Product Overview
For industrial and commercial sites where detecting heat signatures matters more than visible light, the AXIS F2180-TE Thermal Sensor Unit provides wide-angle thermal coverage through a compact modular sensor head that can be positioned up to 30 m from the main unit. With a 95-degree horizontal field of view, this sensor is built to sweep broad areas, making it well suited to perimeter walls, electrical switchrooms, server enclosures, pipeline runs, and industrial equipment zones. Featuring a native 160×120 thermal resolution with output upscaled to 640×480, an athermalized fixed lens across the 8-14 µm spectral range, and NETD sensitivity below 50 mK, it registers temperature deviations reliably even in total darkness and challenging weather conditions. It supports up to 4 configurable measurement zones with spot temperature readings, operates across a measured object range up to 450 degrees Celsius, and carries IP66, IP67, and IP6K9K ratings for demanding outdoor and wash-down environments. The F2180-TE is a sensor head only and requires a compatible AXIS F91 Mk II main unit.
Key Capabilities
95-Degree Thermal Field of View
The wide 95-degree HFoV allows a single sensor head to cover broad zones such as full equipment bays, wide perimeter sections, or open warehouse floors without requiring multiple units, reducing installation complexity on large sites.
Temperature Deviation Detection
With NETD sensitivity below 50 mK, the sensor picks up small thermal differences that would be invisible to a standard optical camera. Up to 4 configurable polygonal measurement zones and spot temperature readings allow precise monitoring of specific equipment, components, or entry points.
Athermalized Fixed Lens
The athermalized lens design maintains consistent focal accuracy as ambient temperatures shift, which is critical in outdoor industrial environments where temperatures vary significantly between seasons, day and night, or across different zones of a facility.
Modular Sensor Placement
The F2180-TE sensor head connects to an AXIS F91 Mk II main unit via cable and can be placed up to 30 m away. Only the compact sensor is externally visible, making it practical for tight spaces, confined conduit runs, and locations where a full camera housing would be impractical to mount.
IP66, IP67, and IP6K9K Rated
Triple-rated for dust ingress, sustained water submersion, and high-pressure washdowns, the F2180-TE is built for environments such as food processing facilities, outdoor industrial yards, and marine perimeters where standard cameras quickly degrade.
Best For
- Industrial Temperature Monitoring: Up to 4 measurement zones and a 450-degree Celsius object temperature ceiling make this sensor suited to monitoring electrical switchgear, transformers, motors, and heat-generating industrial equipment for early fault detection.
- Perimeter Detection in Total Darkness: Thermal imaging requires no illumination, so the F2180-TE detects body heat and thermal signatures across wide outdoor zones without visible light, strobes, or IR emitters that could reveal camera positions.
- Confined or Restricted Mounting Locations: Because the sensor head is compact and separates from the main unit by up to 30 m of cable, it can be routed into ceiling cavities, narrow conduit runs, or structural voids where a conventional camera body cannot physically fit.
- High-Wash Environments: IP6K9K certification makes this unit appropriate for food production lines, abattoirs, and processing facilities where high-pressure hot water cleaning is part of daily operations.
Why Choose the AXIS F2180-TE
The AXIS F2180-TE sets itself apart from conventional IP cameras and standard thermal units through its combination of a wide 95-degree thermal field of view, an athermalized lens that holds focus across variable outdoor temperatures, and an ingress protection rating of IP66, IP67, and IP6K9K. While a basic thermal sensor may offer fixed detection, the F2180-TE supports 4 independent polygonal measurement zones with spot temperature readings, letting operators isolate individual pieces of equipment or entry points within the sensor’s view. Its modular design means the sensing element can be positioned in locations a fixed-body camera could never reach, with only a small sensor head exposed. Combined with a 5-year manufacturer warranty and TAA compliance, it is a specification-grade solution for industrial, critical infrastructure, and commercial security projects. The AXIS F2180-TE is available through Security Wholesalers as part of a broader range of Axis modular camera components.
Buyer Decision Tips
Buyer Tip 1 – Main Unit Compatibility: The F2180-TE is a sensor head only and does not operate independently. It must be connected to a compatible AXIS F91 Mk II main unit, which provides power, network connectivity, and video processing. If you are building a multi-sensor installation, one AXIS F9114-R Mk II main unit supports up to 4 sensor units simultaneously, allowing you to combine thermal and visual sensors on the same main unit for a layered approach.
Buyer Tip 2 – Frame Rate and Resolution Expectations: The F2180-TE captures thermal data at 8.3 fps with a native 160×120 sensor resolution (upscaled to 640×480 output). This is standard for thermal sensors in this class and is entirely sufficient for temperature monitoring and alarm triggering. However, if your application requires smooth motion recording for forensic video evidence, a parallel optical sensor unit on the same main unit is the recommended approach alongside this thermal unit.
