Product Overview
Built for small to medium IP camera installations, the NVR-108MH-C-8P is an 8-channel PoE network video recorder from HiLook that handles everything from camera power delivery to 4K display output within a compact, lightweight unit. Featuring 8 built-in PoE ports with IEEE 802.3af/at support and up to 75W total PoE budget, it powers and connects up to 8 IP cameras over a single run of Cat cable per camera, removing the need for separate power supplies at each camera location. Equipped with H.265/H.265+/H.264/H.264+ and MPEG4 decoding, it supports recording and live viewing up to 8MP resolution across all 8 channels simultaneously. It also includes simultaneous HDMI and VGA output, with HDMI reaching 4K at 3840 x 2160, making it straightforward to connect both a high-resolution monitor and a secondary display at the same time. It is well suited to home installations, small offices, retail shopfronts, and similar sites where a tidy all-in-one recorder simplifies setup.
Key Capabilities
8 Built-In PoE Ports
All 8 RJ-45 PoE ports support IEEE 802.3af/at with a total PoE budget of up to 75W. This lets installers run Cat cable directly from the NVR to each camera location without separate injectors or switches for sites with up to 8 cameras.
Up to 8MP Recording and Live View
The NVR-108MH-C-8P accepts IP camera inputs up to 8MP resolution and supports live viewing and playback at that resolution across all 8 channels, making it compatible with current 4K and sub-4K HiLook and Hikvision IP cameras.
H.265+ Efficient Compression
Support for H.265 and H.265+ encoding from connected cameras reduces the storage footprint significantly compared to H.264 alone. This directly extends useful recording duration from the single SATA drive without sacrificing image quality.
4K HDMI with Simultaneous VGA Output
The HDMI output supports 4K at 3840 x 2160 while the VGA output operates at up to 1920 x 1080p simultaneously. This allows a high-resolution primary monitor and a legacy or secondary VGA display to run at the same time from a single recorder.
80 Mbps Incoming Bandwidth
With 80 Mbps of incoming bandwidth, the NVR-108MH-C-8P comfortably handles 8 channels of high-resolution recording simultaneously without dropping frames, even when cameras are streaming at higher bitrates under H.264.
Best For
- Small IP Camera Systems: With 8 PoE ports built in, this NVR suits installations of up to 8 IP cameras where a single-unit solution covering power, recording, and display is preferred over a separate switch-and-recorder setup.
- Home and Small Business Installations: The compact 265 x 225 x 48mm footprint and sub-1kg body (without HDD) make it straightforward to mount or locate in a small comms cabinet, office shelf, or utility room.
- Upgrading from Analogue to IP: Sites moving from analogue DVR systems to IP cameras benefit from the NVR-108MH-C-8P’s broad resolution support, from CIF through to 8MP, allowing mixed-generation cameras to operate during a staged upgrade.
- 4K Monitor Connectivity: Installations that include a 4K display at the head-end benefit directly from the HDMI output at 3840 x 2160, which allows 8MP cameras to be viewed at full native resolution on a compatible monitor.
Why Choose the NVR-108MH-C-8P
The NVR-108MH-C-8P removes the most common complexity in small IP system design: the need for a separate PoE switch. With all 8 PoE ports built directly into the recorder and IEEE 802.3af/at support across every port, the entire camera network runs off a single device. The 4K HDMI output is a genuine differentiator at this recorder size, allowing 8MP cameras to be displayed without any downscaling on a compatible monitor. H.265+ decoding from cameras keeps storage demands manageable across the single SATA bay, which accepts drives up to 6TB. At under 1kg without a drive, it installs cleanly in spaces where a full rack-mount unit would be impractical. The NVR-108MH-C-8P is available at Security Wholesalers and is suited to installers and end users who want a straightforward 8-channel PoE solution without over-specifying for a site that does not require advanced AI analytics.
Buyer Decision Tips
Storage Planning: The NVR-108MH-C-8P has a single SATA bay supporting drives up to 6TB. Before purchasing, estimate your required retention period by factoring in the number of cameras, their recording resolution, and whether H.265+ is enabled on each camera. For 8 cameras recording at 4MP with H.265+, a 4TB drive typically delivers 14 to 21 days of continuous recording. If your site requires longer retention without overwriting, a 6TB drive is the maximum this unit supports.
PoE Power Budget: The total PoE output across all 8 ports is capped at 75W. If you are connecting 8 cameras that each draw close to the IEEE 802.3at maximum of approximately 25W per port, the total demand will exceed the NVR’s budget. Check the power draw of your chosen cameras and ensure combined consumption stays within 75W. Most standard HiLook IP cameras draw between 6W and 12W, which keeps an 8-camera system well within the limit.
