Product Overview
Built for demanding commercial and industrial entry points, the 2N IP Force is a rugged outdoor video door phone designed to withstand the harshest installation environments. With an IP69K rating for high-pressure washdown resistance and an IK10 vandal-proof aluminium housing, this 2-button call panel is engineered for exposed facades, gated yards, and high-traffic building entrances where durability is non-negotiable. Featuring a 1.3MP CMOS sensor with a wide 135° horizontal field of view and integrated IR night vision, it captures clear visitor images in both day and night conditions. Equipped with dual built-in microphones, a 10W speaker delivering 94dB output, and full-duplex audio with acoustic echo cancellation, conversations through the door are clear and immediate. It also integrates SIP 2.0 without requiring a dedicated server, supports calls to mobile devices over Wi-Fi or cellular, and includes a card reader interface for 125kHz, 13.56MHz RFID, and NFC credentials. This makes it well suited to multi-tenant buildings, industrial sites, and commercial premises requiring a fully integrated access and communication point.
Key Capabilities
IP69K and IK10 Protection
Rated IP69K for resistance to high-pressure, high-temperature water jets and IK10 for impact resistance up to 20 joules. This makes the unit suitable for food processing facilities, industrial wash-down areas, exposed outdoor walls, and high-vandalism entry points where standard outdoor ratings are insufficient.
135° Wide-Angle Camera with Night Vision
The 1/3″ CMOS sensor delivers a 135° horizontal and 109° vertical field of view, covering a wide approach zone at a typical entrance. Integrated IR illumination ensures recognisable visitor images are captured in low-light or no-light conditions at the door.
Full-Duplex Audio with Acoustic Echo Cancellation
Two built-in microphones and a 10W speaker rated at 94dB at 1 metre enable clear two-way conversation even in noisy outdoor environments. Full-duplex operation with acoustic echo cancellation prevents feedback, supporting natural, uninterrupted communication through the panel.
SIP 2.0 Integration – No Server Required
Native SIP 2.0 (RFC-3261) support allows the unit to connect directly into existing SIP-based phone systems or call mobile devices and tablets over a local Wi-Fi or cellular network. No dedicated SIP server is needed for basic operation, reducing infrastructure requirements for smaller sites.
Card Reader Ready – Multi-Format RFID and NFC
The panel includes an internal card reader interface supporting 125kHz and 13.56MHz RFID formats as well as NFC, allowing credential-based access control to be integrated into the same unit. This removes the need for a separate reader at the door in many deployments.
Picture to Email and VMS Integration
At the moment a call is initiated, the unit can automatically email a visitor snapshot to a nominated address, creating a timestamped record of every entry attempt. ONVIF and RTSP support also allows the camera stream to be integrated into existing CCTV or video management systems.
Best For
- Industrial and Food Processing Facilities: IP69K certification confirms the unit can be directly hosed down, making it appropriate for abattoirs, commercial kitchens, breweries, and wash-down zones where water ingress is a constant risk.
- Commercial Building Entrances and Gated Access Points: The 2-button call panel, wide-angle camera, and SIP integration suit office buildings, warehouses, and gated yards where controlled entry and remote answer capability are required.
- Sites with Existing SIP Phone Infrastructure: Businesses already operating a SIP-based phone system can connect this unit directly into their PBX, allowing staff to answer door calls from their existing desk phones or mobile devices without additional hardware.
- High-Vandalism Locations: The IK10-rated aluminium construction and operating temperature range of -40°C to 55°C make this suitable for exposed public-facing positions, including transport hubs, utility sites, and remote facilities.
Why Choose the 2N IP Force
The 2N IP Force sits above standard IP intercoms by combining certifications and integration features that most comparable units do not offer at this form factor. The IP69K rating is rare in door phone products and directly addresses installations where cleaning regimes, weather exposure, or industrial contamination make lower-rated units impractical. The IK10 aluminium housing adds a physical layer of resistance that plastic-bodied alternatives cannot match. The 10W speaker output at 94dB ensures the unit is heard clearly in loud environments such as loading docks and manufacturing floors. The built-in RFID and NFC card reader interface removes the need for a separate reader at the same entry point, reducing cabling and hardware costs. SIP 2.0 support with no mandatory server requirement gives smaller sites flexibility without infrastructure investment. Available through Security Wholesalers, the 2N IP Force is a commercially focused unit that justifies its position in projects where longevity, compliance, and integration depth matter.
