Product Overview
For AV integrators and broadcast professionals who need a camera that bridges professional surveillance and live production, the AXIS V5925 PTZ Network Dome Camera delivers a compelling combination of 30x optical zoom, full HD 1080p at up to 60 fps, and broadcast-grade audio integration in a ceiling-mounted indoor dome form factor. Featuring XLR balanced inputs with 48 V phantom power alongside 3G-SDI and HDMI video outputs, this camera is designed for environments such as lecture theatres, houses of worship, conference centres, and production studios where both network streaming and direct AV output are required. Equipped with AXIS PTZ Autotracking, the V5925 follows a subject automatically across its 340-degree pan range without manual operator input. It also integrates Axis Zipstream compression with H.264 and H.265 to reduce bandwidth and storage demands. NDI compliance is supported with a separately purchased licence, extending compatibility with NDI-based production workflows.
Key Capabilities
30x Optical Zoom with Autofocus
The 4.4-132 mm varifocal lens with F1.4-4.6 aperture and autofocus delivers a horizontal field of view from 62 degrees down to 2.3 degrees, allowing the V5925 to frame a presenter at the front of a lecture hall or zoom into fine detail across a large indoor space without loss of sharpness.
AXIS PTZ Autotracking
Built-in PTZ Autotracking lets the camera follow a moving subject automatically, reducing the need for a dedicated camera operator in lecture capture, house-of-worship streaming, or corporate presentation environments. This is included with the camera and does not require a separate licence.
Broadcast-Grade Audio Integration
Dual balanced XLR inputs with 48 V phantom power support studio-quality condenser microphones directly at the camera. Combined with a 3.5 mm input and output, the V5925 handles stereo audio capture at a level that generic IP cameras cannot match, making it suited to production-quality audio pipelines.
3G-SDI and HDMI Outputs
Direct 3G-SDI and HDMI video outputs allow the V5925 to feed a production switcher, display, or recording device alongside its network stream. This dual-path output is essential in AV environments where both IP streaming and local broadcast routing are required from a single camera position.
VISCA Control and NDI Compatibility
VISCA joystick and VISCA over IP support integrates the V5925 into existing camera control systems used in broadcast and AV production. NDI compliance is available with a separately purchased licence, enabling discovery and streaming within NDI-based production workflows such as those used in live-switched productions.
Zipstream Compression and ACAP Platform
Axis Zipstream with H.264 and H.265 significantly reduces network bandwidth and storage requirements compared to standard compression. The ARTPEC-7 processor and AXIS Camera Application Platform allow third-party analytics applications to run directly on the camera, extending its capabilities beyond out-of-the-box defaults.
Best For
- Lecture Theatres and Learning Spaces: PTZ Autotracking follows a presenter across a large room while 30x optical zoom captures detail from the rear of the hall, reducing the need for manual camera control during recording or live streaming.
- Houses of Worship: Ceiling-mounted dome form factor blends into architectural ceilings while PTZ Autotracking and 256 preset positions allow smooth, automated coverage of a stage or altar from a single camera position.
- Conference and Boardroom AV Systems: 3G-SDI and HDMI outputs feed directly into AV switchers, while VISCA control integrates with room control systems for seamless camera management during video conferencing and presentations.
- Live Production and Broadcast Studios: XLR balanced inputs with 48 V phantom power and dual video outputs make the V5925 a network camera that participates in professional production environments, not just surveillance-grade monitoring.
- NDI Production Workflows: With a separately purchased NDI licence, the camera becomes discoverable on an NDI network, integrating with software-based production switchers and tools that rely on NDI-based camera routing.
Why Choose the AXIS V5925
The AXIS V5925 occupies a distinct position in the PTZ camera market by combining genuine broadcast-grade outputs, balanced XLR audio with phantom power, and AXIS PTZ Autotracking in a single ceiling-mount indoor dome. A standard PTZ camera provides pan, tilt, and zoom over a network stream. The V5925 goes further by outputting simultaneously over 3G-SDI, HDMI, and IP, supporting VISCA control, and accepting studio-grade microphone inputs at the camera head itself. These are capabilities that cannot be replicated by substituting a conventional surveillance PTZ. The ARTPEC-7 processor supports the AXIS Camera Application Platform, so analytics and functionality can be expanded after installation without replacing hardware. For integrators specifying AV systems where camera control, audio, and production-quality video output must converge at a single ceiling-mounted point, the V5925 provides capabilities that are difficult to match in this form factor. Available through Security Wholesalers as part of the professional Axis Communications range.
