Product SKU: DHI-NVR608H-32-AI/ANZ
Product Overview
The Dahua DHI-NVR608H-32-AI/ANZ is a 32-channel, 2U WizMind network video recorder designed for large commercial, industrial and multi-site surveillance systems that need high recording bandwidth, intelligent analytics and substantial storage expansion. It accepts cameras up to 32MP and provides up to 1280Mbps incoming and recording bandwidth when recorder-side AI is disabled, or 640Mbps when it is enabled. Eight SATA bays support drives up to 20TB each, with RAID 0, 1, 5, 6 and 10, disk groups and hot swapping for flexible storage design. Built-in AI supports face detection and recognition, video metadata, perimeter protection and SMD Plus, while compatible cameras can add ANPR, people counting, stereo analysis, heat maps and other functions. AcuPick is supported across up to 32 channels, and four HDMI plus two VGA outputs allow detailed multi-screen monitoring. Dual 2.5GbE network ports, N+M clustering, iSCSI and third-party camera access make the recorder suitable for demanding enterprise installations.
Key Capabilities
32-Channel High-Resolution Recording
The recorder accepts up to 32 IP camera channels and supports resolutions through to 32MP. This makes it suitable for larger systems using a mixture of standard surveillance cameras and high-resolution cameras for critical viewing areas.
High Network Throughput
With recorder-side AI disabled, the NVR supports up to 1280Mbps incoming, 1280Mbps recording and 1024Mbps outgoing bandwidth. This capacity is useful for multi-camera projects with higher resolutions, frame rates or bit rates.
Recorder-Side WizMind Analytics
Built-in deep-learning functions include face detection and recognition, video metadata, perimeter protection and SMD Plus. These functions allow selected analytics to run at the recorder rather than relying entirely on camera-side intelligence.
AcuPick Target Search
AcuPick is supported on up to 32 channels when compatible cameras are used. It combines front-end and recorder intelligence to help operators search large amounts of recorded footage and locate selected people or vehicles more efficiently.
Eight-Bay RAID Storage
Eight SATA interfaces support drives up to 20TB each, along with RAID 0, 1, 5, 6 and 10, disk groups and hot swapping. This gives system designers several options for balancing capacity, performance and drive-failure protection.
Flexible Multi-Monitor Output
Four HDMI and two VGA outputs support multi-screen security-room layouts. HDMI3 can output up to 8K in simultaneous mode, while other outputs support resolutions up to 4K or 1080p depending on the selected port and display mode.
Best For
- Large Commercial CCTV Systems: Supports up to 32 IP cameras with high incoming and recording bandwidth for detailed multi-camera surveillance.
- Security Control Rooms: Four HDMI and two VGA outputs support multi-monitor layouts for live monitoring, incident review and operator workstations.
- Warehouses and Industrial Sites: High-resolution recording, intelligent perimeter functions and substantial storage capacity suit larger operational areas.
- Long-Retention Installations: Eight drive bays, drives up to 20TB each and multiple RAID levels provide flexible storage planning.
- Analytics-Focused Projects: Suitable where face recognition, metadata, perimeter protection, SMD Plus or AcuPick will form part of the surveillance workflow.
Why Choose the DHI-NVR608H-32-AI/ANZ
The DHI-NVR608H-32-AI/ANZ is intended for projects where a standard 32-channel recorder does not provide enough bandwidth, storage resilience or analytics capacity. Its strongest advantage is the combination of up to 1280Mbps incoming bandwidth, eight hot-swappable drive bays, multiple RAID levels and recorder-side AI across face, metadata, perimeter and SMD functions. Four HDMI and two VGA outputs also make it better suited to security rooms that need several live displays or high-resolution review. AcuPick can reduce the time required to locate selected targets when compatible cameras are used, while dual 2.5GbE ports support more demanding network designs. Supplied by Security Wholesalers, this recorder is best chosen for professionally planned systems where camera bit rates, AI workloads, storage retention and monitor layouts have been calculated in advance.
Buyer Decision Tips
Buyer Tip: Recorder-side AI changes the available network and decoding capacity. With AI disabled, the NVR supports up to 1280Mbps incoming and 32 × 1080p at 30 fps decoding; with AI enabled, this reduces to 640Mbps incoming and 16 × 1080p at 30 fps. Calculate the intended camera streams and analytics before finalising the design.
