Product SKU: HAN-QRN-430S
Product Overview
For small IP camera installations where simplicity and plug-and-play setup matter, the Hanwha Wisenet QRN-430S delivers a 4-channel PoE NVR built around the Wisenet Q Series platform. Supporting up to 8MP resolution across all 4 channels and a total recording bandwidth of 40Mbps, it handles modern high-resolution IP cameras without requiring a separate PoE switch or complex network configuration. Featuring H.265 compression, the QRN-430S can reduce storage consumption by up to 50 percent compared to H.264, which directly lowers the cost of the hard drive needed to cover a given retention period. P2P remote access is set up via QR code scan using the Wisenet mobile app, removing the need for manual port forwarding on most small deployments. The unit ships without a hard drive but accepts 1 SATA drive up to 6TB, with a single HDMI output for local monitor viewing. It suits homes, small offices, retail shopfronts, and similar 4-camera applications.
Key Capabilities
4-Port PoE Plug and Play
The built-in 4-port PoE switch powers and connects compatible IP cameras over a single Cat5e/Cat6 run per camera. No separate PoE switch or injector is required, making rack space and cabling simpler for small installations in homes and offices.
8MP Resolution Support
All 4 channels support recording up to 8MP, so the QRN-430S keeps pace with current Wisenet Q and compatible IP cameras. Buyers do not need to downgrade camera resolution to match the recorder’s capability on small 4-channel projects.
H.265 Compression
H.265 encoding can cut storage requirements by up to 50 percent compared to H.264, allowing the single SATA drive to hold significantly more recorded footage. For a 4-camera home or retail system, this often means the difference between a 2TB and a 4TB drive for the same retention period.
P2P QR Code Remote Access
The Wisenet mobile app connects to the QRN-430S by scanning a QR code on the unit, establishing a P2P session without requiring the installer or end user to configure router port forwarding. This speeds up commissioning and reduces support calls on small residential and retail deployments.
Dual Stream Recording
Dual track recording allows the NVR to capture a high-resolution main stream for local storage while simultaneously delivering a lower-bandwidth sub-stream for remote viewing over mobile connections, balancing storage use against smooth live viewing on smartphones.
Best For
- Small Residential Systems: The 4-channel PoE setup and QR code P2P access make the QRN-430S a practical choice for homeowners wanting a self-contained IP camera system without complex network configuration.
- Small Retail and Office Installations: Installers fitting out shopfronts, reception areas, or small offices with up to 4 cameras benefit from the plug-and-play PoE ports and H.265 storage savings on a single drive.
- Wisenet Q Series Camera Pairings: Designed to work within the Hanwha Wisenet ecosystem, the QRN-430S integrates cleanly with Wisenet Q Series IP cameras for straightforward channel assignment and remote management through the Wisenet mobile app.
- Cost-Sensitive 4-Camera Projects: H.265 compression reduces the drive capacity needed for a given recording retention period, lowering the total system cost on budget-aware small-scale deployments.
Why Choose the QRN-430S
The QRN-430S separates itself from generic 4-channel NVRs through its native Wisenet platform integration, QR code P2P commissioning, and confirmed 8MP recording support across all channels at up to 40Mbps. A basic recorder at this channel count often tops out at 4MP or 5MP per channel and lacks app-based QR setup, which adds time to every small installation. The H.265 codec support is meaningful in practice: a 4-camera system recording continuously at 8MP over H.265 fits substantially more footage onto a single 4TB or 6TB surveillance drive than an H.264-only unit would. The single SATA bay accepts drives up to 6TB, giving adequate local storage for most small system retention requirements without buying oversized hardware. Available at Security Wholesalers, the QRN-430S ships without a drive so buyers can pair it with the surveillance HDD size that suits their specific retention needs.
Buyer Tip – HDD Selection: The QRN-430S ships with no hard drive installed and accepts 1 SATA drive up to 6TB. Before purchasing, estimate your required retention period: at 8MP across all 4 channels using H.265, a 4TB surveillance-rated drive typically covers 7 to 14 days of continuous recording depending on scene complexity. If your site requires longer retention or continuous 24/7 recording at full resolution, select a 6TB surveillance HDD at the time of purchase to avoid a second installation visit.
