Product Overview
Built specifically for onboard vehicle and rolling stock surveillance, the AXIS P3925-R is a 2MP full HDTV 1080p fixed dome network camera engineered to meet the demanding requirements of the transportation industry. Supplied here as a 10-unit bulk pack (part number 01920-021), this camera carries compliance with EN50155, EN45545, and NFPA 130, making it a purpose-built option for rail, metro, tram, and bus fleet deployments rather than a general-purpose dome camera adapted to fit. Featuring electronic image stabilisation to compensate for the constant vibration experienced in moving vehicles, a wide 110-degree horizontal field of view from its 2.8mm F1.6 lens, and an operating temperature range of -40 degrees C to 55 degrees C, the P3925-R is designed to perform where standard IP cameras cannot. It also incorporates Axis Forensic WDR, Axis Lightfinder, and onboard analytics including Motion Guard, Fence Guard, and Loitering Guard. The housing is IK10-rated and IP66/67-certified aluminium with a polycarbonate dome, suited to the physical punishment of in-service transit environments.
Key Capabilities
Transportation Industry Compliance
Certified to EN50155 (rolling stock electronics), EN45545 (railway fire protection), and NFPA 130 (fixed guideway systems), the P3925-R meets the specific regulatory requirements that disqualify standard IP cameras from use in transit fleet projects.
Electronic Image Stabilisation
Onboard electronic image stabilisation compensates for the continuous vibration and motion typical of moving rail and bus vehicles, keeping footage usable for review and analytics rather than producing blurred, unusable video during transit.
Wide 110-Degree Field of View
The 2.8mm F1.6 M12 lens delivers a 110-degree horizontal field of view, allowing a single camera to cover a passenger carriage aisle, vestibule, or bus interior without requiring multiple units to achieve full coverage of the space.
Extreme Temperature and Rugged Housing
Rated IP66/67, NEMA 4X, and IK10, with an operating range of -40 degrees C to 55 degrees C, the aluminium and polycarbonate housing withstands temperature extremes, moisture, and physical impact common across outdoor rolling stock and mixed-environment vehicle installations.
Onboard Analytics and Lightfinder
Axis Motion Guard, Fence Guard, Loitering Guard, Forensic WDR, and Lightfinder (minimum 0.01 lux in B/W mode) are built in. The ACAP platform also allows third-party applications to be installed directly on the camera for expanded analytics without additional hardware.
Best For
- Rail and Metro Fleet Projects: EN50155 and EN45545 compliance make this camera appropriate for onboard installations in train carriages and metro vehicles where certification is a project requirement, not an optional extra.
- Bus and Tram Surveillance: The 110-degree wide-angle lens and electronic image stabilisation suit the confined dimensions and constant motion of bus interiors and tram carriages, covering passenger seating areas and entry points from a ceiling-mounted position.
- Multi-Unit Fleet Deployments: The 10-pack format suits transit operators, integrators, and system designers deploying across multiple vehicles or carriages, reducing per-unit cost and simplifying procurement for large-scale rollouts.
- Low-Light Cabin Environments: Axis Lightfinder and the F1.6 aperture allow usable colour imaging down to 0.06 lux, covering the varying interior lighting conditions found in passenger cabins, particularly at night or in tunnels where ambient light levels drop significantly.
Why Choose the AXIS P3925-R 10-Pack
The AXIS P3925-R (01920-021) is not a general-purpose dome camera pressed into transit duty. Its EN50155 certification, combined with EN45545 and NFPA 130 compliance, means it is built from the ground up for rolling stock environments where regulatory approval is a project prerequisite. A standard IP dome camera – even one with similar resolution and weatherproofing – cannot substitute for this certification on compliant transit projects. Beyond compliance, the electronic image stabilisation addresses a practical problem that static installations never face: footage captured during vehicle motion is kept stable and reviewable rather than degraded by vibration. The confirmed -40 degrees C to 55 degrees C operating range covers cold-climate depot environments and high-temperature summer conditions within the same unit. Supplied in a 10-pack, this part is well suited to integrators and fleet operators managing large-scale deployments, available through Security Wholesalers as part of the Axis transportation camera range.
Buyer Decision Tips
No Built-In IR Illumination: The AXIS P3925-R does not include built-in infrared LEDs. It relies entirely on ambient light within the vehicle. For typical passenger carriage, bus interior, and driver cabin installations this is not a limitation, as these spaces maintain interior lighting during operation. However, if the camera is intended for a vehicle exterior position or an area with no ambient lighting at night, supplementary illumination must be planned separately. Confirm lighting conditions at the intended mounting position before specifying this model for exterior vehicle applications.
10-Pack Procurement and Lens Flexibility: Part number 01920-021 supplies 10 cameras at a fixed 2.8mm lens, which provides a 110-degree horizontal field of view. This fixed focal length is well matched to typical carriage aisle and bus interior coverage distances, but it is not adjustable. If your project includes positions requiring a narrower field of view or greater optical reach – such as end-of-carriage or platform-facing exterior positions – confirm that 2.8mm coverage suits all planned mounting points before ordering the full pack quantity.