Buyer Decision Tips
PoE Budget and Power Draw: The AXIS V5925 draws 30 W over PoE. Standard PoE (802.3af) provides only 15.4 W, and PoE+ (802.3at) provides up to 30 W. Confirm that your switch or PoE injector supports 802.3at PoE+ and has sufficient per-port power budget before installation. Underspecified switches will either not power the camera or throttle its functions.
NDI Licence Is Not Included: The V5925 is NDI-compatible but the NDI licence must be purchased separately before NDI streaming is active. If your production workflow depends on NDI from day one, factor the licence cost into your project budget and confirm the licence acquisition process with your Axis reseller before the installation date.
Key Features & Technical Specifications
| Model |
AXIS V5925 PTZ Network Dome Camera (50 Hz / AU variant) |
| Sensor |
1/2.8″ progressive scan RGB CMOS |
| Resolution |
1920 x 1080 (Full HD 1080p) |
| Frame Rate |
Up to 60 fps |
| Lens |
4.4-132 mm, F1.4-4.6; autofocus; P-iris control |
| Optical Zoom |
30x optical; 12x digital; 360x total |
| Horizontal Field of View |
62 degrees to 2.3 degrees |
| Vertical Field of View |
37 degrees to 1.3 degrees |
| Pan Range / Speed |
+/-170 degrees; 0.2-100 degrees/s |
| Tilt Range / Speed |
-20 to 90 degrees; 0.2-90 degrees/s |
| Preset Positions |
256 |
| Min. Illumination |
Colour: 1.0 lux at 30 IRE F1.4; B/W: 0.03 lux at 30 IRE F1.4 |
| Day/Night |
Automatically removable infrared-cut filter (ICR); no built-in IR illuminator |
| Video Compression |
H.265 (Zipstream), H.264 (Zipstream), MJPEG |
| Video Outputs |
3G-SDI, HDMI |
| Audio |
Two-way stereo; 2 x XLR balanced inputs with 48 V phantom power; 3.5 mm input and output; AAC-LC, G.711, G.726, Opus, LPCM encoding |
| Smart Features |
AXIS Video Motion Detection, AXIS PTZ Autotracking, AXIS Camera Application Platform (ACAP) |
| NDI |
NDI compatible (licence purchased separately) |
| Camera Control |
VISCA joystick and VISCA over IP |
| Processor / Memory |
ARTPEC-7 SoC; 1 GB RAM; 512 MB Flash |
| Local Storage |
Memory card slot |
| Power |
PoE (802.3at PoE+); 30 W power draw |
| Alarm I/O |
Yes |
| Operating Temperature |
0 to 40 degrees C |
| Installation |
Indoor ceiling/wall mount dome; no IP ingress protection rating |
| Security |
Signed firmware, secure boot |
Ideal Use Cases
University Lecture Theatres
AXIS PTZ Autotracking follows a lecturer moving across a stage while 256 preset positions allow instant recall of framing for different teaching configurations. The 30x optical zoom captures readable detail from the rear of a large auditorium over a single ceiling-mounted camera position.
Houses of Worship
The dome form factor mounts unobtrusively in heritage and contemporary church ceilings. XLR inputs with 48 V phantom power connect directly to condenser microphones used for audio capture, while 3G-SDI and HDMI outputs feed the in-house production system alongside the IP stream.
Corporate Conference Rooms
VISCA over IP integrates the V5925 with room control systems and third-party AV controllers for seamless PTZ operation during video conferences. HDMI output connects directly to in-room displays or conferencing appliances without requiring a separate decoder.
Live Event Production Studios
Simultaneous 3G-SDI, HDMI, and IP network streaming allows the V5925 to serve as both a production camera and a network-streamed source from a single installation point, reducing the number of camera positions needed in a live-switched production environment.
