Product SKU: RG-ES207GS-PI-OD
Product Overview
The Ruijie Reyee RG-ES207GS-PI-OD is a 7-port outdoor Gigabit smart cloud-managed PoE switch designed for CCTV, parks, highways, solar-powered sites and remote network installations where conventional indoor switching equipment is unsuitable. It combines five 10/100/1000BASE-T Gigabit RJ45 ports with two 1GE SFP optical interfaces, while four copper ports provide IEEE 802.3af/at PoE output. The switch itself can be powered by 12 VDC or through PoE, PoE+ or PoE++, allowing flexible installation where dedicated mains cabling is difficult. Its maximum PoE output budget reaches 60 W with a 90 W PoE++ input. IP65 weather resistance, -30°C to 65°C operation, ±8 kV PoE surge protection, ERPS and cloud-based management make it particularly suitable for demanding outdoor surveillance networks.
Key Capabilities
Outdoor IP65 Construction
The enclosure is rated IP65 for dust and water-jet resistance, allowing the switch to be deployed in suitably installed outdoor CCTV and remote-network environments.
4 × Gigabit PoE+ Outputs
Four Gigabit RJ45 ports support IEEE 802.3af and IEEE 802.3at PoE output, allowing compatible cameras and other powered devices to receive network data and power over Ethernet.
PoE, PoE+ or PoE++ Input
The switch can itself be powered through IEEE 802.3af, 802.3at or 802.3bt PoE input, making it practical for remote sites where running dedicated AC power is difficult.
Dual 1GE SFP Uplinks
Two Gigabit SFP interfaces provide optical uplink flexibility and support ERPS-based ring-network designs for supported resilient network architectures.
PoE Watchdog & Camera Troubleshooting
CCTV-focused management functions help identify and recover unresponsive powered cameras and assist with remote troubleshooting in supported Ruijie Reyee deployments.
±8 kV PoE Surge Protection
Enhanced surge protection on PoE service ports helps protect outdoor network equipment against electrical disturbances commonly encountered in remote and exposed installations.
Best For
- Outdoor CCTV Networks: IP65 protection, PoE output and cloud management suit camera installations exposed to outdoor conditions.
- Solar-Powered Surveillance: 12 VDC input and PoE-powered operation provide flexibility for compatible solar and battery-based deployments.
- Parks & Public Areas: Wide-temperature operation and surge protection suit distributed outdoor cameras and network nodes.
- Roads & Highways: Dual SFP interfaces and ERPS support are useful where fibre links connect multiple outdoor network locations.
- Remote Camera Sites: PoE watchdog and cloud management can reduce the need for manual site visits when supported cameras stop responding.
Why Choose the RG-ES207GS-PI-OD
The RG-ES207GS-PI-OD is designed for surveillance sites where a conventional indoor PoE switch would require an additional enclosure, local power supply and separate fibre hardware. Its integrated outdoor housing, dual SFP interfaces, PoE input, PoE outputs and cloud management consolidate multiple installation functions into one compact device. Support for 12 VDC input also makes it attractive for solar-powered and remote deployments, while ERPS provides a pathway to resilient fibre-ring architectures. Available through Security Wholesalers, the RG-ES207GS-PI-OD is particularly useful where outdoor durability, flexible power input and fibre connectivity are more important than simply adding more indoor switch ports.
Buyer Decision Tips
Buyer Tip: The maximum 60 W PoE budget is only available when the switch receives a 90 W PoE++ input. Lower-powered PoE inputs reduce the available output budget, so calculate the connected camera load and upstream power source together before installation.
Buyer Tip: This model has two 1GE SFP optical ports, making it more suitable than the indoor RG-ES207GS-P where fibre-ring connectivity or outdoor pole mounting is required. Confirm compatible SFP modules separately for the required fibre type and distance.