Key Features & Technical Specifications
| Model |
AXIS F2180-TE Thermal Sensor Unit |
| Part Number |
03370-001 |
| Sensor Type |
Uncooled thermal microbolometer |
| Native Thermal Resolution |
160 x 120 pixels |
| Output Resolution |
640 x 480 |
| Pixel Size |
12 µm |
| Spectral Range |
8-14 µm |
| Horizontal Field of View |
95 degrees |
| Lens Type |
Athermalized fixed lens, SMA connector interface |
| NETD Sensitivity |
Less than 50 mK |
| Max Frame Rate |
8.3 fps |
| Measurement Zones |
Up to 4 configurable polygonal zones per sensor unit |
| Object Temperature Range |
Up to 450 degrees Celsius |
| Operating Temperature |
-10 degrees Celsius to 60 degrees Celsius |
| Operating Humidity |
10-100% RH (condensing) |
| Ingress Protection |
IP66, IP67, IP6K9K |
| Casing Material |
Aluminium, black (NCS S 9000-N) |
| Power |
Powered via AXIS F91 Mk II main unit (1.6 W) |
| Compatible Main Unit |
AXIS F91 Mk II series (e.g. AXIS F9114-R Mk II supports up to 4 sensors) |
| Max Sensor-to-Main-Unit Distance |
30 m |
| Warranty |
5 years |
| Compliance |
TAA compliant |
Ideal Use Cases
Electrical and Switchroom Monitoring
The F2180-TE’s spot temperature reading and 4-zone measurement configuration allow continuous monitoring of switchboards, junction boxes, and transformers, alerting operators to overheating components before they reach critical failure thresholds.
Outdoor Perimeter Security
With IP67 weather resistance and thermal detection that requires zero illumination, the sensor covers wide outdoor perimeter sections in complete darkness, detecting human heat signatures crossing fence lines or approaching building boundaries without relying on lighting conditions.
Food Processing and Production Facilities
IP6K9K certification means the F2180-TE withstands high-pressure washdown routines common in food manufacturing. The compact sensor head can be mounted in locations that standard housings cannot reach while the main unit is kept in a protected area.
Critical Infrastructure and Data Centres
Server halls, UPS rooms, and network enclosures benefit from the F2180-TE’s temperature deviation alerts. The 95-degree HFoV means a single sensor can cover a full server row while TAA compliance satisfies government and defence procurement requirements.
Industrial Machinery and Pipeline Monitoring
The object temperature range up to 450 degrees Celsius, combined with the sensor’s ability to place polygonal zones directly over specific machinery or pipe sections, makes it practical for early overheating detection on industrial production lines and pipeline infrastructure.
Choosing the Right Model
- Choose this model if: You need wide-angle thermal detection or temperature monitoring in a location where a standard camera cannot be mounted, where lighting is absent or unreliable, or where IP6K9K-rated wash-down resistance is required. The 95-degree HFoV suits broad coverage zones, and the modular design is a strong advantage in confined or architecturally complex installations.
- Choose a different model if: You need standalone thermal detection without a separate main unit, as the F2180-TE cannot operate independently. If your site requires smooth-motion video for forensic evidence purposes rather than heat-based alerting, a standard optical IP camera is more appropriate. If you need a narrower thermal field of view for long-distance detection of a specific point target, a thermal unit with a tighter lens angle would better suit the application.
FAQs
- Can the AXIS F2180-TE operate as a standalone camera without an F91 Mk II main unit?
No. The F2180-TE is a sensor head only. It draws power through the main unit via proprietary cable and relies on the main unit for network connectivity, video processing, and configuration. A compatible AXIS F91 Mk II main unit is required as the base of the system before any sensor head can function.
- How far can the F2180-TE sensor be placed from the main unit?
The sensor cable allows the F2180-TE to be positioned up to 30 m away from the AXIS F91 Mk II main unit. This separation means the main unit can be installed in a protected equipment room or cabinet, with only the compact sensor head exposed in the monitored area, reducing vandalism risk and simplifying weatherproofing of the electronics.
- How many measurement zones can be configured on a single F2180-TE sensor?
Up to 4 independent polygonal measurement zones can be configured per sensor unit. Each zone can trigger temperature deviation alerts independently, and spot temperature readings allow operators to query the exact temperature at a chosen point within the sensor’s field of view on demand.
- What does the 95-degree HFoV mean in practical terms for site coverage?
A 95-degree horizontal field of view is a wide-angle thermal view, covering a broad arc from a single mounting position. At shorter ranges such as a 5 to 8 m ceiling mount in an equipment room, this easily covers an entire row of servers or switchgear. For outdoor perimeter use, the wide angle suits a wall-mounted position overlooking a yard or loading area rather than a narrow-angle long-distance detection scenario.
- Can the F2180-TE detect intruders in complete darkness?
Yes. Thermal sensors detect radiated heat rather than reflected light, so the F2180-TE identifies human and vehicle heat signatures in zero-light conditions without any IR illumination or white light. NETD sensitivity below 50 mK allows detection of subtle temperature differences between a human body and the surrounding environment, including at night and in adverse weather.
- Is the F2180-TE suitable for outdoor use in harsh weather?
Yes. The sensor carries IP66, IP67, and IP6K9K ratings. IP66 and IP67 cover sustained rain and dust ingress, while IP6K9K certifies the unit to withstand high-pressure, high-temperature water jet cleaning. The aluminium casing and an operating temperature range of -10 to 60 degrees Celsius make it appropriate for outdoor industrial environments across Australian conditions. The F2180-TE is available through Security Wholesalers as part of the Axis modular sensor range.
- How many F2180-TE sensor units can be connected to a single main unit?
When paired with an AXIS F9114-R Mk II main unit, up to 4 sensor units can be connected and operated simultaneously. These can be a mix of thermal and optical sensor types, allowing a single main unit installation to monitor multiple zones or combine thermal alerting with visual verification from the same system.
Additional Information
AXIS 03370-001 Datasheet
