Product Overview
For installers fitting a 2N IP Verso intercom system into a finished wall or plasterboard surface, the 2N IP Verso Flush Mount Wall Box for 3 Modules provides the correct recessed housing to achieve a clean, professional result. Designed specifically for 3-module IP Verso configurations, this plastic mounting box sits behind the wall surface and accommodates the required wall opening of 342.9 x 106.7 x 43.2 mm, providing a stable and correctly dimensioned recess for the intercom panel. Compatible with IP Verso, IP Verso 2.0, and LTE Verso systems, it is the manufacturer-specified solution for flush installations where a surface-mounted box is not appropriate or not preferred. The box is suited to both indoor and outdoor wall installations, making it applicable to building entrances, stairwells, and perimeter access points where a flush-mounted intercom panel is required.
Key Capabilities
3-Module Flush Configuration
Engineered to house exactly 3 IP Verso intercom modules in a flush wall application. This ensures the intercom panel sits level with the wall surface rather than projecting outward, delivering a tidy, integrated finish suited to commercial and residential entrance points.
Broad System Compatibility
Confirmed compatible with IP Verso, IP Verso 2.0, and LTE Verso systems. Installers working across different generations of 2N intercom deployments can use this box without compatibility concerns, reducing the need to stock multiple mounting variants.
Precise Wall Opening Dimensions
The confirmed wall cutout dimensions of 342.9 x 106.7 x 43.2 mm allow installers to plan and prepare wall openings accurately before the intercom modules arrive on site, reducing rework and ensuring the finished installation aligns correctly with the intercom panel frame.
Indoor and Outdoor Wall Use
Rated for both indoor and outdoor environmental use, this mounting box can be installed at building entrances, perimeter gates, and covered external walls. It supports IP Verso deployments in locations exposed to varying conditions while keeping the intercom flush and structurally secure within the wall substrate.
Best For
- New-Build and Fit-Out Projects: Wall cavities and plasterboard partitions in new constructions allow the box to be installed before plastering or finishing, resulting in a fully flush intercom panel at completion.
- Commercial Building Entrances: Multi-tenancy buildings and office entry points benefit from the neat flush profile this box enables, keeping the intercom panel integrated with the wall rather than adding visual bulk.
- 3-Module IP Verso Configurations: Any deployment requiring 3 IP Verso, IP Verso 2.0, or LTE Verso modules in a single panel location where surface mounting is not suitable or not preferred by the client or architect.
Why Choose the 2N IP Verso Flush Mount Wall Box (3 Module)
The 01286-001 is the manufacturer-specified flush mount solution for 3-module IP Verso intercom installations, designed by 2N to work precisely with the IP Verso, IP Verso 2.0, and LTE Verso product families. Using a third-party or generic back box risks misalignment with the intercom frame, incorrect depth, or inadequate support for the modules during and after installation. This box is built to the correct internal dimensions with a wall opening of 342.9 x 106.7 x 43.2 mm and a depth of 1.93 inches, ensuring the intercom sits flush without gaps or movement. For installers specifying a complete and compliant IP Verso installation, available at Security Wholesalers, using the matched mounting accessory eliminates fit uncertainty and keeps the finished result consistent with 2N’s intended installation standard.
Buyer Decision Tips
Buyer Tip: This box is specifically designed for flush mounting only and is not intended for surface installation. Before ordering, confirm that the installation wall has sufficient depth to accommodate the box dimensions (depth of 1.93 inches / approximately 49 mm) and that the wall substrate, whether brick, concrete, or plasterboard, can be cut and prepared to the required opening of 342.9 x 106.7 x 43.2 mm. If the wall cannot accommodate a recess of this depth, a surface-mount option should be considered instead.