Buyer Tip: The datasheet lists eight SATA interfaces but does not specify an included hard drive. Select surveillance-rated drives separately and allow for reduced usable capacity when RAID is configured. The recorder also has no listed built-in PoE camera ports, so compatible external PoE switching is generally required.
Key Features & Technical Specifications
| Model |
DHI-NVR608H-32-AI/ANZ |
| Recorder Type |
32-channel, 2U, eight-bay WizMind network video recorder |
| Camera Access |
32 IP camera channels |
| Supported Resolution |
Up to 32MP, including 24MP, 16MP, 12MP, 8MP, 6MP, 5MP, 4MP, 3MP and lower resolutions |
| Network Bandwidth |
AI disabled: 1280Mbps incoming, 1280Mbps recording and 1024Mbps outgoing; AI enabled: 640Mbps incoming, 640Mbps recording and 512Mbps outgoing |
| Decoding Capability |
Up to 32 × 1080p at 30 fps with recorder AI disabled, or 16 × 1080p at 30 fps with recorder AI enabled |
| AcuPick |
Up to 32 channels with one combined event per channel when compatible camera and recorder intelligence are used |
| AI by Recorder |
Face detection, face recognition, video metadata, perimeter protection and SMD Plus |
| AI Performance |
Up to 8-channel face detection, 8-channel metadata, 32-channel perimeter protection and 32-channel SMD Plus |
| Face Database |
Up to 40 databases with 300,000 face images and 48GB total capacity |
| AI by Camera |
Supports compatible camera-side face analytics, metadata, perimeter protection, SMD Plus, ANPR, stereo analysis, crowd distribution, people counting, vehicle density and object monitoring |
| Storage Interfaces |
8 SATA ports with up to 20TB per disk, plus one eSATA interface |
| Storage Management |
Disk groups, RAID 0/1/5/6/10 and hot-swappable drawer-style drive bays |
| Video Outputs |
4 HDMI and 2 VGA outputs; HDMI3 supports up to 8K in simultaneous output mode |
| Multi-Screen Display |
Main and sub-screen layouts support 1, 4, 8, 9, 16, 25 or 36 camera windows |
| Playback |
Up to 16-channel simultaneous playback with manual, alarm, motion-detection and scheduled recording modes |
| Network Interfaces |
2 × RJ-45 10/100/1000/2500Mbps Ethernet ports with load balancing, fault tolerance and multi-address modes |
| Audio and Alarm |
1-channel RCA audio input, 2-channel RCA audio output, 16 alarm inputs and 8 alarm outputs |
| Additional Interfaces |
4 USB ports, 1 RS-232 interface, 1 RS-485 A/B interface and 1 eSATA port |
| Compression and Compatibility |
Smart H.265+, H.265, Smart H.264+, H.264, MPEG4 and MJPEG; ONVIF Profiles S, T and G, CGI and SDK support |
| Power and Environment |
100–240V AC, 50/60Hz; less than 18W without HDD; operating range of −10°C to +55°C at 10%–93% RH, non-condensing |
| Dimensions and Installation |
444.0 × 456.6 × 95.0mm, 6.40kg without HDD; suitable for rack or desktop installation |
Ideal Use Cases
Warehouses and Distribution Centres
Use the high channel bandwidth and large storage capacity to record loading docks, aisles, entry gates and operational areas.
Corporate and Multi-Tenant Buildings
Supports extensive camera coverage across receptions, common areas, lifts, car parks and building perimeters.
Retail and Shopping Centres
Face analytics, metadata, SMD Plus and compatible people-counting functions can support incident review and operational monitoring.
Industrial Sites
Suitable for recording high-resolution cameras across production areas, vehicle access points, boundaries and restricted zones.
Security Operations Rooms
Four HDMI and two VGA connections support several operator displays for live monitoring, playback and event investigation.
High-Retention CCTV Systems
Eight drive bays and multiple RAID options suit projects that require larger storage pools and drive redundancy.
Choosing the Right Model
- Choose this model if: You need up to 32 camera channels, very high network bandwidth, eight hot-swappable drive bays, RAID support and recorder-side WizMind analytics.
