Product Overview
Rail operators, transit authorities, and fleet managers needing certified in-vehicle surveillance will find the Axis P3925-R M12 purpose-built for the demands of rolling stock and passenger vehicle environments. This 2MP full HD 1080p fixed dome camera is engineered to meet EN50155, EN45545, and NFPA 130 transportation standards, making it a credible choice for train, tram, and bus installations where compliance is a procurement requirement. Featuring a 2.8mm F1.6 lens delivering a 110-degree horizontal field of view, the P3925-R M12 covers wide passenger compartment areas from a single ceiling mount point. Equipped with electronic image stabilisation, Lightfinder technology, and Forensic WDR, it manages the vibration, variable lighting, and contrast conditions common inside moving vehicles. It also includes a microSD card slot for optional onboard storage and supports AXIS Camera Application Platform for third-party application deployment. The rugged IP66/67 and IK10-rated metal housing with M12 D-coded connector completes a camera built to survive the mechanical and environmental stresses of daily transit operation.
Key Capabilities
EN50155 and EN45545 Transportation Compliance
The P3925-R M12 is certified to EN50155, EN45545, and NFPA 130, meeting the electrical, fire, and operational standards required for railway and transit vehicle installations. This simplifies procurement and system approval on regulated rail and mass transit projects.
Electronic Image Stabilisation
Continuous vibration and movement are unavoidable on rolling stock. The built-in electronic image stabilisation actively compensates for shaking, keeping footage usable during travel and reducing the frame blur that would otherwise compromise identification or incident review on a moving vehicle.
Lightfinder with Automatic IR-Cut Filter
Rather than relying on an IR illuminator, the camera uses Axis Lightfinder technology and an automatically removable IR-cut filter to transition between colour and monochrome in low-light conditions. Minimum illumination reaches 0.01 lux in B/W mode, covering dimly lit carriages and tunnels without additional lighting.
Forensic WDR and 110-Degree Coverage
The 2.8mm F1.6 lens captures a 110-degree horizontal field of view, wide enough to cover an entire passenger bay or vehicle entrance from a single ceiling mount. Forensic WDR handles the high-contrast lighting typical at doorways or windows facing bright station platforms.
Axis Zipstream with H.265 and H.264
Zipstream technology dynamically lowers bitrate during low-activity periods while retaining full detail on events that matter. This directly reduces storage consumption on the onboard microSD card or connected recorder, which is critical when network bandwidth on a moving vehicle is constrained or intermittent.
ACAP and Built-In Analytics
AXIS Motion Guard, Fence Guard, Loitering Guard, Video Motion Detection, and active tampering alarm are included. The AXIS Camera Application Platform allows additional third-party analytics to be deployed directly on the camera, extending capability without requiring separate processing hardware onboard the vehicle.
Best For
- Rail and Tram Passenger Compartments: The EN50155 certification, IK10 dome housing, and electronic image stabilisation make this camera specifically suited to carriage ceiling installations on trains and trams where vibration, temperature extremes, and compliance requirements are non-negotiable.
- Bus and Coach Interiors: The wide 110-degree horizontal field of view covers passenger seating areas from a single overhead mount point, reducing the number of cameras needed per vehicle while the M12 D-coded connector provides a secure, vibration-resistant connection.
- Vehicle Entrance and Exit Monitoring: Forensic WDR handles the extreme contrast between bright exteriors and shaded interiors at doorways and boarding points, maintaining legible footage of passengers entering and exiting at station stops.
- Projects Requiring Edge Storage: The microSD/microSDHC/microSDXC card slot provides local video buffering or standalone recording, which is valuable when reliable network connectivity to a central VMS is unavailable during transit between stations.
Why Choose the Axis P3925-R M12
The Axis P3925-R M12 is not a repurposed standard network camera adapted for vehicle use. It is designed from the ground up for rolling stock, with EN50155, EN45545, and NFPA 130 certification confirming compliance with the electrical, fire smoke and toxicity, and transit-specific operational standards that most general-purpose cameras cannot meet. The M12 D-coded connector resists loosening under vibration, the -40 to 55 degrees Celsius operating range covers the temperature swings experienced in unheated rail stock and outdoor-exposed vehicles, and the IK10/IP66/67 metal housing withstands the knocks and cleaning conditions common in public transit environments. At 45fps, it captures fast-moving events more smoothly than standard 25fps cameras. Available through Security Wholesalers, the P3925-R M12 also supports ACAP for on-camera analytics and integrates with Axis ecosystem management tools, making it a practical long-term platform for fleet-wide surveillance deployments rather than a point solution with limited expandability.
