Product Overview
Combining 24/7 full-colour night vision with AcuSense deep learning intelligence, the Hikvision DS-2CD2067G2-LU delivers 6MP outdoor surveillance in a compact mini bullet housing suited to eaves, fence lines, driveway entries, and shopfront exteriors. Equipped with a large F1.0 aperture and white light LEDs reaching up to 40 metres, this camera produces vivid colour footage even in zero-light conditions, removing the grey-tone limitations of standard IR cameras. Featuring AcuSense human and vehicle classification, it filters motion events by target type so operators receive meaningful alerts rather than repeated triggers from animals, foliage, or passing rain. Built with a 1/1.8-inch progressive scan CMOS sensor capturing 3200×1800 resolution, it also supports smart events including line crossing, intrusion, and region entrance detection. It integrates onboard microSD storage up to 512GB, IP67-rated weatherproofing, and PoE or 12VDC power flexibility. Available in 2.8mm, 4mm, and 6mm fixed lens options to suit different coverage distances and field-of-view requirements.
Key Capabilities
24/7 Full-Colour Imaging
The F1.0 aperture and white light LEDs rated to 40 metres allow the DS-2CD2067G2-LU to produce vivid colour footage in total darkness. Unlike standard IR cameras that switch to black-and-white at night, this camera retains colour detail continuously, making subject identification significantly more useful in low-light outdoor environments.
AcuSense Human and Vehicle Classification
Deep learning algorithms classify detected motion as human or vehicle targets, allowing motion detection and smart event alerts to be filtered to target types that matter. This significantly reduces notifications triggered by animals, wind-blown vegetation, or environmental movement, making alert management far more practical on busy outdoor perimeters.
6MP 3200×1800 Resolution
The 1/1.8-inch progressive scan CMOS sensor captures detail at up to 3200×1800 pixels, providing substantially more image data than a standard 4MP or 1080p camera. This additional resolution supports clearer identification of individuals, vehicles, or objects within the scene, which is particularly valuable on driveways or entry points where licence plate or facial detail may be needed.
Smart Event Detection
Beyond basic motion, the camera supports line crossing detection, intrusion detection, and region entrance and exit detection – all filterable by human or vehicle target type. Scene change detection and video tampering alarms add further layers of proactive monitoring suited to commercial entry points and perimeter fence lines.
130dB Wide Dynamic Range
With 130dB WDR, the DS-2CD2067G2-LU handles scenes where bright sunlight and deep shadow appear in the same frame, such as a shaded driveway with open sky behind a vehicle. The camera balances exposure across the full scene so neither the bright nor dark areas are washed out or lost.
Local Storage and PoE Flexibility
A built-in microSD slot supports cards up to 512GB, providing local recording as a backup or standalone option independent of a network recorder. PoE (802.3af) support means a single Cat6 cable handles both power and data, simplifying installation on eaves and walls where running separate power cabling would be impractical.
Best For
- Driveway and Entry Point Monitoring: The 2.8mm lens provides a 109-degree horizontal field of view suited to covering the full width of a residential driveway or commercial vehicle entry, while 6MP resolution retains enough detail for vehicle identification across the frame.
- Outdoor Perimeter Coverage at Night: White light LEDs producing colour footage to 40 metres make this camera well suited to fence lines, yard perimeters, and car park entries where standard IR cameras would produce black-and-white footage with limited identification value.
- Commercial Shopfront and Building Exterior: AcuSense human and vehicle target filtering reduces unnecessary alerts in busy areas where passing foot traffic, parked vehicles, and environmental movement would otherwise generate constant notifications.
- Sites Needing Standalone Backup Recording: The microSD slot up to 512GB provides a local fallback if network connectivity or recorder access is interrupted, making this suitable for remote installations or sites where network storage alone is insufficient.
