Product Overview
For installers fitting a 2N IP Verso intercom to a solid wall or surface where a flush cavity is not available, the 2N IP Verso 1-Module Surface Mount Frame in nickel provides a clean, complete mounting solution without requiring any additional accessories. Designed specifically for single-module Verso configurations, this metal frame sits directly against the wall surface and brings the intercom up to a finished, professional appearance. Featuring a durable nickel metal finish, it integrates neatly with the 2N IP Verso aesthetic and suits both commercial and residential entry points. The frame measures 107 x 130 x 28 mm, keeping the installed footprint compact while accommodating the full 1-module Verso assembly. It is a purpose-built accessory from 2N, an Axis company and one of the world’s leading IP intercom manufacturers, ensuring genuine compatibility and consistent build quality throughout the installation.
Key Capabilities
Surface Mount – No Cavity Required
This frame is engineered for direct wall-surface installation, eliminating the need to cut a recess into the wall. It is the correct mounting solution where flush installation into brickwork, concrete, or finished plasterboard is not practical or permitted.
Metal Construction in Nickel Finish
Manufactured from metal with a nickel surface finish, this frame is built to withstand regular contact at an entry point without showing wear. The nickel tone aligns with the premium aesthetic of the 2N IP Verso product line and suits modern commercial and residential facades.
Single-Module Compatibility
Sized specifically for 1-module 2N IP Verso configurations, this frame provides a precise fit for intercom setups with one functional module. It avoids the bulk of a multi-module frame where only a single-module layout is needed, keeping the entry point installation tidy and proportional.
Self-Contained Installation
No additional mounting accessories are required to complete a surface installation using this frame. The frame handles the full surface-mount requirement on its own, reducing the number of line items on an installation order and simplifying procurement for both single-site and multi-site projects.
Best For
- Solid Wall Entry Points: Where the wall substrate (concrete, brick, or block) makes recessing a flush mount impractical, this surface frame provides a fully finished install without structural modification.
- Retrofit Intercom Upgrades: Replacing a legacy intercom on an existing wall without disturbing finished surfaces makes this surface mount frame the practical choice over a flush-mount solution.
- Single-Module 2N IP Verso Deployments: Any installation using a 1-module Verso intercom that requires a surface mount finish rather than an in-wall recess.
Why Choose the 2N IP Verso 1-Module Surface Mount Frame
The 2N IP Verso 1-Module Surface Mount Frame in nickel is a genuine 2N accessory, manufactured to match the tolerances and finish of the Verso intercom system directly. Using a third-party or improvised surface mount solution with a precision-designed IP intercom introduces fit and finish risks that this frame eliminates entirely. At 107 x 130 x 28 mm, the footprint is compact enough to look considered rather than afterthought, and the metal construction at an entry point means it will not flex or degrade the way a plastic surround might under daily contact. For installers who regularly specify 2N IP Verso systems across apartment buildings, office entries, or gated access points, stocking this frame alongside the intercom unit avoids delays when flush installation is not possible on-site. The 2N IP Verso 1-Module Surface Mount Frame is available through Security Wholesalers as part of a full range of 2N intercom accessories and modules.
Buyer Tip: Confirm your wall construction before ordering. If the intercom is being installed on a surface where cabling exits from the wall rather than through it, this surface mount frame accommodates rear cable entry. If your wall allows for a full recess and you prefer the intercom to sit flush with the wall plane, a flush-mount frame would be the alternative to consider. The nickel finish is specific to this variant, so confirm the finish matches your Verso module selection before ordering.
Key Features & Technical Specifications
| Product Type | Surface Mount Frame – 1 Module |
| Compatible System | 2N IP Verso (1-module configuration) |
| Finish / Colour | Nickel |
| Material | Metal |
| Mount Type | Surface Mount / Wall Mount |
| Dimensions | 107 x 130 x 28 mm (4.21 x 5.12 x 1.10 in) |
| Package Weight | 0.915 lb (approx. 415 g) |
| Connection Method | Multi-Wire Digital Systems |
| Additional Accessories Required | None – frame is self-contained for surface installation |
| GTIN | 8595159503868 |
| Brand | 2N (an Axis company) |
| Product Name (Manufacturer) | 2N IP VERSO – 1M SURFACE FRAME |
Ideal Use Cases
Apartment Building Entry
Multi-residential buildings with solid concrete or masonry entry walls benefit from surface mounting where recessing is not viable. The compact 107 x 130 mm footprint keeps the intercom positioned cleanly at the entry without requiring structural work.