Buyer Decision Tips
Connector and Cabling: The P3925-R M12 uses a female M12 D-coded connector rather than a standard RJ45 port. Confirm that your onboard network infrastructure and PoE supply support M12 D-coded cabling before ordering. Standard Ethernet patch cables will not connect directly to this camera without an appropriate adapter or M12-to-RJ45 conversion cable.
No Built-In IR Illuminator: This camera achieves low-light performance through Lightfinder and an IR-cut filter, not an active IR emitter. If the vehicle interior has no ambient lighting at night or in tunnels, verify that existing carriage lighting provides enough residual light for the camera to meet your minimum illumination requirements. The confirmed minimum is 0.01 lux in B/W mode at F1.6.
Key Features & Technical Specifications
| SKU | 01933-001 |
| Brand | Axis Communications |
| Resolution | 2MP, 1920×1080 Full HD 1080p |
| Image Sensor | 1/2.9″ Progressive Scan RGB CMOS |
| Lens | 2.8mm, F1.6, M12 mount, fixed iris |
| Field of View | 110 degrees horizontal, 62 degrees vertical |
| Day/Night | Automatic IR-cut filter with Lightfinder technology. No built-in IR illuminator. |
| Minimum Illumination | B/W: 0.01 lux at 30 IRE F1.6; Colour: 0.06 lux at 30 IRE F1.6 |
| Max Frame Rate | 45 fps |
| Video Compression | H.265, H.264, Motion JPEG with Axis Zipstream (H.264 and H.265) |
| Smart Features / Analytics | AXIS Motion Guard, Fence Guard, Loitering Guard, Video Motion Detection, Active Tampering Alarm, ACAP support, Electronic Image Stabilisation, Forensic WDR, Defog, Corridor Mode, Digital PTZ, Privacy Mask |
| Local Storage | microSD/microSDHC/microSDXC card slot (card not included) |
| Network Connector | Female M12 D-coded connector |
| Power | PoE Class 2 (IEEE 802.3af / 802.3at) |
| IP / Impact Rating | IP66/IP67, IK10 |
| Operating Temperature | -40°C to 55°C, 10-95% non-condensing relative humidity |
| Standards Compliance | EN50155, EN45545, NFPA 130; ONVIF Profile G, Profile M, Profile S, Profile T |
| Dimensions / Weight | 4.3 x 4.3 x 1.9 inches; 14.46 oz |
Ideal Use Cases
Passenger Train Carriages
EN50155 and EN45545 certification meets the requirements of railway vehicle procurement programs. The IK10 dome and -40 to 55 degrees Celsius operating range handle the mechanical stress and temperature variation of rail environments across all Australian climate zones.
Light Rail and Tram Interiors
Electronic image stabilisation maintains clear footage despite track-induced vibration and cornering. The 110-degree horizontal field of view covers the width of a tram saloon from a single overhead dome, reducing total camera count per vehicle.
Public Bus and Coach Fleet
The M12 D-coded connector resists vibration-induced loosening on road vehicles. Forensic WDR manages the contrast between shaded interior seating areas and bright windows or exterior stops, keeping passenger and driver area footage legible throughout the route.
Vehicle Doorway and Boarding Zone
The wide 110-degree field of view positioned at a vehicle entrance captures boarding and alighting passengers clearly. Forensic WDR reduces overexposure when station platform lighting or daylight floods through open doors during dwell time.
Tunnel and Low-Light Transit Routes
Lightfinder technology and the automatically removable IR-cut filter allow the camera to transition to 0.01 lux monochrome sensitivity, maintaining usable footage in tunnels and poorly lit sections of route where ambient vehicle lighting is the only available source.
Choosing the Right Model
- Choose this model if: Your project requires a certified EN50155-compliant in-vehicle dome camera with electronic image stabilisation, a wide 110-degree field of view, and a rugged M12 D-coded connector for railway, tram, or bus applications operating across a wide temperature range.
