Product Overview
For operators integrating Axis PTZ cameras into control environments that rely on VISCA protocol devices, the Axis TV5901 Control Board Adapter provides the physical and signal bridge needed to make that connection work. This compact adapter converts a 6-pin connector to an 8-pin DIN interface, enabling compatible Axis PTZ network cameras to be driven by joysticks, keypads, and other third-party controllers that use the VISCA serial control protocol. It is confirmed compatible with the Axis V5938 and V5925 PTZ network cameras. Weighing just 57 grams and measuring 100 x 140 x 30 mm, the TV5901 is a tidy, purpose-built accessory rather than a universal workaround. Finished in black and backed by a 5-year limited warranty, it suits broadcast studios, house-of-worship production rigs, conference rooms, and any installation where a hardware VISCA controller is the preferred method of PTZ camera operation.
Key Capabilities
VISCA Protocol Conversion
Converts a 6-pin connector to an 8-pin DIN interface so that VISCA-compatible joysticks, keypads, and controllers can send pan, tilt, and zoom commands directly to supported Axis PTZ network cameras without software workarounds.
Confirmed Camera Compatibility
Designed specifically for the Axis V5938 and V5925 PTZ network cameras. Using a purpose-matched adapter removes the guesswork of aftermarket solutions and ensures the control signal is handled cleanly across the pinout conversion.
Compact and Installer-Friendly Form Factor
At 100 x 140 x 30 mm and 57 grams, the TV5901 fits easily behind a rack panel, within a camera housing enclosure cavity, or alongside controller cabling without adding bulk to the installation.
5-Year Limited Warranty
Axis backs the TV5901 with a 5-year limited warranty, which is consistent with their professional camera line. This provides long-term confidence for permanent installations where swapping out a faulty adapter later would be disruptive.
Best For
- Broadcast and Production Environments: Where operators use dedicated VISCA joystick or keypad controllers to drive PTZ cameras during live production, the TV5901 enables hardware-level control of the Axis V5938 or V5925 without relying on software-based PTZ control interfaces.
- House-of-Worship and Conference Room AV Rigs: Installations that use existing VISCA control infrastructure can retain their controllers and simply add the TV5901 to integrate a compatible Axis PTZ camera into the existing control chain.
- System Integrators Specifying Axis PTZ Cameras: When a project calls for the Axis V5938 or V5925 and the control environment uses 8-pin DIN VISCA devices, this adapter is the correct component to complete the connection rather than sourcing a generic alternative.
Why Choose the Axis TV5901 Control Board Adapter
The TV5901 is not a generic serial adapter. It is an Axis-manufactured accessory engineered for the specific pinout requirements of the V5938 and V5925 PTZ network cameras, which means the VISCA control signal is passed correctly without signal degradation or pin mismatch that can occur with off-the-shelf RS-422 or RS-232 adapters. A generic solution may work in testing but can introduce reliability issues in long-term installations where control latency or dropped commands are unacceptable. The TV5901 also carries the full Axis 5-year limited warranty, adding assurance that a cheaper third-party cable converter would not provide. For integrators and AV technicians who have already committed to Axis PTZ cameras and a VISCA control environment, this adapter is the manufacturer-sanctioned path to completing that system cleanly. It is available through Security Wholesalers as part of the broader Axis accessories range.
Buyer Decision Tips
Buyer Tip: The TV5901 is confirmed compatible with the Axis V5938 and V5925 PTZ network cameras only. Before ordering, verify that your installed or specified Axis PTZ camera model is one of these two. If your PTZ camera is a different Axis model, this adapter may not be the correct accessory. Check the Axis product compatibility documentation for your specific camera before purchasing.
Key Features & Technical Specifications
| Product Name |
Axis TV5901 Control Board Adapter |
| Part Number |
02256-001 |
| Product Type |
VISCA Control Adapter (6-pin to 8-pin DIN) |
| Protocol |
VISCA |
| Connector Conversion |
6-pin to 8-pin DIN |
| Compatible Cameras |
Axis V5938, Axis V5925 |
| Colour |
Black |
| Dimensions (L x W x H) |
100 x 140 x 30 mm |
| Weight |
57 g |
| Package Weight |
0.125 lb |
| Box Dimensions (L x W x H) |
6.2 x 4.5 x 1.4 inches |
| GTIN |
7331021075405 |
| Country of Origin |
China |
| Warranty |
5-year limited warranty |
| Brand |
Axis Communications |
Ideal Use Cases
Live Production Studios
Broadcast operators using VISCA joystick controllers can connect the Axis V5938 or V5925 directly to their existing control hardware via the TV5901, enabling smooth pan, tilt, and zoom operation during live recording or streaming.
House-of-Worship Camera Systems
Churches and worship venues that operate VISCA keypad controllers for PTZ camera management can integrate an Axis V5925 or V5938 into their production setup using this adapter without replacing existing control equipment.
Conference and Boardroom AV Installations
In boardrooms where a hardware PTZ controller is preferred over software-based camera management, the TV5901 allows the Axis PTZ camera to be driven directly from the VISCA controller at the operator position.
VISCA Control Chain Integration
Installations with an established VISCA control chain across multiple cameras can add an Axis V5938 or V5925 to the system using the TV5901 adapter, maintaining a consistent hardware control environment across the entire camera fleet.
Choosing the Right Model
- Choose this model if: Your installation uses an Axis V5938 or V5925 PTZ network camera and you need to connect it to a VISCA-compatible joystick, keypad, or hardware controller using an 8-pin DIN interface.
- Choose a different model if: Your Axis PTZ camera is not the V5938 or V5925, as this adapter is not confirmed compatible with other Axis PTZ models. If your control environment uses IP-based PTZ control rather than a hardware VISCA serial connection, this physical adapter is not required.
FAQs
- What does the Axis TV5901 Control Board Adapter actually do?
The TV5901 converts a 6-pin connector to an 8-pin DIN interface, allowing VISCA-compatible controllers such as joysticks and keypads to send pan, tilt, and zoom commands to supported Axis PTZ network cameras. It is a hardware adapter that bridges the pinout difference between the camera’s control board and the VISCA controller.
- Which Axis PTZ cameras is the TV5901 confirmed compatible with?
The TV5901 is confirmed compatible with the Axis V5938 and Axis V5925 PTZ network cameras. Axis has not confirmed compatibility with other PTZ camera models in its range, so it is important to verify your specific camera model before ordering.
- Do I need this adapter if I am already controlling my Axis PTZ camera over IP using VAPIX or ONVIF?
No. The TV5901 is specifically for hardware VISCA serial control via a physical 8-pin DIN connection. If your PTZ camera is already being controlled over a network connection using software or an NVR, this adapter is not required for that control method.
- What type of controllers can connect through the TV5901?
Any joystick, keypad, or hardware PTZ controller that uses the VISCA protocol and an 8-pin DIN output can connect to the compatible Axis PTZ camera via this adapter. The specific VISCA controller compatibility should be verified against your controller’s documentation.
- What warranty does the TV5901 carry?
Axis backs the TV5901 with a 5-year limited warranty, consistent with the warranty coverage offered on their PTZ camera line. This is confirmed in the product data. The TV5901 is available through Security Wholesalers as part of the Axis accessories range.