Key Features & Technical Specifications
| Product Type | Outdoor Gigabit smart cloud-managed PoE switch. |
| Model | RG-ES207GS-PI-OD. |
| Network Interfaces | 7 total ports. |
| RJ45 Ports | 5 × 10/100/1000BASE-T Gigabit RJ45 ports. |
| SFP Ports | 2 × 1GE SFP optical ports. |
| PoE Output Ports | 4. |
| PoE Output Standard | IEEE 802.3af and IEEE 802.3at. |
| PoE Input Ports | 1. |
| PoE Input Standards | IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt. |
| Maximum PoE Budget | Up to 60 W with 90 W PoE++ input. |
| PoE Budget with 60 W PoE++ Input | 40 W. |
| PoE Budget with 30 W PoE+ Input | 19 W. |
| PoE Budget with 15.4 W PoE Input | 6 W. |
| PoE Power Pins | 1–2 positive, 3–6 negative. |
| DC Input | 12 VDC supported. |
| Switching Capacity | 14 Gbps. |
| Packet Forwarding Rate | Approximately 10.42 Mpps. |
| PoE Watchdog | Supported. |
| Port Isolation | Supported. |
| ERPS | Supported via the two SFP interfaces. |
| Cloud Management | Ruijie Reyee cloud management supported. |
| Camera Troubleshooting | Supported through compatible Reyee management functions. |
| Protection Rating | IP65. |
| PoE Surge Protection – Ports 1–4 | ±8 kV common mode. |
| Surge Protection – Port 5 | ±2 kV common mode. |
| ESD Protection | 8 kV air discharge and 6 kV contact discharge. |
| Cooling | Fanless natural cooling. |
| Mounting | Wall or pole mounting. |
| Enclosure Material | Plastic. |
| Operating Temperature | -30°C to 65°C. |
| Storage Temperature | -40°C to 70°C. |
| Operating Humidity | 10% to 90% RH, non-condensing. |
| Storage Humidity | 5% to 95% RH, non-condensing. |
| MTBF | 200,000 hours. |
| Dimensions | Approximately 258 × 200 × 62.8 mm. |
| Weight | Approximately 0.95 kg. |
| Warranty | 3 years. |
Ideal Use Cases
Outdoor CCTV Poles
Pole mounting, IP65 protection and PoE input/output make the switch useful for camera clusters installed around car parks, roads and remote perimeter locations.
Solar-Powered Camera Sites
12 VDC input and flexible PoE powering options allow the switch to fit supported solar and battery-powered surveillance designs.
Parks & Public Spaces
Outdoor construction and wide temperature tolerance support distributed network points where indoor switches would require additional protection.
Roadside & Highway Networks
Dual SFP interfaces, ERPS and strong surge protection suit fibre-linked outdoor surveillance locations.
Remote Commercial Sites
Cloud management and PoE watchdog functions help administrators monitor and recover compatible devices without visiting every location.
Choosing the Right Model
- Choose the RG-ES207GS-PI-OD if: You need four outdoor PoE outputs, dual Gigabit SFP ports, IP65 protection and the ability to power the switch through PoE or 12 VDC.
- Choose the indoor RG-ES207GS-P instead if: The switch will remain inside a protected cabinet and outdoor weather resistance, PoE input and dual SFP connectivity are unnecessary.
- Provide 90 W PoE++ input if: The project needs the full 60 W available PoE output budget.
- Check fibre modules separately if: The SFP ports will be used, as the correct transceiver depends on fibre type, wavelength and transmission distance.
FAQs
- What ports does the Ruijie Reyee RG-ES207GS-PI-OD provide?
The Ruijie Reyee RG-ES207GS-PI-OD provides five 10/100/1000BASE-T Gigabit RJ45 ports and two 1GE SFP optical ports, giving seven network interfaces in total. Four RJ45 ports provide PoE and PoE+ output, while one RJ45 port supports PoE input. The two SFP ports can be used for compatible fibre uplinks and support ERPS-based ring networking. - What is the PoE budget of the RG-ES207GS-PI-OD?
The available PoE output budget depends on how the switch itself is powered. With a 90 W PoE++ input, Ruijie specifies up to 60 W of PoE budget. With 60 W PoE++, the budget is 40 W; with 30 W PoE+, it is 19 W; and with 15.4 W PoE input, it is 6 W. Four ports support IEEE 802.3af/at PoE output. - Can the RG-ES207GS-PI-OD be powered by PoE or DC?
Yes. The RG-ES207GS-PI-OD supports PoE input using IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt, and it also supports 12 VDC input. This gives installers flexibility for outdoor CCTV, solar-powered and remote network deployments where running a dedicated mains power circuit to the switch may be difficult. - Is the RG-ES207GS-PI-OD suitable for outdoor installation?
Yes. Ruijie rates the RG-ES207GS-PI-OD to IP65 and specifies an operating temperature range from -30°C to 65°C. The switch is designed for wall or pole mounting and uses a fanless natural-cooling enclosure. For Security Wholesalers installations, cable glands, connectors, fibre modules and mounting should still be selected so the complete installation maintains the required environmental protection. - What CCTV management functions does the RG-ES207GS-PI-OD support?
The switch supports PoE watchdog, port isolation, camera troubleshooting and cloud-based management through the Ruijie Reyee ecosystem. PoE watchdog can help recover unresponsive powered cameras, while cloud management provides remote visibility and maintenance. Perpetual or uninterrupted PoE behaviour is also promoted for supported operating conditions, helping maintain power continuity to connected devices during switch restart scenarios. - What switching performance and protection does the RG-ES207GS-PI-OD provide?
The RG-ES207GS-PI-OD has a switching capacity of 14 Gbps and a packet forwarding rate of approximately 10.42 Mpps. Ruijie specifies ±8 kV common-mode surge protection on PoE service ports 1 to 4, ±2 kV on service port 5, and ESD protection of 8 kV air discharge and 6 kV contact discharge. It also supports ERPS through its two SFP ports.
Additional Information
