NDI-Based Production Workflows
With an NDI licence applied, the V5925 becomes discoverable on NDI networks and can be routed into software production switchers used in broadcast, esports, and streaming productions without requiring SDI or HDMI cabling to the production desk.
Court Rooms and Council Chambers
256 preset positions and VISCA control allow precise, repeatable framing of specific seating positions or podiums. Zipstream compression reduces the storage footprint of continuous recording over long sitting days, while signed firmware and secure boot protect the integrity of recorded evidence.
Choosing the Right Model
- Choose this model if: Your installation requires PTZ Autotracking, broadcast-quality audio input at the camera head (XLR with 48 V phantom power), and simultaneous 3G-SDI, HDMI, and IP network output from a single ceiling-mounted indoor dome – particularly in lecture capture, live production, or AV-integrated conference environments.
- Choose a different model if: Your installation is outdoors or in a wet environment, as the V5925 carries no IP ingress protection rating and is designed for indoor use only. Similarly, if you need built-in IR illumination for low-light surveillance in unlit spaces, a PTZ with integrated IR would be more appropriate. If NDI is a core day-one requirement and licence cost is a constraint, verify total cost before specifying.
- Choose a different model if: Your switch infrastructure only supports standard 802.3af PoE at 15.4 W per port. The V5925 requires 802.3at PoE+ at 30 W, so a switch upgrade or PoE injector would be needed if your existing infrastructure cannot meet this requirement.
FAQs
- Does the AXIS V5925 have a built-in IR illuminator for low-light use?
No. The V5925 uses an automatically removable infrared-cut filter for day/night switching but has no built-in IR illuminator. Its minimum illumination is 1.0 lux in colour and 0.03 lux in black and white at F1.4, which suits well-lit indoor environments. For unlit or very poorly lit spaces, a camera with integrated IR illumination would be a better fit.
- Can the V5925 be installed outdoors?
No. The AXIS V5925 carries no IP ingress protection rating and is specified for indoor use only within an operating temperature range of 0 to 40 degrees C. Installing it in an outdoor or exposed environment would risk moisture and dust damage and would void warranty coverage.
- What PoE standard does the V5925 require?
The V5925 draws 30 W and requires 802.3at PoE+ (high-power PoE). Standard 802.3af PoE delivers only 15.4 W per port, which is insufficient. Before installation, confirm that every switch port or PoE injector supplying the camera is rated to deliver at least 30 W at the port level.
- Is NDI included out of the box, or does it need a separate licence?
NDI compatibility is built into the V5925 hardware, but the NDI licence must be purchased separately before NDI streaming is active. If you are specifying the camera for an NDI-based production workflow, factor the licence cost and procurement time into your project plan and confirm the process with your Axis reseller at the time of ordering.
- How does AXIS PTZ Autotracking work, and is it included with the camera?
AXIS PTZ Autotracking uses onboard processing to detect and follow a moving subject across the camera’s pan/tilt/zoom range without manual operator input. It is included with the V5925 as a built-in feature and does not require a separate licence or add-on application. It is particularly useful in unattended lecture capture or house-of-worship streaming where a camera operator is not available.
- Can I control the V5925 with a VISCA joystick or third-party camera controller?
Yes. The V5925 supports VISCA joystick control and VISCA over IP, making it compatible with the camera control systems commonly used in broadcast and AV production environments. This allows the camera to be integrated into existing multi-camera production control setups without requiring Axis-specific control hardware.
- What audio inputs does the V5925 support, and can I connect professional condenser microphones directly?
Yes. The V5925 provides 2 balanced XLR inputs with 48 V phantom power, which allows professional condenser microphones to connect directly at the camera head. A 3.5 mm input and output are also available for less demanding audio connections. Audio is encoded in AAC-LC, G.711, G.726, Opus, and LPCM formats over the network, and in AES3 24-bit 48 kHz over the SDI output. This level of audio integration is not found in standard IP PTZ surveillance cameras, and it is one of the reasons the V5925 is available through Security Wholesalers as a specialised professional AV and broadcast camera.
Additional Information
AXIS 01965-006 Datasheet