Why Choose the DS-2CD2067G2-LU
The DS-2CD2067G2-LU sits above standard IR mini bullet cameras in a meaningful way. Where a conventional IR camera records in black-and-white after dark, this camera’s F1.0 aperture combined with white light LEDs captures full-colour footage at 0 Lux – retaining clothing colour, vehicle colour, and environmental context that IR footage simply cannot provide. The AcuSense classification layer then filters that footage intelligently, separating human and vehicle events from background noise. At 6MP with a 1/1.8-inch sensor and 130dB WDR, the image quality holds up in challenging mixed-light conditions that would cause overexposure or underexposure on lower-spec cameras. Three lens options – 2.8mm, 4mm, and 6mm – allow the camera to be matched to the actual coverage distance required rather than defaulting to a single compromise focal length. Available through Security Wholesalers, the DS-2CD2067G2-LU is a well-specified outdoor mini bullet for installers and end-users who need consistent colour intelligence around the clock.
Buyer Decision Tips
Buyer Tip – White Light vs. Infrared: The DS-2CD2067G2-LU uses visible white light LEDs rather than infrared. This means the illuminator is noticeable to anyone in the camera’s field of view at night – it emits a warm visible glow, not invisible IR. For sites where covert night monitoring is a priority, an IR camera would be more appropriate. For sites where the visible light also acts as a deterrent or where colour accuracy matters for identification purposes, this is a deliberate advantage. Consider informing end-users of this operational difference before installation.
Buyer Tip – Lens Selection for Coverage Distance: The 2.8mm lens covers a wide 109-degree horizontal field of view, suited to close-range wide coverage such as a driveway mouth or building entry. The 4mm (93 degrees) balances width and reach for mid-range scenarios such as car parks or yard gates. The 6mm (57 degrees) narrows coverage for longer-distance scenes such as approaches or fence lines where detection at greater range matters more than scene width. Confirm the coverage requirement before specifying a lens variant, as the lens is fixed and cannot be changed post-purchase.
Key Features & Technical Specifications
| Image Sensor | 1/1.8″ Progressive Scan CMOS |
| Maximum Resolution | 3200 x 1800 (6MP) |
| Minimum Illumination | Colour: 0.0008 Lux @ F1.0 (AGC ON); 0 Lux with white light |
| Day/Night Mode | 24/7 colour imaging |
| Lens Options | 2.8mm (HFOV 109°), 4mm (HFOV 93°), 6mm (HFOV 57°) – fixed focal, F1.0 aperture |
| Supplement Light | White light LED, up to 40m range, smart supplement light |
| Wide Dynamic Range | 130 dB |
| Video Compression | H.265+/H.265/H.264+/H.264 (main stream); H.265/H.264/MJPEG (sub-stream) |
| Frame Rate | Up to 25fps @ 3200×1800 (50Hz) |
| Smart Events | Line crossing, intrusion detection, region entrance/exit detection (human and vehicle targets), scene change detection |
| Deep Learning | AcuSense human and vehicle classification; face capture |
| Audio | Built-in microphone; mono audio; G.711/G.722.1/G.726/MP2L2/PCM/MP3/AAC-LC |
| On-Board Storage | MicroSD/microSDHC/microSDXC slot, up to 512GB |
| Network Interface | 1 x RJ45 10M/100M self-adaptive Ethernet port |
| Power Supply | 12VDC +/-25%, max 6.0W; PoE 802.3af Class 3, max 7.5W |
| Weather Protection | IP67 (IEC 60529-2013) |
| Housing Material | Metal |
| Dimensions | Ø74.4mm x 179.2mm |
| Operating Temperature | -30°C to 60°C |
| Compatible Clients | iVMS-4200, Hik-Connect, Hik-Central |
Ideal Use Cases
Residential Driveway Entries
The 2.8mm lens option covers a 109-degree horizontal field of view, wide enough to capture the full width of most residential driveways in a single frame. White light LEDs maintain colour footage at night so vehicle colour and licence plates remain visible, which is not achievable with a standard IR camera.
Commercial Car Park Perimeters
AcuSense vehicle detection combined with 40-metre white light coverage makes this camera practical for car park entry lanes and perimeter monitoring. Smart supplement light adjusts output based on scene conditions, reducing overexposure when subjects are close to the camera.
Shopfront and Building Exteriors
Wall or eave mounting on a shopfront benefits from the mini bullet’s compact profile and directional aim. AcuSense human target filtering limits alert fatigue in high foot traffic areas, while 6MP resolution supports after-the-fact identification review.
