How does a thermal camera like the DS-2TD2117-3V1 detect intruders differently from a standard IP camera?

Instead of capturing reflected visible light or using IR illumination, the DS-2TD2117-3V1 detects infrared radiation emitted by warm objects including people and vehicles. This means detection occurs in complete darkness, through light fog, or in environments where lighting is absent, without the camera needing to produce any light of its own.

Can this camera identify faces or read number plates?

No. The 160x120 thermal sensor produces heat-signature imagery, not visual detail suitable for face recognition or number plate reading. It is designed to detect the presence and movement of people or vehicles within configured zones, and then trigger alerts. A separate visible-light camera would be needed for identification purposes.

What VCA rules can be configured on the DS-2TD2117-3V1?

The camera supports 4 rule types: line crossing, intrusion, region entrance, and region exiting. Up to 8 individual VCA rules can be active simultaneously, allowing multiple zones and boundaries to be monitored independently within the camera's field of view.

How accurate is the temperature measurement function?

The temperature measurement function covers a range of -20°C to 150°C with an accuracy of ±8°C. This is suitable for detecting significant thermal exceptions such as overheating equipment or developing fire hotspots. It is not intended for precise temperature measurement and must not be used as a medical device. This product is not TGA approved.

Does the DS-2TD2117-3V1 support PoE, and what power options are available?

Yes, the camera supports PoE via the 802.3af standard (Class 4) and can also be powered by 12VDC ±20%. Maximum power consumption is 8W. PoE simplifies installation by delivering power and network connectivity over a single Cat5e or Cat6 cable run to the camera.

Can this camera record locally without a connected NVR?

Yes. The DS-2TD2117-3V1 has a built-in Micro SD card slot supporting Micro SD, SDHC, and SDXC cards up to 256GB. Recording can be set to manual or alarm-triggered mode, providing local footage continuity even if the network connection or NVR is temporarily unavailable.

Where can I obtain this camera, and is it available from stock?

The DS-2TD2117-3V1 is part of the Security Wholesalers range. As noted in the product listing, this model carries a lead time of 4 to 6 weeks and is not held as standard stock. Enquire with Security Wholesalers prior to specifying this camera for time-sensitive projects so procurement timelines can be factored into the installation schedule.

Hikvision DS-2TD2117-3V1 DeepInView Thermal Bullet Camera IP66, 160×120, 25fps 3mm

$1,711.00

FREE DELIVERYWARRANTY GUARANTEED

✔ Dedicated 5★ Customer Care Team ✔ Fast & Responsive Tech Support

Hikvision DS-2TD2117-3V1 | Thermal Bullet Camera | 160×120 | 3mm | IP66

The DS-2TD2117-3V1 delivers a thermal network bullet camera solution designed for perimeter defence and fire prevention across a wide range of infrastructure environments. Equipped with a built-in GPU and deep learning algorithms, it supports high-precision VCA detection including line crossing, intrusion, and region entrance and exit. It also includes a reliable temperature exception alarm function and an advanced fire detection algorithm with pre-alarm capability. This makes it suitable for applications such as communities, villas, construction sites, and industrial facilities.

Key Features

Thermal Imaging Sensor: 160×120 resolution sensor with output image upscaled to 320×240, supporting contrast adjustment and 15 adjustable colour palettes.
Deep Learning VCA: Behaviour analysis based on deep learning supports line crossing, intrusion, and region entrance and exit detection.
Fire Detection: Advanced fire detection algorithm with pre-alarm system for early warning and property protection.
Temperature Exception Alarm: Monitors for temperature anomalies across a range of -20 to 150 degrees Celsius with reliable alarm output.
Image Processing: Adaptive AGC, DDE, 3D DNR, and NETD of less than 40mK for high-quality thermal image clarity.
Wide Operating Range: Rated for working temperatures from -40 to 65 degrees Celsius with IP66 weatherproof protection.

Additional Information

Quick Start Guide
User Manual
Data Sheet
This device is not a medical device and not TGA approved.
CURRENTLY NOT IN STOCK – 4-6 WEEKS LEAD TIME

$1,711.00 inc GST +3 Year Warranty & Support

Description

Product Overview

Thermal imaging at the perimeter demands detection that works regardless of lighting conditions, and the DS-2TD2117-3V1 is built precisely for that purpose. This IP66-rated thermal bullet camera from Hikvision’s DeepInView range uses a Vanadium Oxide uncooled focal plane array sensor with a 160×120 thermal resolution and a 3.1mm lens covering a 50 x 37.2 degree field of view. Equipped with a built-in GPU and deep learning algorithms, it supports VCA behaviour analysis including line crossing, intrusion, region entrance and region exiting, with up to 8 configurable rules. It also integrates dynamic fire point detection for up to 10 simultaneous fire points and a temperature measurement function covering -20°C to 150°C. With TVS 6000V lightning protection and a working temperature range of -40°C to 65°C, this camera is suited to exposed industrial and infrastructure perimeter positions where environmental conditions are unpredictable.