Commercial Office Entry
Single-module Verso deployments at office reception or secured entry doors where surface mounting keeps cabling managed behind the frame and the nickel metal finish aligns with a professional environment.
Retrofit Intercom Replacement
Upgrading from a legacy intercom system on an existing wall is simplified when surface mounting is used. The frame mounts to the existing wall surface without requiring the cavity left by an older unit to be patched and re-cut.
Gated Access and Perimeter Entry Points
Gate posts and perimeter walls at industrial or commercial sites are rarely built to accept flush-mount frames. The surface mount frame allows a 2N IP Verso to be installed neatly on these surfaces without modification to the post or wall.
Choosing the Right Model
- Choose this model if: You are installing a single-module 2N IP Verso intercom on a solid wall surface where a flush recess is not possible, and you require a nickel metal finish to match the Verso module.
- Choose a different model if: Your wall allows full recessing and you prefer the intercom to sit flush with the wall plane, in which case a flush-mount frame designed for the 2N IP Verso would be the appropriate choice. If your Verso configuration uses more than 1 module, a multi-module frame would be required instead.
FAQs
- Which intercom system is this frame designed for?
This surface mount frame is designed specifically for the 2N IP Verso intercom system in a 1-module configuration. It is a genuine 2N accessory and is manufactured to fit the Verso module dimensions precisely. It is not a universal intercom frame and should not be used with other intercom brands or non-Verso 2N products. - What is the difference between a surface mount frame and a flush mount frame?
A surface mount frame sits on the face of the wall, with the intercom body protruding outward from the wall surface. A flush mount frame requires a recess cut into the wall so the intercom sits level with the wall surface. This surface mount frame is the correct choice when cutting into the wall is not practical due to the wall material, building regulations, or the existing condition of the surface. - Do I need any additional accessories to complete the surface installation?
No. This frame is designed to be a self-contained surface mount solution for the 2N IP Verso 1-module intercom. No additional brackets, adapters, or spacers are required. The frame handles the full surface-mount installation on its own, which simplifies both ordering and on-site installation. - What are the dimensions of this frame and how much wall space does it occupy?
The frame measures 107 x 130 x 28 mm (4.21 x 5.12 x 1.10 in). The 28 mm depth indicates how far the assembly will protrude from the wall surface once installed. This compact footprint suits most standard entry door and gate post locations without appearing bulky or oversized. - Is this frame available through Security Wholesalers, and can it be ordered alongside 2N IP Verso modules?
Yes, this frame is part of the 2N intercom accessory range offered through Security Wholesalers. It can be ordered alongside compatible 2N IP Verso modules and other 2N accessories to consolidate your intercom installation procurement into a single order.
Cabling Considerations
- Cable Entry: The surface mount frame accommodates rear cable entry from the wall surface, allowing cabling to be routed through the wall behind the frame for a tidy finish. Surface conduit can also be used where in-wall cabling is not possible.
- Cable Type: Cabling requirements are determined by the 2N IP Verso intercom module installed in this frame. Cat5e or Cat6 is typically used for IP intercom installations. Refer to the 2N IP Verso module specifications for confirmed cabling requirements.
- Connection Method: This frame is listed as compatible with Multi-Wire Digital Systems, consistent with the 2N IP Verso platform. Confirm the specific wiring configuration with the intercom module datasheet before installation.
- Wiring Tips: Plan cable routing before fixing the frame to the wall. Surface mounting means the cable entry point will be visible if not properly recessed or covered by the frame footprint. Measure the frame dimensions (107 x 130 mm) against the wall area to confirm the cable exit point will be concealed under the frame before drilling.

















