AXIS TU8006 replaces T8134 PoE Midspan, 802.3at/af, 60W, 55 V DC

AXIS TU8006 60 W Midspan

The AXIS TU8006 60 W Midspan is a single-port PoE midspan designed for powering high-demand Axis network devices over standard Ethernet cabling. It combines power and data onto one network cable, allowing compatible PoE devices to be installed without needing a separate power supply at the camera or device location.

This is especially useful when the existing network switch does not provide enough PoE output for a particular camera, or when upgrading a site without replacing the entire switch. The TU8006 supports IEEE 802.3bt and Axis High PoE devices, making it suitable for many Axis cameras that require higher power for features such as heaters, IR illumination, motors, or advanced camera functions.

Simple Power Upgrade Without Replacing the Switch

The AXIS TU8006 is useful when a site already has a non-PoE switch, standard PoE switch, or insufficient PoE budget. Instead of changing the network switch, the TU8006 can be installed between the switch and the camera to inject power into the Ethernet cable.

This makes it a practical solution for upgrades, replacements, and service work where only one device needs additional PoE power.

Key Features

• Single-port 60 W PoE midspan
• Supports IEEE 802.3bt
• Compatible with Axis High PoE devices
• Injects power and data over one Ethernet cable
• Suitable for high-power Axis network cameras and devices
• Helps avoid replacing existing Ethernet switches
• Supports 100–240 V AC input
• Compact design for professional installations
• High power efficiency
• Axis part number: 03223-001

Common Use Cases

• Powering Axis cameras that require more than standard PoE
• Adding PoE to a non-PoE network switch
• Upgrading one camera position without replacing the whole switch
• Supporting high-power PTZ, multi-sensor, IR, or outdoor cameras where compatible
• Service and retrofit installations where only one device needs additional PoE capacity
• Commercial CCTV systems using Axis network cameras

Important Installation Note

The AXIS TU6011 mains cable is sold separately, so it should be ordered separately if required for the installation.

Technical Specifications

FAQs

What does the AXIS TU8006 60 W Midspan do?

The AXIS TU8006 injects power and data into a single Ethernet cable, allowing a compatible PoE network device to be powered without a separate power cable at the device location.

When would I use this instead of a PoE switch?

Use it when your existing switch does not provide PoE, does not provide enough PoE power, or when only one camera or device needs a higher power supply. It can be easier and cheaper than replacing the entire network switch.

Is the AXIS TU8006 suitable for high-power Axis cameras?

Yes. It supports 60 W output, IEEE 802.3bt and Axis High PoE devices, making it suitable for compatible higher-power Axis network products.

Does it carry both power and data?

Yes. The TU8006 sends both power and network data through one Ethernet cable to the connected PoE device.

Is the mains cable included?

No. Axis notes that the AXIS TU6011 Mains Cable is sold separately.

What is the Axis part number?

The Axis part number is 03223-001.