Hikvision DS-1671ZJ-SDM9 Pendant Mount Bracket for Speed Dome Cameras

Product SKU: DS-1671ZJ-SDM9

Product Overview

The Hikvision DS-1671ZJ-SDM9 is a black in-ceiling mounting bracket designed for selected compatible Hikvision PTZ and speed dome cameras where a recessed ceiling installation is preferred over a projecting wall or pendant arrangement. The mount allows much of the camera assembly to sit within the ceiling cavity, helping create a lower-profile installation in suitable commercial and indoor environments. Constructed from steel and plastic with a surface spray treatment, the DS-1671ZJ-SDM9 measures approximately Ø233.1 × 138 mm and weighs around 850 g. It supports a maximum load of 10 kg and must be installed on a suitable flat supporting surface. Hikvision primarily specifies the mount for indoor conditions, so camera compatibility, ceiling clearance and structural support should all be confirmed before installation.

Key Capabilities

Best For

• Commercial Interiors: Suitable where a compatible PTZ camera needs a cleaner recessed appearance in offices, retail spaces or public buildings.
• Suspended or Accessible Ceiling Areas: Useful where sufficient ceiling-cavity clearance is available for the camera and mounting assembly.
• Speed Dome Installations: Designed for selected compatible Hikvision PTZ and speed dome models requiring an in-ceiling mount.
• Low-Profile Surveillance: Helps reduce the visual impact of the mounting hardware compared with a long pendant installation.

Why Choose the DS-1671ZJ-SDM9

The DS-1671ZJ-SDM9 is designed for installations where a compatible Hikvision PTZ or speed dome should sit neatly within the ceiling rather than hang below it. Its recessed design can provide a more integrated appearance in commercial interiors while still supporting camera assemblies up to the specified 10 kg maximum load. The black finish also helps the visible portion of the mount remain discreet around compatible camera housings. Available through Security Wholesalers, the DS-1671ZJ-SDM9 should be selected only after confirming the exact camera model, ceiling opening, cavity depth and supporting structure because it is an in-ceiling accessory rather than a universal pendant bracket.

Buyer Decision Tips

Key Features & Technical Specifications

Product Type	In-ceiling mounting bracket for compatible Hikvision PTZ and speed dome cameras.
Model	DS-1671ZJ-SDM9.
Mounting Type	Recessed in-ceiling mount.
Camera Application	Selected compatible Hikvision PTZ and speed dome cameras.
Appearance	Black.
Material	Steel and plastic.
Surface Treatment	Surface spray treatment.
Dimensions	Ø233.1 × 138 mm.
Internal Opening	Approximately Ø47.4 mm.
Weight	Approximately 850 g.
Maximum Load Capacity	10 kg.
Primary Installation Environment	Indoor conditions.
Mounting Surface	Install on a suitable flat supporting surface.
Outdoor Installation Note	Hikvision states that waterproof rubber is necessary if the mount is used in an outdoor application.
Structural Requirement	Supporting structure must carry at least three times the combined weight of the camera and mount.

Ideal Use Cases

Choosing the Right Model

• Choose this model if: Your compatible Hikvision PTZ or speed dome specifically supports the DS-1671ZJ-SDM9 and needs a recessed in-ceiling installation.
• Choose a pendant bracket if: The camera needs to hang below the ceiling rather than sit partly within the ceiling cavity.
• Check ceiling clearance if: Space above the finished ceiling is limited, because the 138 mm mount depth does not include all additional camera and cabling clearance.

FAQs

1. What is the Hikvision DS-1671ZJ-SDM9 used for?
   The Hikvision DS-1671ZJ-SDM9 is an in-ceiling mounting bracket for selected compatible Hikvision PTZ and speed dome cameras. It allows the camera to be recessed into a suitable flat ceiling rather than suspended from a pendant tube. The bracket is designed primarily for indoor conditions and should be matched to the exact camera model before installation.
2. Is the DS-1671ZJ-SDM9 a pendant mount or an in-ceiling mount?
   Hikvision documentation identifies the DS-1671ZJ-SDM9 as an in-ceiling mount, not a pendant mount. It is designed to recess a compatible PTZ or speed dome into a ceiling opening. Buyers needing a camera to hang below the ceiling should select a compatible pendant bracket instead of treating the DS-1671ZJ-SDM9 as a pendant accessory.
3. What are the dimensions and weight of the DS-1671ZJ-SDM9?
   The DS-1671ZJ-SDM9 measures approximately Ø233.1 mm × 138 mm and weighs about 850 g. The dimension drawing also shows an internal opening of approximately Ø47.4 mm. These figures apply to the mounting bracket itself, so ceiling clearance and the dimensions of the compatible camera should also be checked before installation.
4. What material is the DS-1671ZJ-SDM9 made from?
   The DS-1671ZJ-SDM9 is manufactured from steel and plastic with a surface spray treatment and is finished in black. This combination provides the structure needed for a recessed ceiling installation while keeping the visible mounting hardware relatively discreet around a compatible camera.
5. What is the maximum load capacity of the DS-1671ZJ-SDM9?
   The DS-1671ZJ-SDM9 has a maximum stated load capacity of 10 kg. Hikvision also specifies that the supporting surface must be capable of carrying at least three times the combined weight of the camera and mount. For Security Wholesalers installations, the ceiling structure and fixings should therefore be assessed for the full installed assembly.
6. Can the DS-1671ZJ-SDM9 be used outdoors?
   Hikvision lists the DS-1671ZJ-SDM9 as applying to indoor conditions. The datasheet also notes that waterproof rubber is necessary for outdoor application, but it does not provide an outdoor ingress-protection rating for the bracket. For that reason, outdoor use should only be considered where the complete camera and mounting arrangement is specifically validated for the environment.