Key Capabilities

Thermal Detection Without Light

The Vanadium Oxide uncooled focal plane array sensor detects heat signatures rather than reflected light, enabling consistent detection in complete darkness, fog, or through light obscurants without any IR illuminator required.

Deep Learning VCA Behaviour Analysis

A built-in GPU runs deep learning algorithms to support 4 VCA rule types: line crossing, intrusion, region entrance, and region exiting. Up to 8 rules can be configured simultaneously, allowing precise perimeter zone monitoring with real-time alarm triggering.

Dynamic Fire Point Detection

The advanced fire detection algorithm can identify up to 10 simultaneous fire points dynamically, making this camera a proactive monitoring tool for outdoor storage areas, industrial yards, and sites where fire risk requires early detection.

Temperature Measurement Rules

Supports 3 rule types with 21 configurable measurement points (10 point, 10 region, 1 line), covering a range of -20°C to 150°C. This enables temperature exception alarms to be configured for equipment monitoring or environmental change detection.

IP66 and TVS 6000V Protection

Rated IP66 for complete dust exclusion and strong water jet resistance. TVS 6000V lightning and surge protection, combined with a -40°C to 65°C working temperature range, makes this camera suited to exposed outdoor installations in harsh climates.

Flexible Recording and Integration

Supports PoE (802.3af) or 12VDC power, a built-in Micro SD slot for up to 256GB local recording, 2-channel alarm inputs and outputs, analog video output, and open API with ISAPI and Hikvision SDK support for integration into existing management platforms.

Best For

Industrial Perimeter Monitoring: The 50 x 37.2 degree field of view and deep learning VCA rules suit fence line and boundary monitoring at factories, warehouses, and infrastructure sites where lighting is absent or inconsistent.
Outdoor Fire Risk Areas: Dynamic detection of up to 10 fire points makes this camera a practical early-warning tool for open storage yards, timber facilities, and industrial compounds with elevated fire risk.
Harsh Climate Installations: The -40°C to 65°C operating range, IP66 rating, and TVS 6000V lightning protection support reliable deployment in exposed locations across extreme temperature environments.
Sites Requiring Equipment Temperature Monitoring: The 21-rule temperature measurement function covering -20°C to 150°C allows temperature exception alarms to be set for machinery, substations, or outdoor equipment that must stay within safe thermal ranges.

Why Choose the DS-2TD2117-3V1

The DS-2TD2117-3V1 is not a general-purpose surveillance camera. It is a dedicated thermal network bullet designed for environments where standard cameras cannot reliably detect threats. The Vanadium Oxide sensor with NETD less than 40mK delivers high thermal sensitivity, and the built-in GPU enables real-time VCA analysis using deep learning rather than basic motion detection. The combination of fire point detection for up to 10 simultaneous hotspots and a configurable temperature measurement function with 21 rules adds operational capability beyond perimeter access control alone. PoE 802.3af support simplifies installation, and the onboard Micro SD slot (up to 256GB) provides local recording continuity. TVS 6000V protection ensures the unit survives direct electrical transients in exposed outdoor positions. Available through Security Wholesalers, the DS-2TD2117-3V1 is a specific-purpose thermal tool for installers and integrators working on industrial, infrastructure, or high-risk site projects.

Buyer Tip: The temperature measurement function on this camera carries an accuracy of plus or minus 8 degrees Celsius, which is suited to detecting significant thermal anomalies such as fire hotspots or overheating equipment, but is not suitable for precise temperature measurement applications. This device is not TGA approved and must not be used as a medical device.

Buyer Tip: The 3.1mm lens provides a wide 50 x 37.2 degree field of view, which is well suited to monitoring broad perimeter sections at relatively close to medium range. If your site requires detecting human presence at longer distances or across a narrower corridor, consider whether a longer focal length thermal lens better matches the detection distance requirement before specifying this model.