Buyer Decision Tips
SIP Configuration: The 2N IP Force supports SIP 2.0 without a dedicated server, but for multi-site or multi-user deployments it integrates with SIP PBX systems including cloud-hosted options. Before installation, confirm whether your site requires peer-to-peer SIP calls to a single destination or a full PBX configuration to route calls across multiple extensions or mobile devices. This will determine your network and software setup requirements before the unit is mounted.
PoE Budget and Wiring: The 2N IP Force draws up to 12.95W under PoE 802.3af Class 0. Confirm your switch or injector can supply this per port, particularly in multi-door deployments where total PoE budget may become a limiting factor. If PoE is unavailable, the unit also accepts 12VDC at 2A via a local power supply, which may be a practical alternative at locations far from the data cabinet.
Key Features & Technical Specifications
| Brand | Axis Communications (2N product line) |
| Model | 2N IP Force |
| SKU | 01340-001 |
| Product Type | Video door phone / IP intercom – 2-button outdoor wall-mount sub station |
| Camera Resolution | 1.3MP – 1280 x 960 |
| Image Sensor | 1/3″ CMOS |
| Field of View | 135° horizontal, 109° vertical |
| Night Vision | Integrated IR illumination |
| Video Compression | H.264, H.263, H.263 Plus, MPEG4, MJPEG |
| Audio | 2 built-in microphones; 10W built-in speaker; 94dB at 1kHz at 1m; full-duplex with acoustic echo cancellation (AEC) |
| Audio Codecs | G.711, G.722, G.729, L16/16kHz |
| Signalling Protocol | SIP 2.0 (RFC-3261) |
| Supported Protocols | SIP 2.0, DHCP, SMTP, 802.1x, RTSP, RTP, TFTP, HTTP, HTTPS, Syslog, ONVIF |
| Network Interface | 1x RJ-45 10/100Base-TX Ethernet with Auto-MDIX |
| Card Reader | Built-in reader interface – 125kHz and 13.56MHz RFID; NFC supported |
| Power Supply | 12VDC ±15% at 2A or PoE 802.3af Class 0 (12.95W) |
| Weather Rating | IP69K |
| Vandal Rating | IK10 |
| Operating Temperature | -40°C to 55°C |
| Operating Humidity | 10% to 95% non-condensing |
| Housing Material | Aluminium |
| Dimensions | 217mm x 109mm x 83mm |
| Country of Origin | Czech Republic |
Ideal Use Cases
Industrial Facility Entry Gates
The IP69K rating allows the unit to be installed at factory gates, loading dock entry points, and processing plant entrances where regular wash-downs, rain exposure, and airborne contaminants are part of daily operations. The IK10 housing resists impact from incidental contact with vehicles and equipment.
Commercial Office Building Lobbies
Wall-mounted at a main building entrance, the 2-button panel allows visitors to call reception or security directly via SIP, with staff answering from their desk phone, softphone, or mobile. The Picture to Email feature creates an automatic snapshot log of every caller without requiring a separate VMS recording station.
Gated Residential Complexes and Multi-Tenant Sites
With 2 call buttons and SIP routing capability, the unit can direct calls to separate apartments, offices, or contacts from a single mounted panel. The wide 135° field of view captures the full approach area at a vehicle or pedestrian gate without requiring repositioning.
Remote and Unmanned Sites
The -40°C to 55°C operating range suits remote facilities in extreme climates including cold storage sites, mining operations, and regional infrastructure. Calls can be routed to mobile devices over cellular networks, allowing staff to manage entry remotely without being physically present at the site.
CCTV and VMS-Integrated Security Systems
ONVIF and RTSP support allows the 1.3MP camera stream to be pulled into an existing video management system, enabling operators to monitor the door camera alongside other site cameras from a single interface. This removes the need to manage the intercom video feed through a separate application.
