Product Overview
Designed for mounting Axis PTZ positioning cameras and positioning units on interior or exterior walls, the AXIS T94J01A Wall Mount provides a purpose-built aluminium base that supports the specific camera models in the Axis positioning range. Constructed from powder-coated aluminium in Urban Grey, it carries a maximum load rating of 20 kg and meets IK10 impact resistance standards, making it a sound fit for exposed wall positions at building perimeters, loading docks, industrial yards, and outdoor walkways. Featuring 6 cable entry points, cabling can be routed through the back of the bracket or, via conduit adapters, from either side or the bottom, giving installers practical flexibility on site. It is rated NEMA 250 Type 4X for indoor and outdoor environments and is compatible with the AXIS T94N01G and T91B57 Pole Mounts when a pole installation is required instead. The T94J01A is supplied with a 3-year warranty and is free of PVC materials.
Key Capabilities
IK10 Impact Resistance
The bracket is rated IK10, meaning it withstands significant mechanical impacts. This matters on exposed outdoor walls where the mounting hardware may be accessible to passing vehicles, equipment, or deliberate interference.
NEMA 4X Weatherproofing
Rated NEMA 250 Type 4X, the T94J01A handles rain, dust, and corrosive conditions, making it equally suited to coastal industrial sites or covered indoor spaces where moisture or washdown activity is a factor.
Flexible Cable Routing
Six separate cable entries allow cabling through the back of the bracket or, using Axis ACI 3/4″ conduit adapters, from each side or from the bottom. This reduces visible cable runs and simplifies in-wall conduit connections during installation.
20 kg Maximum Load Rating
With a 20 kg load capacity, the bracket comfortably supports the heavier PTZ and thermal positioning cameras in the Axis range, including the Q8685-E and Q8641-E, without requiring additional reinforcement at the wall fixing point.
Best For
- Outdoor PTZ Camera Wall Installations: The IK10 rating and NEMA 4X certification make this bracket appropriate for exposed exterior wall positions where the mount will face weather, dust, and potential impact.
- Conduit-Fed Cable Runs: Sites that use in-wall or surface-mounted conduit benefit from the bracket’s 6 cable entries and compatibility with Axis ACI 3/4″ conduit adapters, keeping cabling contained and tidy.
- Axis Positioning Camera Deployments: Purpose-built compatibility with the AXIS Q8685-E, Q8685-LE, Q8641-E, Q8642-E, Q6215-LE, and T99A Positioning Units means the mount integrates without adaptation or modification.
Why Choose the AXIS T94J01A
The AXIS T94J01A is not a universal bracket. It is engineered specifically for Axis positioning cameras and delivers the structural load rating, cable management options, and environmental certifications those cameras require at the installation point. The 20 kg load rating handles the heavier PTZ and thermal units in the Axis range without additional bracing, while the 6 cable entries give installers conduit routing options that a standard third-party bracket would not accommodate. The powder-coated aluminium construction, Urban Grey finish, and IK10 certification mean the bracket maintains appearance and integrity at outdoor locations over time. It also pairs with the AXIS T94N01G and T91B57 Pole Mounts, giving site designers the option to convert from wall to pole positioning when site layout requires it. Available through Security Wholesalers, the T94J01A is supplied with a 3-year Axis warranty and meets RoHS, REACH, and WEEE compliance standards.
Buyer Decision Tips
Buyer Tip: The T94J01A is confirmed compatible with specific Axis positioning cameras and units, including the Q8685-E, Q8685-LE, Q8641-E, Q8642-E, Q6215-LE, and T99A Positioning Units. Before ordering, confirm your camera model appears on this list. If your site requires a pole installation rather than a wall installation, the AXIS T94N01G Pole Mount and AXIS T91B57 Pole Mount Grey are listed as compatible accessories and can be used in conjunction with or instead of this wall bracket.
