Product SKU: T94S01P
Product Overview
Built for outdoor installations where concealed conduit cabling is required, the AXIS T94S01P Outdoor Conduit Back Box provides a weatherproof and impact-resistant mounting base for compatible AXIS network cameras. Rated to both IP66 and IP67, it is designed to maintain a sealed installation against dust ingress and water penetration, including temporary submersion conditions. With an IK10+ impact rating, the back box delivers a reinforced mounting point suited to exposed or high-risk environments such as building exteriors, car parks, and industrial perimeters. Featuring conduit cable entry, it allows installers to route cabling through rigid conduit directly into the camera assembly without compromising the ingress protection rating of the overall installation. This makes it well suited to projects where tidy cable management, long-term weatherproofing, and physical robustness are non-negotiable requirements for the installation specification.
Key Capabilities
IP66 and IP67 Weather Rating
Dual ingress protection ratings ensure the back box resists both high-pressure water jets and temporary water immersion, keeping the cable entry point fully sealed in demanding outdoor environments including wet or coastal locations.
IK10+ Impact Protection
The IK10+ rating exceeds the standard IK10 threshold, providing reinforced resistance to physical impact. This is a practical advantage in publicly accessible areas, car parks, and sites where accidental or deliberate contact with the mounting assembly is likely.
Conduit Cable Entry
Supports rigid conduit connection directly into the back box, allowing installers to route cabling through conduit without breaking the sealed installation. This is essential for compliance with conduit-mandatory specifications on commercial and industrial sites.
Outdoor-Rated Construction
Engineered specifically for outdoor surface mounting, the T94S01P is designed to maintain its protective properties across temperature extremes and prolonged UV exposure, supporting long-term deployment on building facades and exposed structures.
Best For
- Conduit-Wired Installations: Purpose-built for sites where cabling must be run through rigid conduit, the T94S01P maintains IP66/IP67 sealing while accommodating conduit entry directly into the camera mount.
- Exposed Outdoor Environments: The IK10+ rating makes this back box appropriate for car parks, building exteriors, and industrial perimeters where the camera assembly may be subject to impact or harsh weather conditions.
- Commercial and Industrial Projects: Installers working on projects with formal cable management specifications or conduit requirements will find this back box meets typical commercial installation standards without improvised workarounds.
Why Choose the AXIS T94S01P
The AXIS T94S01P addresses a specific installation requirement that generic back boxes cannot satisfy: conduit cable entry combined with a dual IP66/IP67 weather seal and an IK10+ impact rating in a single outdoor-rated unit. A standard surface mount or plastic back box will not maintain the ingress protection integrity of the camera assembly when conduit is connected, and will not meet IK10+ impact requirements for exposed locations. The T94S01P is manufactured to AXIS standards, ensuring physical compatibility and sealing performance with supported AXIS network cameras rather than relying on generic fitment. For installers specifying a complete, compliant outdoor camera assembly on commercial or industrial sites, this back box removes the risk of a compromised IP rating at the cable entry point. Available at Security Wholesalers as part of the AXIS accessories range.
Buyer Decision Tips
Buyer Tip: Confirm that your chosen AXIS camera model is listed as compatible with the T94S01P before ordering. The back box is designed for specific AXIS network cameras and the conduit entry point and mounting footprint must align with the camera housing. If your installation does not use rigid conduit, consider whether a standard surface mount back box is more appropriate for your cable management approach.
Key Features & Technical Specifications
| Product Name |
AXIS T94S01P Outdoor Conduit Back Box |
| SKU |
T94S01P |
| Product Type |
Outdoor Conduit Back Box |
| Compatible Devices |
AXIS Network Cameras (see AXIS compatibility list) |
| Ingress Protection |
IP66 and IP67 |
| Impact Rating |
IK10+ |
| Cable Entry Type |
Conduit |
| Mounting Environment |
Outdoor |
| Brand |
AXIS Communications |
| Category |
AXIS Accessories, AXIS Mounts and Brackets |
Ideal Use Cases
Commercial Building Exteriors
Where building codes or client specifications require conduit cabling and a fully sealed camera assembly, the T94S01P provides IP66/IP67 protection at the wall entry point, keeping the installation compliant and weather-resistant.
Car Parks and Parking Structures
The IK10+ impact rating makes this back box appropriate for camera mounting in car parks, where equipment is exposed to vehicle movement, trolleys, and potential contact that a standard back box would not withstand.
Industrial and Warehouse Perimeters
Industrial sites often require conduit-run cabling across large distances. The T94S01P allows rigid conduit to connect directly to the camera mount while maintaining the sealed installation required in dusty or wet industrial environments.
Exposed Coastal or Wet Locations
The combined IP66 and IP67 rating addresses both wind-driven rain and the risk of water pooling or temporary water contact at the cable entry point, making this back box suited to coastal or high-rainfall outdoor deployments.
Choosing the Right Model
- Choose this model if: Your installation uses rigid conduit for cable routing, requires a back box rated to IP66/IP67, and the camera position is in an exposed outdoor location where IK10+ impact resistance is needed.
- Choose a different model if: Your cabling is run through flexible conduit or standard wall cavities without rigid conduit, or if the camera is installed in a sheltered indoor location where a lower IP-rated back box or standard surface mount is sufficient for the application.
FAQs
- What does the T94S01P actually do in a camera installation?
The T94S01P is a back box that mounts to the wall or surface before the camera is fitted. It provides a sealed conduit entry point for the camera cable, maintains the IP66/IP67 weather rating of the overall assembly, and adds IK10+ impact resistance to the mounting base. Without it, connecting rigid conduit to a camera mount would typically compromise the ingress protection seal.
- What is the difference between IP66 and IP67, and why does this back box carry both ratings?
IP66 covers protection against powerful water jets from any direction, while IP67 covers temporary immersion in water up to 1 metre for 30 minutes. Carrying both ratings means the T94S01P is tested against a broader range of water exposure scenarios, which is relevant for outdoor locations that may experience both heavy rain and temporary pooling or flooding at the base of the installation.
- Is IK10+ the same as IK10?
No. IK10 is the highest standard level in the IEC 62262 impact protection scale, rated for impacts of 20 joules. An IK10+ designation indicates the product has been tested to withstand impacts beyond the IK10 threshold, offering a greater degree of physical protection than the standard IK10 rating alone.
- How do I confirm which AXIS cameras are compatible with the T94S01P?
AXIS publishes compatibility documentation for all mounting accessories. Before ordering, check the AXIS product selector or the T94S01P datasheet to confirm your specific camera model is listed as compatible. The back box mounting footprint and conduit entry dimensions must match the camera housing to maintain the IP seal and secure fitment. Security Wholesalers can assist with compatibility queries for AXIS accessories.
- Does the T94S01P support multiple conduit entry points, or only a single conduit connection?
The T94S01P is designed for conduit cable entry as part of a sealed outdoor installation. Refer to the AXIS T94S01P datasheet for the specific conduit entry configuration and dimensions, as the number of entry points and conduit sizing is product-specific and should be verified before installation planning.
Additional Information
No additional downloads available for this product.