Key Features & Technical Specifications

Image Sensor	Vanadium Oxide Uncooled Focal Plane Arrays
Thermal Resolution	160 x 120 (output image resolution 320 x 240)
Pixel Interval	17 µm
Response Waveband	8 µm to 14 µm
NETD	Less than 40mK (@25°C, F#=1.1)
Lens Focal Length	3.1mm
Aperture	F 1.1
Field of View	50° x 37.2° (H x V)
VCA Functions	Line crossing, intrusion, region entrance, region exiting – up to 8 rules
Fire Detection	Dynamic fire point detection, up to 10 fire points
Temperature Range	-20°C to 150°C
Temperature Accuracy	±8°C
Frame Rate	25fps
Video Compression	H.265+/H.265/H.264+/H.264/MJPEG
Local Storage	Built-in Micro SD/SDHC/SDXC slot, up to 256GB
Alarm I/O	2-channel alarm inputs, 2-channel relay outputs
Power	12VDC ±20% or PoE (802.3af, Class 4), max 8W
Protection Level	IP66, TVS 6000V lightning, surge and voltage transient protection
Working Temperature	-40°C to 65°C, humidity 90% or less
Dimensions / Weight	352.4mm x 113.5mm x 113mm / approx. 1.45kg

Ideal Use Cases

Factory and Industrial Perimeter

Deep learning VCA with up to 8 configurable rules allows precise intrusion and line-crossing alerts along factory boundary fences and loading dock perimeters, functioning without any artificial lighting.

Outdoor Storage and Timber Yards

Dynamic fire detection for up to 10 simultaneous hotspots allows early identification of fire events in open material storage environments before they develop into larger incidents.

Utility and Substation Monitoring

The temperature measurement function with 21 configurable rules and a range of -20°C to 150°C supports thermal monitoring of electrical equipment, with exception alarms triggered when readings exceed safe thresholds.

Construction Site Boundaries

The wide 50 x 37.2 degree field of view combined with intrusion and region entry VCA rules covers large unlit site boundaries, and the IP66 and TVS 6000V rating handles exposed outdoor conditions typical of active construction environments.

Community and Villa Perimeter Gates

For residential developments and gated communities, the thermal bullet provides after-dark perimeter detection using heat signatures rather than visible light, integrating with alarm outputs and existing access or VMS platforms via open API and ISAPI support.

Choosing the Right Model

Choose this model if: You need perimeter VCA detection and fire point identification in locations with no reliable lighting, and your site operates across a wide temperature range where standard cameras with IR would be unreliable or impractical.
Choose a different model if: Your application requires identifying individuals or reading number plates, as the 160×120 thermal resolution produces heat signature imagery rather than visual detail. A visible-light IP camera with low-light or IR capability would be required for identification purposes.
Choose a different model if: You need precision temperature measurement within a narrow tolerance, as this camera’s ±8°C accuracy is intended for anomaly detection rather than calibrated measurement. Dedicated thermal measurement instruments are required for precision applications.

FAQs

How does a thermal camera like the DS-2TD2117-3V1 detect intruders differently from a standard IP camera?
Instead of capturing reflected visible light or using IR illumination, the DS-2TD2117-3V1 detects infrared radiation emitted by warm objects including people and vehicles. This means detection occurs in complete darkness, through light fog, or in environments where lighting is absent, without the camera needing to produce any light of its own.
Can this camera identify faces or read number plates?
No. The 160×120 thermal sensor produces heat-signature imagery, not visual detail suitable for face recognition or number plate reading. It is designed to detect the presence and movement of people or vehicles within configured zones, and then trigger alerts. A separate visible-light camera would be needed for identification purposes.
What VCA rules can be configured on the DS-2TD2117-3V1?
The camera supports 4 rule types: line crossing, intrusion, region entrance, and region exiting. Up to 8 individual VCA rules can be active simultaneously, allowing multiple zones and boundaries to be monitored independently within the camera’s field of view.
How accurate is the temperature measurement function?
The temperature measurement function covers a range of -20°C to 150°C with an accuracy of ±8°C. This is suitable for detecting significant thermal exceptions such as overheating equipment or developing fire hotspots. It is not intended for precise temperature measurement and must not be used as a medical device. This product is not TGA approved.
Does the DS-2TD2117-3V1 support PoE, and what power options are available?
Yes, the camera supports PoE via the 802.3af standard (Class 4) and can also be powered by 12VDC ±20%. Maximum power consumption is 8W. PoE simplifies installation by delivering power and network connectivity over a single Cat5e or Cat6 cable run to the camera.
Can this camera record locally without a connected NVR?
Yes. The DS-2TD2117-3V1 has a built-in Micro SD card slot supporting Micro SD, SDHC, and SDXC cards up to 256GB. Recording can be set to manual or alarm-triggered mode, providing local footage continuity even if the network connection or NVR is temporarily unavailable.
Where can I obtain this camera, and is it available from stock?
The DS-2TD2117-3V1 is part of the Security Wholesalers range. As noted in the product listing, this model carries a lead time of 4 to 6 weeks and is not held as standard stock. Enquire with Security Wholesalers prior to specifying this camera for time-sensitive projects so procurement timelines can be factored into the installation schedule.

Additional Information

SKU: DS-2TD21‌17-3V1 Categories: CCTV Surveillance, Hikvision CCTV Security Cameras, Hikvision DeepInView Cameras, Hikvision Thermal Cameras Tag: Hikvision