects, ants in particular, to nest inside the mounting area. This can cause damage to cables and connections over time. The closed-back design with gasket reduces this risk and supports lower long-term maintenance requirements for outdoor systems.”
}
},
{
“@type”: “Question”,
“name”: “How much weight can the AXIS T91B57 support?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The maximum load capacity is 30kg. This is sufficient for standard AXIS T91 wall mount and camera combinations as well as AXIS T98A cabinet installations with supported accessories. Confirm the total weight of your mounting assembly, including the wall mount, camera, and any enclosed cabinet equipment, does not exceed this limit. The T91B57 is part of the Security Wholesalers AXIS accessories range for professional installer supply.”
}
}
]
}