Industrial Yard Gates and Loading Zones
The 4mm or 6mm lens options extend detection reach for wider yard environments or longer approaches. IP67 weatherproofing and a metal housing handle the dust and moisture exposure typical of industrial and logistics sites, and the -30°C operating range accommodates cold-store or external winter environments.
Remote or Standalone Monitoring Sites
Sites without permanent network recorder access benefit from microSD storage up to 512GB for local recording continuity. ANR (Auto Network Replenishment) support means footage recorded to the card during a network outage is automatically transferred to the NAS or NVR once connectivity is restored.
Choosing the Right Model
- Choose this model if: You need 24/7 colour night vision on an outdoor perimeter, driveway, or building exterior where colour retention after dark matters for identification, and AcuSense human/vehicle classification is required to manage smart event alerts effectively.
- Choose a different model if: The installation requires covert night-time monitoring without any visible illumination – an IR-based camera that operates in the infrared spectrum would be more appropriate in that scenario. Similarly, if the site has existing analogue infrastructure and IP conversion is not planned, a compatible HDTVI or HDCVI bullet camera would be a more practical fit.
- Choose a different model if: The coverage area requires pan, tilt, or zoom functionality to follow moving subjects or monitor a wide area from a single mounting point – a PTZ camera with motorised zoom would better serve that requirement than a fixed-lens mini bullet.
FAQs
- Does the DS-2CD2067G2-LU record in colour at night without any external lighting?
Yes. The camera uses built-in white light LEDs with a range of up to 40 metres combined with an F1.0 aperture lens and a minimum illumination of 0 Lux when the LEDs are active. This allows it to produce full-colour footage in complete darkness without relying on any external lights. The LEDs emit a visible warm glow, so the illumination is not covert. - What is AcuSense and how does it affect alert management on this camera?
AcuSense is Hikvision’s deep learning-based target classification system. On the DS-2CD2067G2-LU, it allows motion detection and smart events such as line crossing and intrusion detection to be filtered so that alerts are triggered only when humans or vehicles are detected, rather than by general motion. This reduces notifications from animals, rain, swaying branches, and other non-target movement that would otherwise generate constant false triggers. - Which lens option is recommended for a standard residential driveway?
The 2.8mm lens provides a 109-degree horizontal field of view, which is wide enough to cover the full width of most residential driveways from an eave or wall mount above the entry point. The 4mm (93 degrees) suits mid-range scenarios where some additional reach is needed. The 6mm (57 degrees) is best suited to longer, narrower approaches rather than wide close-range coverage. - Does this camera support two-way audio?
No. The DS-2CD2067G2-LU has a built-in microphone for audio capture, but there is no confirmed built-in speaker. Two-way audio requires both a microphone and a speaker. As only the microphone is confirmed in the product specification, two-way communication is not supported on this camera. - What is the maximum microSD card size supported and does it support edge recording without an NVR?
The camera supports microSD, microSDHC, and microSDXC cards up to 512GB. It can record directly to the card independently of a network recorder, making it functional as a standalone recording device. It also supports ANR (Auto Network Replenishment), which automatically uploads footage stored on the card to a NAS or NVR once a dropped network connection is restored. - Is the DS-2CD2067G2-LU compatible with Hik-Connect and iVMS-4200?
Yes. The camera is compatible with Hik-Connect for remote mobile access and iVMS-4200 for PC-based management. It also supports Hik-Central for enterprise-level deployments. Up to 6 simultaneous live view channels are supported, and it integrates with standard Hikvision NVRs via ONVIF Profile S, Profile G, and Profile T, as well as Hikvision’s ISAPI and SDK. The DS-2CD2067G2-LU is part of the Security Wholesalers range and is supported by the standard Hikvision compatibility ecosystem. - What weather protection rating does the DS-2CD2067G2-LU carry and is it suitable for all outdoor environments?
The camera carries an IP67 rating to IEC 60529-2013, meaning it is fully protected against dust ingress and can withstand temporary submersion in water up to 1 metre for up to 30 minutes. Combined with an operating temperature range of -30°C to 60°C and a metal housing, it is suited to most Australian outdoor environments including exposed coastal or high-humidity locations. There is no confirmed IK vandal-resistance rating, so it should not be treated as vandal-resistant for high-risk installation positions.
Product Video Samples
Additional Information
