Key Features & Technical Specifications
| Model | AXIS P3925-R (10-pack, part 01920-021) |
| Resolution | 1920×1080 (2MP, Full HDTV 1080p) |
| Frame Rate | Up to 25/30 fps at 1080p; up to 45 fps at 1280×720 |
| Sensor | 1/2.9″ RGB CMOS |
| Lens | 2.8mm, F1.6, M12 mount, fixed iris |
| Horizontal Field of View | 110 degrees |
| Vertical Field of View | 62 degrees |
| Minimum Illumination (Colour) | 0.06 lux at 30 IRE F1.6 |
| Minimum Illumination (B/W) | 0.01 lux at 30 IRE F1.6 |
| Built-In IR | None |
| Day/Night | Automatically removable infrared-cut filter |
| Video Compression | H.264, H.265, Motion JPEG; Axis Zipstream |
| Local Storage | microSD/microSDHC/microSDXC slot |
| Power | PoE Class 2 (IEEE 802.3af); PoE+ (IEEE 802.3at) |
| Network Connector | RJ-45 |
| Weatherproofing | IP66/67, NEMA 250 4X |
| Impact Rating | IK10 |
| Operating Temperature | -40 degrees C to 55 degrees C |
| Operating Humidity | 10%-100% RH |
| Transportation Certifications | EN50155, EN45545, NFPA 130 |
| Analytics | AXIS Motion Guard, Fence Guard, Loitering Guard, Video Motion Detection, active tampering alarm, block view detection; ACAP supported |
| Image Technology | Axis Forensic WDR, Axis Lightfinder, electronic image stabilisation, digital pan/tilt, digital zoom |
| Casing | Aluminium with polycarbonate clear dome |
| Dimensions | 49.4 x 110 mm |
| RAM | 1 GB |
| Audio | None |
| Pack Quantity | 10 units |
Ideal Use Cases
Train and Metro Carriages
EN50155 and EN45545 certification directly satisfies the regulatory requirements for onboard electronics and fire protection in rail carriages, while the 110-degree lens covers seating areas and vestibules from a single ceiling mount point.
Bus Fleet Interiors
The wide field of view and IK10 impact resistance suit bus ceiling mounting, covering passenger seating and the boarding area. Electronic image stabilisation maintains usable footage quality on routes with uneven road surfaces or frequent stop-start motion.
Tram and Light Rail Vehicles
NFPA 130 compliance addresses fixed guideway transit system requirements, making the P3925-R applicable in tram and light rail projects where this standard is specified alongside EN50155 for onboard camera systems.
Driver Cabin Monitoring
The minimum illumination of 0.01 lux in B/W mode and Axis Lightfinder allow this camera to capture usable footage in the low-ambient-light conditions of a driver cabin, particularly during night-time operations or in tunnel segments.
Large-Scale Fleet Rollouts
The 10-pack format suits transit operators and system integrators fitting out multiple vehicles or multi-carriage trains in a single project phase. Zipstream compression reduces recording storage demand across a large number of simultaneously active camera streams.
Choosing the Right Model
- Choose this model if: Your project is for rolling stock or transit vehicles requiring EN50155, EN45545, or NFPA 130 compliance, the deployment involves 10 or more camera positions, and interior ambient lighting is available at all monitored locations.
- Choose a different model if: You need built-in IR illumination for areas with no ambient light at night, require a varifocal or longer focal length lens for narrower coverage at distance, need onboard audio capture, or are specifying for a static fixed infrastructure installation where transportation certification adds no value and a standard IP dome would meet the brief.
FAQs
- Does the AXIS P3925-R have built-in infrared LEDs?
No. The P3925-R does not include built-in IR illumination. It is designed for vehicle cabin environments where interior lighting is present during operation. It does include an automatically removable IR-cut filter and Axis Lightfinder for sensitivity in low ambient light, reaching 0.01 lux in B/W mode, but it cannot produce its own illumination in total darkness. Supplementary lighting must be provided if the camera is to be installed in an unlit location. - What does EN50155 compliance mean, and why does it matter for this camera?
EN50155 is the European standard governing electronic equipment used on rolling stock. Compliance confirms the camera has been tested to withstand the temperature cycling, vibration, humidity, and power supply variations specific to railway vehicle environments. For transit operators and integrators specifying onboard cameras, EN50155 is frequently a mandatory project requirement. A camera without this certification cannot be substituted, regardless of its technical specifications. - How does electronic image stabilisation work in a moving vehicle?
Electronic image stabilisation (EIS) uses digital processing to compensate for the small, rapid movements caused by vehicle vibration and motion. Rather than physically moving the lens or sensor, EIS analyses consecutive frames and adjusts the output image to reduce blur and camera shake. The result is footage that remains usable for incident review and analytics even when the vehicle is in motion on track or road surfaces. - Can footage be stored locally on the camera without a network recorder?
Yes. The P3925-R includes a microSD/microSDHC/microSDXC card slot, allowing local video storage directly on the camera. This is useful in vehicle deployments where a continuous network connection to a central recorder may not always be available, or where edge storage is required as a buffer before footage is transferred to a central system when the vehicle returns to a depot. - What analytics are available on the AXIS P3925-R?
The camera supports AXIS Motion Guard, Fence Guard, Loitering Guard, and standard Video Motion Detection out of the box. It also includes active tampering alarm and block view detection, which triggers an alert if the camera’s view is covered, spray-painted, or moved out of focus. The AXIS Camera Application Platform (ACAP) is supported, allowing compatible third-party analytics applications to be installed directly on the camera. - Does this 10-pack include cameras with RJ-45 or M12 connectors?
Part number 01920-021 is specifically the RJ-45 variant of the AXIS P3925-R, supplied as a 10-unit bulk pack. This is confirmed in the Axis product data for this part number. If your vehicle installation requires M12 (D-coded) connectors for vibration-resistant connections common in rail environments, verify the correct variant is specified before ordering. Available through Security Wholesalers as part of the Axis transportation product range. - What is the operating temperature range, and does it cover depot cold-start conditions?
The P3925-R operates from -40 degrees C to 55 degrees C. This range covers cold-climate depot storage and overnight low temperatures experienced in Australian winters and international cold-weather transit environments, as well as the elevated temperatures that can build up in vehicle cabins during summer operation. The operating humidity tolerance is 10%-100% RH, accommodating condensation and high-humidity conditions common in transit environments.
Additional Information






