Key Features & Technical Specifications
| Part Number | 01286-001 |
| Product Type | Flush mount wall installation box (mounting accessory) |
| Module Capacity | 3 modules |
| Mount Type | Flush mount (not suitable for surface installation) |
| Compatible Systems | 2N IP Verso, IP Verso 2.0, LTE Verso |
| Material | Plastic |
| Height | 15.00 inches (381 mm) |
| Depth | 1.93 inches (49 mm) |
| Wall Opening Width | 106.7 mm |
| Wall Opening Height | 342.9 mm |
| Wall Opening Depth Required | 43.2 mm |
| Environmental Suitability | Indoor and outdoor |
| Country of Origin | Czech Republic |
| UPC | 8595159504681 |
Ideal Use Cases
Multi-Tenancy Apartment Buildings
Apartment entry points requiring a 3-module IP Verso panel benefit from the flush mount profile, keeping the intercom integrated cleanly into the foyer or external entry wall without protruding hardware.
Commercial Office Entry Points
Office buildings and corporate campuses often specify flush-mounted intercom panels for aesthetic consistency. This box provides the correct recess depth and dimensions for a 3-module IP Verso installation at reception or main entry walls.
New Construction Projects
In new builds, this box can be installed in the wall cavity during construction, with cabling routed and the wall finished around it. The intercom modules are then fitted once the wall is complete, achieving a seamless result.
Covered External Perimeter Gates
Suitable for indoor and outdoor environments, this mounting box supports IP Verso deployments at covered perimeter access points such as gated car park entries or building side entrances where a wall recess is achievable.
Choosing the Right Model
- Choose this model if: You are installing a 3-module IP Verso, IP Verso 2.0, or LTE Verso intercom system and require a flush-mounted finish where the panel will sit recessed into the wall, and your wall substrate can accommodate the required opening depth of 43.2 mm.
- Choose a different model if: Your installation site does not allow wall recessing, such as a solid masonry wall without sufficient depth or a location where cutting is not feasible. In those cases, a surface-mount back box designed for the IP Verso system would be the appropriate alternative. Similarly, if your IP Verso configuration uses fewer or more than 3 modules, a mounting box sized for the correct module count should be selected.
FAQs
- What intercom systems is this flush mount wall box compatible with?
The 01286-001 is confirmed compatible with the 2N IP Verso, IP Verso 2.0, and LTE Verso intercom systems. It is designed specifically for 3-module configurations within those product families. It is not intended for use with other intercom brands or non-Verso 2N products. - Can this box be used for surface mounting on a wall?
No. The 01286-001 is a flush mount box only and is not designed for surface installation. It requires the wall to be cut to the specified opening dimensions of 342.9 x 106.7 x 43.2 mm so the box sits recessed within the wall substrate. If surface mounting is required, a different accessory designed for that purpose should be used. - What are the exact wall opening dimensions required for installation?
The wall opening must be 342.9 mm high, 106.7 mm wide, and 43.2 mm deep (approximately 1.93 inches deep). These are the confirmed dimensions for accommodating the 3-module flush mount box. Accurate preparation of the wall opening before installation is important to achieve a flush, gap-free finish. - Is this box suitable for outdoor installation?
Yes. The box is rated for indoor and outdoor environmental use. However, the IP/IK protection rating relevant to the actual intercom system applies to the IP Verso module itself, not to this mounting box. The box should be installed in a location consistent with the environmental rating of the intercom panel it supports. - Where can I purchase the 01286-001 and confirm it suits my IP Verso configuration?
The 2N IP Verso Flush Mount Wall Box for 3 Modules is part of the Security Wholesalers range. If you are unsure whether this 3-module box matches your planned IP Verso configuration, check the total number of modules in your intercom layout before ordering, and confirm the available wall depth at your installation location against the required 43.2 mm recess depth.
Cabling Considerations
- Cable Routing: Cable routing for the IP Verso modules should be planned before the flush mount box is set in the wall. Run CAT5e or CAT6 cabling through the wall cavity to the box location prior to wall finishing to avoid the need to surface-run cables after installation is complete.
- PoE Considerations: The 2N IP Verso intercom system is typically powered via PoE through the network cable. Ensure the cable run from the PoE switch or injector to the intercom location falls within the standard 100 m PoE distance limit for reliable power delivery and network performance.
- Wiring Tips: Label cables clearly at the wall box during rough-in so termination is straightforward when the IP Verso modules are fitted. Allow sufficient cable slack inside the box to reach the module connection points without tension once the panel is installed.

