Key Features & Technical Specifications
| Product Type | Wall mount bracket for Axis positioning cameras and positioning units |
| Material | Powder-coated aluminium |
| Colour | Urban Grey |
| Dimensions (W x D x H) | 39.4 cm x 22.2 cm x 21.7 cm |
| Weight | 4.5 kg |
| Maximum Load | 20 kg (44 lb) |
| Cable Entries | 6 (routable through back, side, or bottom via conduit adapters) |
| Conduit Compatibility | Axis ACI 3/4″ conduit adapters |
| Impact Rating | IK10 |
| Environmental Rating | NEMA 250 Type 4X |
| Installation Environment | Indoor and outdoor |
| Storage Temperature | -45°C to 70°C (-49°F to 158°F) |
| Compatible Cameras | AXIS Q8685-E, AXIS Q8685-LE, AXIS Q8641-E, AXIS Q8642-E, AXIS Q6215-LE, AXIS T99A Positioning Units |
| Compatible Accessories | AXIS T94N01G Pole Mount, AXIS T91B57 Pole Mount Grey, AXIS T95A64 Corner Bracket |
| Certifications | IEC/EN/UL 62368-1, IEC/EN/UL 60950-22, RoHS, REACH, WEEE |
| PVC Free | Yes |
| Warranty | 3 years |
Ideal Use Cases
Industrial Perimeter Walls
The IK10 impact rating and NEMA 4X certification make the T94J01A appropriate for perimeter wall positions at factories, warehouses, or logistics facilities where the bracket is exposed to vehicle movement, dust, and weather.
Critical Infrastructure Sites
Utilities, transport hubs, and data centres that deploy Axis Q8685-E or Q8641-E thermal positioning cameras for wide-area monitoring rely on rated mounting hardware. The T94J01A meets the structural and environmental requirements for these sites.
Conduit-Wired Commercial Buildings
Commercial buildings using in-wall or surface conduit for security cabling benefit from the bracket’s 6 cable entries, which allow neat conduit connections from the side or bottom using Axis ACI 3/4″ conduit adapters.
Indoor Positioning Unit Deployment
Where Axis T99A Positioning Units are installed inside large indoor spaces such as airport terminals, convention centres, or sports facilities, the T94J01A provides a structurally rated wall anchor point with cable management built in.
Choosing the Right Model
- Choose this model if: You are installing one of the confirmed compatible Axis positioning cameras or positioning units on a wall surface, indoors or outdoors, and require a bracket rated for IK10 impact, NEMA 4X weather exposure, and up to 20 kg of supported load.
- Choose a different model if: Your installation requires a pole mount rather than a wall mount. The AXIS T94N01G Pole Mount and AXIS T91B57 Pole Mount Grey are listed compatible accessories and are designed for pole-based positioning camera deployments. If your camera model is not listed in the T94J01A’s confirmed compatibility list, consult the camera’s own mounting accessory guide before ordering.
FAQs
- Which Axis cameras are confirmed compatible with the T94J01A?
The confirmed compatible camera and unit list includes the AXIS Q8685-E, AXIS Q8685-LE PTZ Network Cameras, AXIS Q8641-E and Q8642-E PT Thermal Network Cameras, AXIS Q6215-LE, and AXIS T99A Positioning Units. If your camera is not on this list, check the camera’s own accessory compatibility documentation before purchasing the T94J01A. - Can this bracket be used outdoors in harsh weather conditions?
Yes. The T94J01A is rated NEMA 250 Type 4X and IK10, confirming suitability for outdoor installations exposed to rain, dust, humidity, and mechanical impact. It is also approved for indoor use where environmental conditions such as washdown or moisture are present. - How are cables routed through the T94J01A?
The bracket has 6 cable entry points. Cables can be routed through the back of the bracket for a clean wall-penetration installation. By using Axis ACI 3/4″ conduit adapters, cabling can alternatively be brought in from either side or from the bottom of the bracket, accommodating surface-run conduit on the wall face. - What is the maximum camera weight this bracket can support?
The T94J01A is rated to a maximum load of 20 kg (44 lb). This covers the heavier positioning cameras in the Axis range, including PTZ and thermal variants, without requiring additional wall reinforcement beyond what is standard for the bracket’s fixing footprint. - Can the T94J01A be combined with a pole mount?
Yes. The AXIS T94N01G Pole Mount and AXIS T91B57 Pole Mount Grey are both listed as compatible accessories that can be used alongside the T94J01A. This gives installers flexibility to adapt the camera position from a wall mount to a pole-mounted configuration when site layout does not allow a direct wall fixing. The T94J01A is available through Security Wholesalers as part of the broader Axis mounting accessory range.




