- Choose a smaller recorder if: The system has fewer cameras, shorter storage requirements and does not need multiple monitor outputs or enterprise-level AI capacity.
- Choose another network design if: You require built-in PoE camera ports. This recorder uses standard network interfaces and generally requires compatible external PoE switches for camera power and connectivity.
- Choose a higher-capacity platform if: The completed design exceeds 32 camera access channels or requires more than eight internal SATA drive bays.
FAQs
- How many cameras can the Dahua DHI-NVR608H-32-AI/ANZ record?
The DHI-NVR608H-32-AI/ANZ provides 32 IP camera access channels. It supports recording resolutions from CIF through to 32MP, subject to the connected camera streams, network bandwidth and selected AI workload. With recorder-side AI disabled, the unit supports up to 1280Mbps incoming and recording bandwidth; enabling recorder-side AI reduces both figures to 640Mbps, so system design should account for the intended camera bit rates and analytics.
- Does the DHI-NVR608H-32-AI/ANZ include hard drives, and how much storage can it support?
The datasheet specifies eight SATA interfaces but does not list a hard drive as a standard inclusion. Each bay supports a drive of up to 20TB, providing a maximum specified raw capacity of 160TB when eight supported 20TB drives are installed. Usable capacity is lower with RAID, and Dahua notes that the per-disk limit can vary with environmental temperature, so drives and retention requirements should be planned separately.
- What AI functions run directly on the recorder?
Recorder-side AI includes face detection and recognition, video metadata for people, motor vehicles and non-motor vehicles, perimeter protection and SMD Plus. The recorder supports up to 8 channels of face detection, 8 channels of metadata, 32 channels of perimeter protection and 32 channels of SMD Plus in the listed operating mode. Face recognition supports up to 40 databases containing a combined 300,000 face images.
- What is AcuPick and how many channels does this NVR support?
AcuPick combines compatible camera intelligence with recorder-side processing to help operators search recorded video and locate selected human or vehicle targets more efficiently. The DHI-NVR608H-32-AI/ANZ supports AcuPick on up to 32 channels, with one combined event per channel. The feature depends on compatible cameras, correct event configuration and suitable recorded footage, so the complete camera and recorder combination should be checked before purchase.
- Can the DHI-NVR608H-32-AI/ANZ display video on multiple monitors?
Yes. The recorder provides four HDMI outputs and two VGA outputs, with main and sub-screen layouts supporting up to 36-way display. In simultaneous output mode, HDMI3 can output up to 8K, HDMI1 and HDMI2 up to 4K, and HDMI4 plus both VGA outputs up to 1080p. Maximum resolutions and independent display behaviour vary between simultaneous and heterogeneous modes, so the monitor layout should be planned before commissioning.
- Does this recorder support RAID and hot-swappable drives?
Yes. The DHI-NVR608H-32-AI/ANZ supports RAID 0, 1, 5, 6 and 10, disk groups and hot swapping through its drawer-style chassis. These options are useful for systems where storage performance, redundancy or easier drive servicing matters. RAID does not replace a separate backup strategy, and usable capacity depends on the selected RAID level, number of installed drives and individual drive sizes.
- Does the DHI-NVR608H-32-AI/ANZ have built-in PoE ports?
No built-in PoE camera ports are listed for the DHI-NVR608H-32-AI/ANZ. The recorder has two 10/100/1000/2500Mbps RJ-45 network interfaces, so IP cameras normally require compatible external PoE switches or another suitable power arrangement. This separation can suit larger managed networks, but the PoE switch capacity, uplinks, power budget and network layout must be included in the overall system design.
- What should be checked before choosing this NVR?
Confirm the 32-channel limit, camera resolutions and bit rates, required AI functions, external PoE switching, storage retention target, RAID level, monitor outputs and rack space before ordering. The recorder is a 2U unit measuring 444.0 × 456.6 × 95.0mm and has dual 2.5GbE network ports. Security Wholesalers can help confirm whether the intended cameras, analytics, hard drives and display arrangement suit the required surveillance design.
Additional Information
Dahua DHI-NVR608H-32-AIANZ Datasheet
