Product SKU: SBV-136BW
Product Overview
Installers fitting the Hanwha Wisenet QNV-6082R or QNV-8080R vandal dome camera to a solid surface or conduit run will find the SBV-136BW back box an essential part of a tidy, professional installation. The SBV-136BW is purpose-built to suit these 2 specific Hanwha Wisenet dome models, providing a secure mounting base that accommodates surface conduit entry and keeps cabling contained and out of view. Featuring a design matched to the footprint of compatible cameras, it ensures the finished installation sits flush and consistent without improvised adapters or workarounds. It is well suited to commercial ceilings, concrete walls, and any surface where recessing the cable into the structure is not practical, allowing installers to complete the run neatly from the conduit directly into the camera housing.
Key Capabilities
Confirmed Camera Compatibility
Designed specifically for the Hanwha Wisenet QNV-6082R and QNV-8080R, the SBV-136BW matches the camera base footprint exactly, removing any guesswork around fit and ensuring a secure, stable mount on the finished installation.
Surface Conduit Support
Where cabling cannot be concealed within a wall or ceiling void, the back box provides a structured entry point for surface conduit runs, keeping the install tidy and compliant without requiring additional cable management accessories.
Clean Finished Appearance
The back box gives the camera a professional, flush-mounted look on solid surfaces such as concrete ceilings and masonry walls, which matters in retail, commercial, and public-facing environments where installation aesthetics are part of the brief.
Genuine Hanwha Wisenet Accessory
As an OEM accessory from Hanwha, the SBV-136BW is designed and tested alongside the cameras it supports, so installers avoid the risk of fitment issues, voided warranties, or structural mismatch that can arise from using generic third-party mounting boxes.
Best For
- Surface Conduit Installations: Provides a neat, structured mounting point where cable runs in surface conduit rather than through the ceiling or wall structure.
- Concrete and Masonry Surfaces: Suited to hard-surface mounting locations such as concrete ceilings, block walls, and soffits where recessing cabling is not viable.
- Commercial and Retail Sites: Delivers a tidy, professional finish on customer-facing installations where exposed wiring or ad hoc mounting solutions are not acceptable.
Why Choose the SBV-136BW
The SBV-136BW is the correct back box for anyone installing the QNV-6082R or QNV-8080R onto a surface that does not allow concealed cable routing. A generic box of similar dimensions may not align with the camera’s mounting hole pattern, potentially leaving gaps, movement, or an unacceptable finish. Because this is a genuine Hanwha Wisenet accessory matched to these 2 specific models, it integrates cleanly without modification. It is the straightforward way to complete a surface-conduit dome camera installation to a professional standard. Available at Security Wholesalers, the SBV-136BW is stocked as part of the broader Hanwha Wisenet mounting and accessory range, making it easy to order alongside the camera itself and keep the project moving without sourcing delays.
Buyer Decision Tips
Buyer Tip: The SBV-136BW is only confirmed for use with the QNV-6082R and QNV-8080R. If you are installing a different Hanwha Wisenet dome model, check the camera’s datasheet or the Hanwha Wisenet accessory compatibility list before ordering, as back boxes are not universally interchangeable across the dome camera range.
Key Features & Technical Specifications
| Model |
SBV-136BW |
| Product Type |
Back box / surface mount junction box |
| Compatible Cameras |
Hanwha Wisenet QNV-6082R, QNV-8080R |
| Mounting Type |
Surface mount |
| Brand |
Hanwha Wisenet |
| Category |
Camera mounting accessory |
Ideal Use Cases
Retail Ceilings
Where surface conduit is used above suspended ceilings or on concrete slab, the SBV-136BW gives the QNV-6082R or QNV-8080R a neat, professional finish that suits customer-facing retail environments.
Commercial Office Buildings
Office corridors and common areas with exposed conduit runs benefit from the structured cable entry point and flush mount the back box provides alongside the compatible dome cameras.
Masonry and Concrete Walls
Hard surface installations where cutting a cable recess is not possible are well served by the SBV-136BW, which accommodates surface conduit entry and anchors the camera to the substrate cleanly.
Stairwells and Lift Lobbies
High-traffic public areas where cabling must be surface run in conduit for compliance or building regulations are a natural fit for this back box paired with the compatible Hanwha Wisenet dome models.
Choosing the Right Model
- Choose this model if: You are installing the QNV-6082R or QNV-8080R onto a concrete, masonry, or solid surface where cabling will be run in surface conduit and you need a clean, manufacturer-matched mounting box.
- Choose a different model if: You are installing a different Hanwha Wisenet dome camera model, as back boxes are camera-specific and this one is only confirmed for the QNV-6082R and QNV-8080R. Check the accessory compatibility list for the correct back box for other dome models.
FAQs
- Which cameras is the SBV-136BW confirmed to work with?
The SBV-136BW is confirmed for use with the Hanwha Wisenet QNV-6082R and QNV-8080R vandal dome cameras. It is not confirmed for any other Hanwha camera models, and using it with an unspecified model may result in fitment issues.
- Why would I need a back box for a dome camera installation?
A back box is required when mounting onto a solid surface such as a concrete ceiling or masonry wall where cabling cannot be routed through the structure. It provides a housing for the cable to exit from surface conduit into the camera base, resulting in a tidy and professional finish rather than exposed wiring.
- Can I install the QNV-6082R or QNV-8080R without the SBV-136BW?
Yes, where cabling can be concealed within the ceiling void or wall, a back box is not required. The SBV-136BW is specifically for surface conduit installations where the cable needs a structured, enclosed entry point at the camera base.
- Does using the SBV-136BW affect the camera’s weatherproofing or IP rating?
The SBV-136BW is a genuine Hanwha Wisenet accessory designed to work with the QNV-6082R and QNV-8080R, so it is engineered to maintain the camera’s installation integrity. For specific IP rating impact in outdoor-adjacent applications, refer to the Hanwha Wisenet installation documentation for the compatible camera models.
- Where can I confirm the SBV-136BW is the correct accessory before ordering?
The Hanwha Wisenet accessory compatibility documentation lists approved mounting accessories for each camera model. The SBV-136BW is part of the Hanwha Wisenet accessories range supplied through Security Wholesalers, and the team can confirm compatibility if you need guidance before placing an order.
Additional Information
No additional downloads available for this product.
