Product Overview
Flush-mounting a 2N IP intercom into plasterboard requires a dedicated back box that holds the unit securely and creates a clean, recessed finish – and that is exactly what the 2N Plasterboard Flush Mount Box (01349-001) is designed to do. Built for indoor drywall installations, this mounting accessory is compatible with the 2N IP Force, IP Force 2.0, and IP Safety intercom units, providing a purpose-made housing that slots into a standard wall cutout of 116 x 233 x 78 mm. Featuring a fixed-screw attachment method, it anchors the intercom firmly without the movement or instability common with generic back boxes. It is supplied at the correct depth to accommodate the intercom module while maintaining a flush wall profile. This makes it well suited to reception areas, internal corridor entry points, and commercial office fit-outs where a tidy wall finish is a priority alongside a secure intercom installation.
Key Capabilities
Purpose-Made Compatibility
Designed specifically for the 2N IP Force, IP Force 2.0, and IP Safety intercom units, this box eliminates guesswork around fitment depth, screw alignment, and cutout dimensions – giving installers a confirmed, manufacturer-approved solution.
Plasterboard-Ready Design
Engineered specifically for drywall and plasterboard surfaces, the box is sized to the required wall cutout of 116 x 233 x 78 mm, making it straightforward to install in new-build and commercial fit-out environments where stud walls are standard.
Flush Wall Finish
The recessed mounting approach keeps the intercom panel sitting flush with the wall surface, producing a professional finish suited to reception areas, office corridors, and commercial interiors where aesthetics and cable concealment both matter.
Screw-Fixed Attachment
The box attaches to the wall via screws, providing a stable, rattle-free mounting that holds the intercom unit firmly in place during daily use – avoiding the flex or pull-away issues that can occur with adhesive or clip-based alternatives.
Best For
- Plasterboard and Drywall Walls: The box is sized and rated for indoor drywall surfaces, making it the correct mounting solution for stud-wall installations in offices, apartments, and commercial premises.
- 2N IP Force and IP Safety Intercom Installations: This box is confirmed compatible with 2N IP Force, IP Force 2.0, and IP Safety units, making it an essential component when specifying a flush-mounted 2N intercom on these models.
- Commercial Fit-Outs Requiring a Clean Wall Profile: Reception desks, internal access control points, and corridor entry panels benefit from the flush, recessed finish this box provides, keeping cabling hidden and the installation looking intentional.
Why Choose the 2N Plasterboard Flush Mount Box (01349-001)
Where a 2N IP Force, IP Force 2.0, or IP Safety intercom needs to sit flush into a plasterboard wall, using a generic back box creates risks – incorrect depth, misaligned screw points, and a poor fit that can cause the intercom to shift or sit proud of the wall surface. The 01349-001 is the manufacturer-specified flush mount box for these exact models, with a confirmed wall cutout requirement of 116 x 233 x 78 mm and overall dimensions of 233.7 x 116.8 mm. It arrives ready to install with screw-based attachment, removing compatibility uncertainty on-site. It is backed by a 5-year warranty under 2N warranty terms. Available at Security Wholesalers, the 01349-001 is the correct accessory to complete a 2N intercom flush-mount installation to the standard the system manufacturer intends.
Buyer Decision Tips
Buyer Tip: Before ordering, confirm that your wall is plasterboard or drywall construction – this box is rated for indoor plasterboard use only and is not intended for masonry, concrete, or solid brick walls. Also verify that your intercom unit is a 2N IP Force, IP Force 2.0, or IP Safety model, as this box is designed specifically for those units. Measure the available wall depth at your installation point to confirm you can accommodate the 78 mm cutout depth required.
Key Features & Technical Specifications
| Part Number (2N) | 9151002 |
| Part Number (Axis) | 01349-001 |
| Product Type | Flush mount installation box for plasterboard/drywall |
| Compatible Devices | 2N IP Force, 2N IP Force 2.0, 2N IP Safety |
| Mounting Surface | Plasterboard / drywall (indoor only) |
| Attachment Method | Wall-mounted via screws |
| Required Wall Cutout | 116 x 233 x 78 mm |
| Dimensions | 233.7 x 116.8 mm (9.2 x 4.6 in) |
| Weight | 1.19 lb |
| Environment Rating | Indoor use only |
| Brand | 2N (an Axis Communications brand) |
| EAN | 8595159500379 |
| Warranty | 5 years (subject to 2N warranty terms at www.2n.com/warranty) |
Ideal Use Cases
Commercial Office Receptions
Reception walls in commercial offices are typically plasterboard construction, making this box a natural fit for 2N IP Force intercom installations that need to sit flush with the wall and present a tidy, professional appearance at the entry point.
Apartment Building Internal Entry Points
Apartment common areas with stud wall construction benefit from the flush-mount format, keeping the 2N IP Safety or IP Force panel recessed rather than surface-mounted, which reduces the risk of physical interference and keeps the installation looking clean.
New Commercial Fit-Outs
Builders and fitout contractors specifying 2N intercom systems during construction can plan the wall cutout to the confirmed 116 x 233 x 78 mm dimension during the framing stage, ensuring the box is set in before plasterboard is finished.
Internal Access Control Corridors
Internal corridor entry panels using the 2N IP Force or IP Safety can be installed flush using this box, eliminating protruding hardware in high-traffic walkways and keeping the intercom at the correct mounting height without additional bracketing.
Choosing the Right Model
- Choose this model if: You are installing a 2N IP Force, IP Force 2.0, or IP Safety intercom into a plasterboard or drywall wall and require a flush-mount finish with a confirmed cutout of 116 x 233 x 78 mm.
- Choose a different model if: Your installation wall is masonry, brick, or concrete – this box is designed for plasterboard only. For surface-mount installations on any wall type, a surface-mount box accessory designed for 2N intercoms would be the appropriate choice instead.
FAQs
- Which 2N intercom models is this flush mount box compatible with?
The 01349-001 is confirmed compatible with the 2N IP Force, 2N IP Force 2.0, and 2N IP Safety intercom units. It is a purpose-made accessory for these specific models and should not be assumed compatible with other 2N intercom products without checking the relevant product documentation. - What are the exact wall cutout dimensions required?
The wall cutout required is 116 mm wide x 233 mm tall x 78 mm deep. This depth is a critical dimension – confirm that your wall cavity at the installation point can accommodate 78 mm of depth before cutting, as plasterboard walls with shallow cavity framing may require adjustment. - Can this box be used on a masonry or brick wall?
No. The 01349-001 is designed for plasterboard and drywall surfaces only. For masonry or brick installations, a different mounting solution rated for solid wall use would be required. Using this box on masonry is not recommended as the attachment method is designed for stud wall construction. - How is the box secured to the wall?
The box attaches to the wall via screws. This screw-fixed method provides a firm, stable hold within the plasterboard wall cavity, keeping the intercom unit locked in position during everyday use without the risk of movement or pull-away. - Is this box available through Security Wholesalers, and what warranty does it carry?
Yes, the 2N Plasterboard Flush Mount Box (01349-001) is part of the Security Wholesalers range. It carries a 5-year warranty subject to 2N warranty terms, which are detailed at www.2n.com/warranty. This warranty period is consistent with 2N intercom accessories supplied through authorised distribution channels.

