- Choose a different model if: You need a standard building-mounted network dome camera for fixed infrastructure – this camera’s M12 connector, transportation certifications, and vehicle-specific design add cost and complexity that are unnecessary outside of mobile or rolling stock applications.
- Choose a different model if: Your vehicle interior has no ambient lighting at night and you require active IR illumination – this camera achieves low-light performance through Lightfinder only, with no built-in IR emitter, so it depends on existing vehicle lighting to function in full darkness.
FAQs
- What does EN50155 compliance mean and why does it matter for this camera?
EN50155 is the European standard governing electronic equipment used on railway rolling stock, covering power supply variations, temperature, humidity, vibration, and shock. A camera certified to EN50155 has been tested to function reliably under the specific electrical and mechanical conditions found in train and tram environments, which is often a mandatory requirement for rail procurement projects in Australia and internationally. - Why does the P3925-R M12 use an M12 connector instead of a standard RJ45 Ethernet port?
M12 D-coded connectors are designed for industrial and transportation environments where standard push-fit RJ45 connectors can loosen under constant vibration. The threaded M12 connector locks securely to the cable, maintaining a reliable network and PoE connection throughout the operational life of the vehicle without the risk of intermittent disconnection from mechanical movement. - Does this camera have a built-in IR illuminator for night vision?
No. The P3925-R M12 does not include a built-in IR illuminator. Low-light performance is achieved through Axis Lightfinder technology and an automatically removable IR-cut filter, allowing the sensor to reach 0.01 lux minimum illumination in monochrome mode. The camera relies on existing ambient lighting – such as vehicle interior lighting – rather than projecting its own IR light. - Can footage be stored directly on the camera without a network recorder?
Yes. The camera includes a microSD/microSDHC/microSDXC card slot that supports optional local video storage. This is particularly useful for in-vehicle deployments where continuous network connectivity to a central VMS is not guaranteed during transit. The microSD card is not included and must be purchased separately. - What analytics are available on the P3925-R M12?
The camera includes AXIS Motion Guard, Fence Guard, Loitering Guard, Video Motion Detection, and an active tampering alarm as standard. It also supports the AXIS Camera Application Platform, which allows compatible third-party analytics applications to be installed and run directly on the camera without requiring a separate processing device onboard the vehicle. - What is the operating temperature range and is this camera suitable for use in Australian conditions?
The P3925-R M12 is rated to operate between -40 degrees Celsius and 55 degrees Celsius. This range covers the extreme cold of unheated rail stock in alpine regions and the high ambient temperatures experienced in vehicle interiors in northern Australia during summer, making it suitable for operation across the full range of Australian climate conditions. - How does electronic image stabilisation benefit in-vehicle surveillance footage?
Vehicles generate continuous vibration from engines, rail joints, road surfaces, and cornering. Without stabilisation, this vibration creates blur and jitter that makes footage harder to review and reduces the accuracy of motion-based analytics. The electronic image stabilisation in the P3925-R M12 compensates for this in real time, delivering smoother footage that is more useful for incident investigation and evidence purposes. The Axis P3925-R M12 is available through Security Wholesalers for fleet and transit projects requiring certified in-vehicle camera solutions.
Cabling Considerations
- Connector Type: The P3925-R M12 uses a female M12 D-coded network connector. Standard RJ45 patch cables are not compatible. Installations require M12 D-coded Ethernet cables or an approved M12-to-RJ45 adapter cable matched to the vehicle’s onboard infrastructure.
- PoE Supply: The camera operates on PoE Class 2 per IEEE 802.3af/802.3at. Confirm that your onboard PoE switch or PoE injector supports M12-terminated output or provides an appropriate interface. Standard rack-mount PoE switches will require adapter cabling to connect to the M12 port.
- Cable Routing in Vehicles: Route cabling through vehicle-approved conduit or cable management channels to protect against vibration-induced abrasion. Ensure cable runs comply with EN50155 and EN45545 requirements for fire resistance and cable placement within rolling stock.
- Wiring Tips: Use strain relief at the M12 connector entry point to prevent cable fatigue from repeated flexing during vehicle operation. Verify that all cable lengths comply with standard PoE distance limits of 100 metres per segment from the PoE source to the camera.
Additional Information





