Choosing the Right Model
- Choose this model if: Your installation site requires IP69K wash-down resistance or IK10 vandal protection, you need SIP-based calling to existing desk phones or mobile devices, you want an integrated RFID and NFC card reader in the same panel, or you are integrating the door camera stream into an existing VMS via ONVIF.
- Choose a different model if: Your application requires more than 2 call buttons at a single entry point, you need a higher-resolution camera for identification at distance rather than general visitor capture, or your site does not require IP69K and a standard IP65 or IP67 outdoor intercom would meet the environmental spec at a lower cost.
FAQs
- What does the IP69K rating on the 2N IP Force actually mean for installation?
IP69K is the highest available water ingress protection rating and certifies the unit against high-pressure, high-temperature water jets applied at close range. This goes significantly beyond the IP65 or IP66 ratings found on most outdoor intercoms. It means the panel can be installed in areas subject to regular industrial wash-downs, direct rain exposure in exposed positions, and environments where water is used as part of cleaning processes, without risk of internal damage. - Does the 2N IP Force require a SIP server to operate?
No. The 2N IP Force supports SIP 2.0 peer-to-peer calling without a dedicated SIP server. It can call a SIP address directly on a local network, including mobile apps that accept SIP calls over Wi-Fi or cellular data. For multi-destination routing or integration into a business phone system, connecting to an existing SIP PBX is supported but not mandatory for basic operation. - Can the built-in card reader replace a separate RFID reader at the same door?
In many installations, yes. The 2N IP Force includes an internal card reader interface supporting 125kHz (EM-format) and 13.56MHz (MIFARE, DESFire) RFID credentials as well as NFC. If your access control system uses these formats and can communicate with the unit over the network or via a Wiegand or relay output, a separate reader at the same position may not be needed. Confirm the specific credential format and reader output type required by your access control system before finalising the design. - How does the Picture to Email feature work and what does it capture?
When a visitor presses a call button, the 2N IP Force automatically captures a snapshot from its 1.3MP camera and emails it to a configured address. This creates a timestamped photographic record of every call event, independent of a VMS or recording system. It is useful for sites where visitor logging is required but a full recording infrastructure is not in place. - Can the 2N IP Force be integrated into an existing CCTV system?
Yes. The unit supports ONVIF and RTSP, which allows its camera stream to be added to compatible video management systems and NVRs. This enables operators to view the door camera alongside other site cameras from a single platform. The unit also supports H.264 and MJPEG compression formats, which are widely compatible with current VMS software. - What power options are available for the 2N IP Force?
The unit accepts PoE 802.3af Class 0, drawing up to 12.95W, or 12VDC at 2A via a local power supply. PoE is the preferred option for most installations as it simplifies cabling to a single Cat5e or Cat6 run. Where PoE is unavailable or the cable run exceeds practical limits, a local 12VDC power supply at the mounting point is a supported alternative. - Where can I purchase the 2N IP Force and get technical support in Australia?
The 2N IP Force (SKU 01340-001) is part of the Security Wholesalers range. For pre-sales configuration advice, compatibility questions regarding SIP integration or access control wiring, the Security Wholesalers team can assist with product selection and deployment planning prior to purchase.
Cabling Considerations
- Cable Type: Cat5e or Cat6 UTP or STP for PoE-powered installations. Use shielded cable (STP/FTP) in environments with significant electrical interference, such as near industrial machinery or high-voltage cabling.
- Maximum Cable Run: Up to 100 metres for PoE over Cat5e or Cat6 from the network switch or PoE injector to the unit, in line with IEEE 802.3af standard limits.
- PoE Considerations: The 2N IP Force is a PoE Class 0 device drawing up to 12.95W. Ensure your switch or injector can supply this per port. In multi-door deployments, calculate total PoE budget across all ports to confirm the switch can sustain full simultaneous load.
- Wiring Tips: If running cable through an outdoor conduit or exposed wall, ensure the conduit entry point is sealed to maintain the IP69K integrity of the installation. For the 12VDC alternative power option, use appropriately rated low-voltage cable and confirm the power supply is housed in a weatherproof enclosure if mounted externally. Where RFID access control wiring is required to a separate controller, confirm the Wiegand or relay output cable routing before mounting the panel.






