Buyer Tip – Channel Limit: The QRN-430S is fixed at 4 channels with no licence-based expansion. If there is any possibility the site will grow beyond 4 cameras within the next two to three years, plan for a higher-channel NVR from the outset rather than replacing the recorder later. The 4-channel model is purpose-built for contained small systems where the camera count is unlikely to change.
Key Features & Technical Specifications
| Model |
Hanwha Wisenet QRN-430S |
| Video Channels |
4 channels |
| Maximum Resolution |
8MP per channel |
| Recording Bandwidth |
Up to 40Mbps |
| Video Compression |
H.265, H.264, MJPEG |
| Recording Mode |
Dual stream (dual track) recording |
| PoE Ports |
4 x built-in PoE ports |
| Storage |
1 x SATA HDD bay, up to 6TB |
| Included HDD |
None (sold separately) |
| Video Output |
1 x HDMI |
| Remote Access |
P2P service via QR code, Wisenet mobile app |
| Series |
Wisenet Q Series |
| Brand |
Hanwha Vision |
Ideal Use Cases
Home Security Systems
The QR code P2P setup and Wisenet mobile app allow homeowners to get a 4-camera IP system running and remotely viewable without network expertise. The 4 built-in PoE ports keep cabling to a single run per camera location.
Small Retail Shopfronts
A 4-channel layout suits most small retail environments covering entry, point of sale, stockroom, and rear access. H.265 compression keeps storage costs manageable on the single SATA drive while maintaining 8MP recording at each position.
Small Office and Reception Areas
Offices requiring coverage of entry, reception, server room, and carpark entrance can be covered within the 4-channel limit. The HDMI output connects directly to a monitor for front-desk live view without additional hardware.
Installer Quick-Commission Deployments
For installers completing high volumes of small residential or light commercial jobs, the plug-and-play PoE ports and QR code remote access reduce on-site commissioning time. The dual stream setup delivers remote viewing quality without additional configuration steps.
Choosing the Right Model
- Choose this model if: Your installation requires exactly 4 IP cameras, you want built-in PoE without a separate switch, and QR code P2P setup via the Wisenet app suits your workflow or your end user’s technical ability.
- Choose a different model if: You anticipate the site growing beyond 4 cameras, need more than 1 HDD bay for extended local retention, or require a higher total recording bandwidth than 40Mbps. A higher-channel NVR from the Wisenet Q range would be more appropriate for those scenarios.
FAQs
- Does the QRN-430S come with a hard drive included?
No. The QRN-430S ships without a hard drive. It accepts 1 SATA surveillance-grade hard drive up to 6TB. You will need to purchase and install a compatible surveillance HDD separately before the unit can record footage locally.
- How do I set up remote viewing on the QRN-430S?
The QRN-430S supports P2P remote access via QR code. Download the Wisenet mobile app on your smartphone, scan the QR code printed on or displayed by the unit, and the app establishes a P2P session. In most small network environments this does not require router port forwarding, making it practical for residential and small business setups.
- Can the QRN-430S record all 4 cameras at 8MP simultaneously?
Yes. The unit supports up to 8MP resolution per channel across all 4 channels, with a total recording bandwidth of 40Mbps. Recording all 4 channels at 8MP is within the stated specification, though actual throughput will depend on the cameras connected and their individual stream bitrate settings.
- What cameras are compatible with the QRN-430S?
The QRN-430S is part of the Hanwha Wisenet Q Series platform and is designed for use with Wisenet-compatible IP cameras. It also accepts ONVIF-compatible third-party IP cameras over the PoE ports, though full feature integration such as auto-discovery and deep settings control is optimised for Hanwha Wisenet cameras.
- How does H.265 compression affect how much I can store on a single drive?
H.265 reduces file size by up to 50 percent compared to H.264 for equivalent image quality. In practical terms, a 4TB drive in a 4-camera system running H.265 at 8MP stores roughly twice the footage duration compared to the same system recording in H.264, which can significantly reduce how often drives need to be cycled or how large a drive you need for a target retention window.
- Where can I purchase a compatible surveillance HDD for the QRN-430S?
Compatible surveillance-rated hard drives in 2TB, 3TB, 4TB, 6TB, and 8TB capacities are available through Security Wholesalers alongside the QRN-430S. The unit accepts drives up to 6TB in its single SATA bay, so there is no benefit to pairing it with an 8TB drive beyond the confirmed 6TB maximum.
Additional Information
Hard Drives