Key Features & Technical Specifications
| IP Video Inputs | 8 channels, up to 8MP resolution |
| Decoding Format | H.265/H.265+/H.264/H.264+/MPEG4 |
| Recording Resolution | 8MP / 6MP / 5MP / 4MP / 3MP / 1080p / UXGA / 720p / VGA / 4CIF / DCIF / 2CIF / CIF / QCIF |
| Synchronous Playback | 8 channels |
| Decoding Capability | 1-ch at 8MP / 4-ch at 1080p |
| Incoming / Outgoing Bandwidth | 80 Mbps / 80 Mbps |
| HDMI Output | 1-ch, up to 4K (3840 x 2160) at 30Hz; simultaneous HDMI/VGA output |
| VGA Output | 1-ch, up to 1920 x 1080p at 60Hz; simultaneous HDMI/VGA output |
| Audio Output | 1-ch, RCA (Linear, 1 kilohm) |
| Audio Input | 1-ch, RCA (2.0 Vp-p, 1 kilohm) |
| PoE Ports | 8 x RJ-45, IEEE 802.3af/at, up to 75W total PoE power |
| Network Interface | 1 x RJ-45 10/100 Mbps self-adaptive Ethernet |
| Remote Connections | Up to 64 |
| SATA Interfaces | 1 x SATA, up to 6TB per disk |
| USB Interfaces | 2 x USB 2.0 |
| Power Supply | 48 VDC, up to 90W total, up to 10W without PoE (no HDD) |
| Working Temperature | -10°C to 45°C |
| Dimensions (W x D x H) | 265 x 225 x 48 mm |
| Weight (without HDD) | Under 1 kg |
Ideal Use Cases
Residential IP Camera Systems
With 8 PoE ports handling both power and data for each camera, a home installation of up to 8 cameras requires only Cat cable runs from the NVR location to each camera point, keeping the installation clean and the equipment count low.
Small Retail and Shopfronts
The compact 265 x 225 x 48mm footprint fits easily in a back-of-house cabinet or storeroom, while the 4K HDMI output allows a wall-mounted display at the counter to show live footage at full resolution from up to 8MP cameras.
Small Office Environments
Office installations covering entry points, reception areas, and car parks can be managed across all 8 channels with simultaneous playback of every channel at once, supported by the NVR-108MH-C-8P’s 8-channel synchronous playback capability.
Remote Monitoring Setups
With support for up to 64 simultaneous remote connections and network protocols including DDNS and PPPoE, the NVR-108MH-C-8P suits sites where the owner or monitoring party needs access from a remote location via the HiLook Vision app or web browser.
Staged IP System Upgrades
Because the NVR-108MH-C-8P accepts recordings from QCIF through to 8MP, sites transitioning from lower-resolution IP cameras to higher-resolution models can continue using the same recorder throughout the upgrade without interrupting existing channels.
Choosing the Right Model
- Choose this model if: You are building a system of up to 8 IP cameras, want built-in PoE to avoid a separate switch, need 4K HDMI output, and are comfortable with a single internal hard drive bay supporting up to 6TB.
- Choose a different model if: Your site requires more than 8 camera channels, needs two or more internal hard drives for extended local retention, or requires advanced AI analytics features such as smart motion detection or face capture. An NVR with a higher channel count, additional SATA bays, or AI processing capability would be more appropriate in those cases.
FAQs
- Does the NVR-108MH-C-8P come with a hard drive included?
No. The NVR-108MH-C-8P ships without a hard drive. It has a single SATA bay that accepts surveillance-grade drives up to 6TB. You will need to purchase a compatible surveillance HDD separately before the recorder can store footage locally. - Can this NVR power all 8 cameras at once through PoE?
Yes, provided the combined power draw of all connected cameras does not exceed the 75W total PoE budget. Most standard HiLook IP cameras consume between 6W and 12W each, meaning a full 8-camera setup typically falls well within this limit. Check the power specification of each camera model before finalising your design. - What is the maximum recording resolution supported?
The NVR-108MH-C-8P supports recording, live viewing, and playback up to 8MP resolution. This covers current 4K and sub-4K IP cameras in the HiLook and Hikvision range. The HDMI output also supports 4K at 3840 x 2160, allowing 8MP footage to be viewed at full resolution on a compatible display. - Can I connect a monitor and a secondary display at the same time?
Yes. The NVR-108MH-C-8P supports simultaneous HDMI and VGA output. The HDMI output runs at up to 4K while the VGA output supports up to 1920 x 1080p. Both outputs can operate at the same time, which suits installations with a primary 4K monitor and a secondary or legacy VGA screen. - How many cameras can be played back simultaneously?
The NVR-108MH-C-8P supports 8-channel synchronous playback, meaning all 8 camera recordings can be reviewed at the same time. The decoding capability is rated at 1 channel at 8MP or 4 channels at 1080p for decoded output, which applies to the decoded live view grid rather than recorded stream playback. - Where can I get support or documentation for this NVR?
The quick-start guide, datasheet, and full user manual are linked in the Additional Information section of this product page. The NVR-108MH-C-8P is part of the Security Wholesalers range, and the team can assist with pre-purchase compatibility questions, camera pairing recommendations, and hard drive sizing guidance for your specific site.
Product Video Samples
Additional Information
- Want more AI features? Click here for the K Series NVR
- HiLook Quick-Start Guide of Digital and Network Video Recorder
- Datasheet of NVR-100MH-C
- User Manual of HiLook NVR
Hard Drives
| Image | Name | Price | Buy |
|---|---|---|---|
| 4TB HDD - WD Purple / Seagate Surveillance Hard Drive for DVRs & NVRs | $300.00 inc GST +3 Year Warranty & Support | ||
| 6TB HDD - WD Purple / Seagate Skyhawk Surveillance Hard Drive for DVRs & NVR | $420.00 | ||
| 2TB HDD - WD Purple / Seagate Surveillance Hard Drive for DVRs & NVRs | $240.00 inc GST +3 Year Warranty & Support | ||
| 3TB HDD - Surveillance HDD Hard Drive for DVRs & NVRs | $300.00 inc GST +3 Year Warranty & Support | ||
| 8TB HDD - WD Purple / Skyhawk Surveillance Hard Drive for DVRs & NVR | $660.00 inc GST +3 Year Warranty & Support |




























