Product Overview
Surface mounting the 2N IP Verso intercom system is straightforward with the 2N IP Verso 3-Module Surface Mount Frame in black. Designed specifically for use with the 2N IP Verso modular intercom platform, this frame holds up to 3 intercom modules and mounts directly onto a flat wall surface without requiring any additional mounting accessories. Featuring a slim profile of 107 x 339 x 28 mm and a clean black finish, it provides a tidy, professional appearance suited to commercial and residential entry points alike. The frame is engineered to align precisely with 2N IP Verso module layouts, keeping installation straightforward for integrators and security installers. Where the mounting surface is glass or uneven, use of a compatible backplate is recommended to ensure a secure and flush fit. This accessory is supplied as the frame only and does not include intercom modules.
Key Capabilities
3-Module Capacity
The frame accommodates up to 3 intercom modules from the 2N IP Verso range, allowing installers to configure a multi-function entry panel with combinations such as keypad, card reader, and camera modules within a single, neatly framed assembly.
Surface Mount Installation
Designed for direct surface mounting, this frame does not require a flush-mount box or additional accessory hardware for standard flat wall installations, reducing installation time and simplifying the hardware bill for entry-point projects.
Clean Black Finish
The black powder-coat finish gives the installed panel a consistent, professional appearance. It suits modern commercial entry facades, dark-coloured cladding, and architectural environments where a neutral, unobtrusive frame colour is preferred.
2N IP Verso Compatibility
Built exclusively to match the 2N IP Verso intercom system dimensions and module layout, this frame ensures precise alignment during installation and maintains the integrity of the finished panel appearance across multi-module configurations.
Best For
- Multi-Module 2N IP Verso Installations: Integrators building out 2N IP Verso entry panels with 2 or 3 modules will find this frame holds the configuration securely in a single footprint without additional hardware.
- Flat Wall Surface Entry Points: Suited to standard flat wall surfaces at building entries, lobby doors, and gate pillars where the panel sits proud of the wall rather than recessed.
- Commercial and Residential Access Projects: Wherever a neat, branded intercom presentation is required at an entry door, the black finish and precise module fit keep the installation looking intentional and professional.
Why Choose the 2N IP Verso 3-Module Surface Mount Frame Black
The 2N IP Verso 3-Module Surface Mount Frame Black is the manufacturer-specified mounting solution for surface installations of the 2N IP Verso intercom system. Unlike generic mounting plates or aftermarket brackets, this frame is dimensionally matched to the 2N IP Verso module system, ensuring the panel alignment, cable entry, and finished profile all sit correctly. With a compact depth of just 28 mm, it keeps the intercom panel low-profile against the wall while supporting the full weight and configuration of 3 modules at 1.61 lb. No additional accessories are required for a standard flat wall installation, which reduces installation complexity on site. Available at Security Wholesalers, this frame is the correct accessory to complete a surface-mounted 2N IP Verso entry panel installation and should be specified at the planning stage alongside the intercom modules themselves.
Buyer Decision Tips
Surface Type Matters: This frame is designed for flat, solid wall surfaces and requires no additional accessories in that scenario. If the mounting surface is glass, polished metal, tiled, or structurally uneven, a compatible 2N IP Verso backplate is recommended to ensure the frame sits flush and is secured correctly. Confirm the wall material and surface condition before ordering to determine whether a backplate is also required for your installation.
Key Features & Technical Specifications
| Brand | Axis Communications (2N) |
| Product Type | Surface Mount Frame (Mounting Accessory) |
| Compatible System | 2N IP Verso Intercom System |
| Module Capacity | 3 modules |
| Installation Type | Surface mount |
| Colour / Finish | Black |
| Dimensions | 107 x 339 x 28 mm (4.21 x 13.35 x 1.10 in) |
| Weight | 1.61 lb (approx. 730 g) |
| Additional Accessories Required (Flat Wall) | None |
| Backplate Recommended | Yes, for glass or uneven surfaces |
| EAN | 8595159509518 |
| SKU | 01292-001 |
Ideal Use Cases
Commercial Building Entry
Office buildings and commercial premises using the 2N IP Verso platform benefit from this frame’s clean black finish and 3-module capacity, allowing a keypad, card reader, and camera module to be presented neatly at the entry door.
Multi-Tenant Residential Complexes
Apartment buildings and residential complexes installing the 2N IP Verso at lobby or gate entry points can surface-mount this frame directly onto a wall pillar or entry surround without requiring a recessed housing.
Intercom Upgrade Projects
Where an existing intercom is being replaced with a 2N IP Verso system and no flush-mount conduit box is in place, this surface mount frame provides a complete mounting solution without structural wall modification.
Gate and Perimeter Entry Points
Gate pillars, perimeter entry posts, and exterior wall surfaces at vehicle or pedestrian access points are well suited to this surface-mount frame, allowing a 3-module 2N IP Verso panel to be installed securely and cleanly.
Choosing the Right Model
- Choose this model if: You are surface-mounting a 2N IP Verso intercom configuration with exactly 3 modules on a flat, solid wall surface and want to complete the installation without sourcing additional mounting hardware.
- Choose a different model if: Your installation requires a 1-module or 2-module frame configuration, a flush-mount (recessed) installation into a wall cavity, or if the surface is glass or uneven and you need a backplate to accompany the frame. In those cases, the appropriate 2N IP Verso frame variant for your module count and installation method should be selected instead.
FAQs
- Which intercom system is this frame designed for?
This frame is designed exclusively for the 2N IP Verso intercom system by Axis Communications. It is dimensionally matched to the 2N IP Verso modular platform and should not be used with other intercom brands or series. If you are building a 2N IP Verso entry panel, this is the correct surface mount frame for a 3-module configuration. - How many intercom modules does this frame support?
The frame supports 3 intercom modules from the 2N IP Verso range. This allows a typical configuration such as a camera module, a keypad module, and a card reader module to be mounted together within a single, cohesive panel. For configurations with fewer modules, a 1-module or 2-module frame variant should be selected instead. - Do I need any additional accessories to complete the surface installation?
For installation on a standard flat, solid wall surface, no additional accessories are required. The frame is supplied ready for surface mounting. However, if the mounting surface is glass, polished, tiled, or structurally uneven, a compatible 2N IP Verso backplate is recommended to ensure a flush and secure installation. - What are the frame dimensions and how much does it weigh?
The frame measures 107 x 339 x 28 mm (4.21 x 13.35 x 1.10 in) and weighs 1.61 lb. The 28 mm depth keeps the intercom panel relatively low-profile against the wall, which is an important consideration for high-traffic entry corridors and narrow doorway surrounds. - Where can I purchase this frame and is it available in other colours?
The 2N IP Verso 3-Module Surface Mount Frame in black is available through Security Wholesalers. Based on the confirmed product data, this listing covers the black finish variant with SKU 01292-001. If an alternative colour finish is required for your project, check the 2N IP Verso accessories range for other available frame options before ordering.

















