Hikvision DS-1668ZJ-20-P Pendant Mount Bracket for PTZ Cameras

Product SKU: DS-1668ZJ-20-P

Product Overview

The Hikvision DS-1668ZJ-20-P is a 200 mm pendant mounting bracket designed for compatible Hikvision PanoVu camera installations where the camera needs to hang below a flat ceiling or overhead mounting surface. Manufactured from zinc-coated steel with a surface spray treatment, it provides a rigid mounting interface while keeping camera cabling routed through the pendant assembly. The bracket measures approximately Ø115 × 200 mm and weighs around 1.15 kg, with a maximum stated load capacity of 20 kg. A dedicated safety-rope hook helps make camera installation safer and more convenient, particularly when mounting larger PanoVu assemblies overhead. The DS-1668ZJ-20-P can also be used outdoors when the required waterproof rubber is fitted and the complete installation is sealed appropriately.

Key Capabilities

Best For

• PanoVu Camera Installations: Designed specifically for compatible Hikvision PanoVu cameras requiring pendant mounting.
• High Ceiling Installations: Useful where a camera needs to hang below the ceiling rather than mount directly against the overhead surface.
• Commercial and Infrastructure Sites: Suitable for supported multi-sensor camera installations in large indoor or outdoor surveillance environments.
• Horizontal Pole Assemblies: Hikvision documentation shows the mount used with compatible horizontal pole hardware in supported PanoVu installations.

Why Choose the DS-1668ZJ-20-P

The DS-1668ZJ-20-P is a purpose-built pendant bracket for compatible Hikvision PanoVu cameras rather than a generic PTZ mounting tube. Its 200 mm length provides useful separation from the mounting surface, while the 20 kg load rating and zinc-coated steel construction suit substantial multi-sensor camera assemblies. The safety-rope hook also improves practicality during overhead installation. Available through Security Wholesalers, this model is best selected where the exact PanoVu camera specifically supports the DS-1668ZJ-20-P and a longer pendant drop is preferred over the shorter DS-1668ZJ-P. Camera compatibility and structural support should always be confirmed before installation.

Buyer Decision Tips

Key Features & Technical Specifications

Product Type	Pendant mounting bracket for compatible Hikvision PanoVu cameras.
Model	DS-1668ZJ-20-P / DS-1668ZJ(20)-P.
Mounting Type	Pendant mount.
Camera Application	Compatible Hikvision PanoVu cameras.
Material	Steel.
Surface Treatment	Zinc coating with surface spray treatment.
Appearance	Platinum Gray.
Dimensions	Ø115 × 200 mm.
Weight	Approximately 1.15 kg.
Maximum Load Capacity	20 kg.
Safety Feature	Hook for camera safety rope.
Mounting Surface	Install on a flat surface.
Outdoor Installation	Waterproof rubber required for outdoor applications.
Structural Requirement	Supporting surface should carry at least three times the combined weight of the camera and mount.

Ideal Use Cases

Choosing the Right Model

• Choose this model if: Your compatible Hikvision PanoVu camera specifically supports the DS-1668ZJ-20-P and requires a 200 mm pendant mounting drop.
• Choose the shorter DS-1668ZJ-P if: A shorter pendant arrangement is sufficient and the exact camera supports that accessory.
• Add horizontal pole hardware if: The installation is being mounted from a horizontal pole rather than directly from a flat overhead surface.

FAQs

1. What is the Hikvision DS-1668ZJ-20-P used for?
   The Hikvision DS-1668ZJ-20-P is a 200 mm pendant mount designed for compatible Hikvision PanoVu camera installations. It allows the camera to hang below a flat mounting surface while providing a dedicated steel mounting interface. The bracket also includes a safety-rope hook to help secure the camera during installation and should be matched to the exact PanoVu model before purchase.
2. What are the dimensions and weight of the DS-1668ZJ-20-P?
   The DS-1668ZJ-20-P measures approximately Ø115 mm × 200 mm and weighs about 1.15 kg. These dimensions refer to the pendant mount itself, so additional clearance should be allowed for the compatible camera, cabling and fixing hardware when planning the complete installation.
3. What material is the DS-1668ZJ-20-P made from?
   The DS-1668ZJ-20-P is made from steel with a zinc coating and surface spray treatment. The published version is finished in Platinum Gray. This construction provides a rigid pendant mounting point for compatible PanoVu cameras and is intended for professional CCTV installations.
4. What is the maximum load capacity of the DS-1668ZJ-20-P?
   The DS-1668ZJ-20-P has a maximum stated load capacity of 20 kg. Hikvision also specifies that the supporting surface should be capable of carrying at least three times the combined weight of the camera and mount, so the ceiling or mounting structure and fixings should be assessed for the complete installed assembly.
5. Can the DS-1668ZJ-20-P be used outdoors?
   Yes. The DS-1668ZJ-20-P can be used outdoors when the required waterproof rubber is installed as part of the mounting arrangement. The bracket should be fixed to a flat surface, and the cable entry, sealing and supporting structure should also be suitable for the actual site conditions.
6. Does the DS-1668ZJ-20-P fit every Hikvision PTZ camera?
   No. The DS-1668ZJ-20-P is specifically described as a pendant mount for compatible Hikvision PanoVu cameras. It should not be assumed to fit every PTZ or speed dome model. For Security Wholesalers projects, the exact camera and mounting combination should be confirmed before purchase so the correct bracket is selected.