Product SKU: DS-1272ZJ-120-TR15
Product Overview
The Hikvision DS-1272ZJ-120-TR15 is a white wall-mount bracket designed for compatible Hikvision turret cameras in indoor and outdoor surveillance installations. Manufactured from aluminium alloy with a surface spray treatment, it provides a rigid mounting arm that positions the camera away from the wall while offering integrated cable outlet routing for a cleaner finished installation. The bracket measures 120 × 122 × 173 mm and weighs approximately 460 g, with a maximum stated load capacity of 3 kg. Hikvision specifies installation on a flat surface and requires waterproof rubber when the bracket is used outdoors. The supporting wall should also be capable of carrying at least three times the combined weight of the camera and mount, making correct substrate selection and fixing hardware an important part of installation planning.
Key Capabilities
Dedicated Turret Wall Mounting
The bracket provides a purpose-built wall-mount solution for compatible Hikvision turret cameras, positioning the camera away from the mounting surface for a clean and practical installation.
Indoor and Outdoor Use
Hikvision specifies the DS-1272ZJ-120-TR15 for both indoor and outdoor conditions, with waterproof rubber required when the bracket is installed externally.
Integrated Cable Outlet
Built-in cable outlet provision helps route camera cabling through the mounting assembly, supporting a neater installation than leaving cables exposed around the camera body.
Aluminium-Alloy Construction
The aluminium-alloy body with surface spray treatment provides a durable mounting structure while keeping bracket weight to approximately 460 g.
Best For
- Building Perimeters: Useful where compatible turret cameras need to project away from an exterior wall for a clearer mounting position.
- Retail and Commercial Sites: Provides a clean wall-mounted finish with internal cable routing for compatible Hikvision turret cameras.
- Warehouses and Loading Areas: Suitable for indoor or outdoor wall positions where the mounting surface is flat and structurally adequate.
- Replacement or Upgrade Installations: Useful when an existing compatible Hikvision turret camera needs the correct dedicated wall-mount bracket.
Why Choose the DS-1272ZJ-120-TR15
The DS-1272ZJ-120-TR15 is a straightforward mounting solution for compatible Hikvision turret cameras where a direct surface mount is not the preferred installation method. Its 173 mm projection provides useful separation from the wall, while the cable outlet helps keep wiring organised through the mounting assembly. The aluminium-alloy construction and suitability for both indoor and outdoor conditions make it practical across residential, commercial and industrial CCTV projects. Available through Security Wholesalers, this bracket should be selected only after confirming the exact camera model, mounting pattern and supporting wall construction, as not every Hikvision turret camera uses the same bracket interface.
Buyer Decision Tips
Buyer Tip: Check the camera model before ordering. The DS-1272ZJ-120-TR15 is intended for compatible Hikvision turret cameras, but bracket compatibility varies by housing and mounting pattern.
Buyer Tip: For outdoor use, waterproof rubber is required and the bracket must be installed on a flat surface. The wall should also be capable of supporting at least three times the combined weight of the camera and mount.
Key Features & Technical Specifications
| Product Type |
Wall-mount bracket for compatible turret cameras. |
| Model |
DS-1272ZJ-120-TR15. |
| Mounting Type |
Wall mount. |
| Application |
Compatible Hikvision turret camera installations. |
| Material |
Aluminium alloy with surface spray treatment. |
| Colour |
Hikvision White. |
| Dimensions |
120 × 122 × 173 mm. |
| Weight |
Approximately 460 g. |
| Maximum Load Capacity |
3 kg. |
| Installation Environment |
Indoor and outdoor conditions. |
| Cable Management |
Cable outlet provision included. |
| Mounting Surface |
Install on a flat surface. |
| Outdoor Installation |
Waterproof rubber required. |
| Wall Strength Requirement |
Wall should support at least three times the combined weight of the camera and mount. |
Ideal Use Cases
External Building Walls
Mount compatible turret cameras away from the wall while keeping camera cabling routed through the bracket assembly.
Retail Shopfronts
Provides a clean wall-mount option for compatible turret cameras monitoring entrances, footpaths and external retail areas.
Warehouse Walls
Suitable for positioning compatible turret cameras around loading areas, side access points and building perimeters.
Indoor Commercial Areas
Can also be used indoors where wall mounting provides a better camera position than direct ceiling or surface installation.
Choosing the Right Model
- Choose this model if: Your compatible Hikvision turret camera is approved for the DS-1272ZJ-120-TR15 and you need a dedicated indoor or outdoor wall mount.
- Choose a different bracket if: The camera uses another mounting pattern, requires pendant or pole mounting, or exceeds the bracket’s 3 kg maximum load capacity.
- Check the wall structure if: The bracket is being mounted to lightweight or non-structural material. Hikvision requires the wall to support at least three times the combined weight of the camera and bracket.
FAQs
- What is the Hikvision DS-1272ZJ-120-TR15 used for?
The DS-1272ZJ-120-TR15 is a wall-mount bracket designed for compatible Hikvision turret cameras. It allows a supported camera to project away from the wall rather than being mounted directly against the surface, while its cable outlet helps route camera cabling through the bracket. Camera compatibility should be checked against the exact Hikvision model before installation.
- Can the DS-1272ZJ-120-TR15 be used outdoors?
Yes. Hikvision specifies the DS-1272ZJ-120-TR15 for both indoor and outdoor conditions. For outdoor installation, waterproof rubber is required as part of the mounting arrangement. The bracket should also be installed on a suitable flat surface and the cable entry should be protected correctly for the site conditions.
- What is the maximum load capacity of the DS-1272ZJ-120-TR15?
The DS-1272ZJ-120-TR15 has a maximum stated load capacity of 3 kg. Hikvision also specifies that the supporting wall should be capable of carrying at least three times the combined weight of the camera and the mount. This makes substrate strength and fixing selection important parts of the installation.
- What are the dimensions of the DS-1272ZJ-120-TR15?
The DS-1272ZJ-120-TR15 measures 120 mm × 122 mm × 173 mm and weighs approximately 460 g. These dimensions refer to the bracket itself, not the complete camera installation. Allow additional space for the compatible turret camera, cabling and suitable wall fixings when planning the final mounting position.
- What material and colour is the DS-1272ZJ-120-TR15?
The DS-1272ZJ-120-TR15 is manufactured from aluminium alloy with a surface spray treatment and is finished in Hikvision White. The bracket is designed for compatible indoor and outdoor camera installations. For Security Wholesalers projects, confirm the exact camera model and mounting surface before finalising the bracket selection.
- Does the DS-1272ZJ-120-TR15 fit every Hikvision turret camera?
No. The DS-1272ZJ-120-TR15 is intended for compatible Hikvision turret cameras and should not be assumed to fit every turret model. Hikvision accessory compatibility varies by camera housing and mounting pattern, so the exact camera model should be checked before purchase rather than choosing the bracket only by camera shape or brand.
