Product SKU: AE-VC2521T-ITS-6MM
Product Overview
The Hikvision AE-VC2521T-ITS-6MM is a 2MP indoor DSM mobile analogue camera designed for driver-facing surveillance in compatible vehicle recording systems. Its 6 mm fixed lens provides a focused 52° horizontal field of view, making it suitable for A-pillar mounting where the driver’s face and upper body need to remain clearly framed rather than capturing the entire vehicle cabin. A 1/2.8-inch progressive scan CMOS sensor delivers 1920 × 1080 video, while integrated 940 nm infrared illumination provides up to 2 metres of close-range night coverage. The camera also includes a built-in microphone for audio capture through compatible onboard recording equipment. An HDTVI aviation-plug connection, 9 to 16 V DC operating range and IP5X dust protection complete a compact DSM camera designed specifically for protected interior vehicle installation.
Key Capabilities
Driver State Monitoring View
The focused 6 mm lens is designed for internal driver-facing use, helping the camera frame the driver area rather than producing the much wider view expected from a general cabin camera.
2MP Full HD Video
A 1/2.8-inch progressive scan CMOS sensor provides 1920 × 1080 output for compatible mobile surveillance systems, with 1080p at 30 fps used as the default frame rate.
940 nm Infrared Illumination
Built-in 940 nm IR provides up to 2 metres of close-range illumination and supports imaging at 0 lux with IR active, making it appropriate for monitoring the driver in a dark vehicle cabin.
Built-in Microphone
Integrated audio capture allows compatible onboard recording systems to record sound alongside the camera feed without requiring a separate microphone at the driver position.
Adjustable A-Pillar Mounting
The lens cone can be adjusted vertically and horizontally to help the installer aim the fixed 6 mm view correctly after positioning the camera around the vehicle’s A-pillar area.
HDTVI Aviation Connection
Video, audio, power and ground are carried through the specified aviation-plug interface, supporting integration with compatible Hikvision mobile recorders and vehicle cabling.
Best For
- Driver State Monitoring: Designed for close driver-facing video where compatible recorder-side DSM or driver behaviour analysis functions are used.
- A-Pillar Installation: The adjustable lens cone and focused 6 mm view suit protected interior mounting near the driver.
- Fleet Vehicles: Suitable for compatible trucks, buses, commercial vehicles and other fleet systems requiring driver-facing video and audio.
- Night-Time Cabin Monitoring: Built-in 940 nm infrared illumination provides close-range coverage in dark vehicle interiors.
- Audio-Enabled Driver Recording: The built-in microphone allows compatible mobile recorders to capture audio alongside the camera feed.
Why Choose the AE-VC2521T-ITS-6MM
The AE-VC2521T-ITS-6MM is purpose-built for driver-facing monitoring rather than general cabin surveillance. Its 6 mm lens provides a more focused field of view than a typical wide-angle vehicle camera, helping the installer concentrate on the driver area from an A-pillar position. Close-range 940 nm IR supports monitoring in darkness, while the built-in microphone adds audio capture without requiring another device inside the cabin. Available through Security Wholesalers, this model is a strong choice where compatible Hikvision mobile recording equipment requires a compact 1080p DSM camera with a dedicated aviation-plug connection. Buyers should confirm recorder compatibility, pin sequence and mounting position before installation rather than assuming every mobile analogue recorder uses the same interface.
Buyer Decision Tips
Buyer Tip: The 6 mm lens provides a relatively focused 52° horizontal field of view. Position and adjust the camera so the driver remains properly framed; this model is not intended to provide an ultra-wide view of the entire cabin.
Buyer Tip: The camera uses an aviation-plug interface with a defined pin sequence for video, audio, power and ground. Check the mobile recorder and any extension cable together before installation, as similar-looking onboard connectors can use different pin assignments.
Key Features & Technical Specifications
| Resolution |
2MP, 1920 × 1080. |
| Camera Type |
Indoor DSM mobile analogue vehicle camera. |
| Image Sensor |
1/2.8-inch progressive scan CMOS. |
| Lens |
6 mm fixed lens. |
| Lens Mount |
M12. |
| Horizontal Field of View |
52° ±3°. |
| Vertical Field of View |
29° ±3°. |
| Diagonal Field of View |
61° ±3°. |
| Angle Adjustment |
Lens cone: up -72°, down 36°, left -63°, right 63°. |
| Minimum Illumination |
0 lux with IR. |
| Infrared Wavelength |
940 nm. |
| Infrared Range |
Up to 2 metres. |
| Day & Night |
IR normally open; image normally black and white. |
| Frame Rate |
1080p at 30 fps by default; 1080p at 25 fps configurable. |
| Built-in Microphone |
Supported. |
| Built-in Speaker |
Not supported. |
| Signal-to-Noise Ratio |
42 dB. |
| Video Output |
1-way coaxial HD output conforming to HDTVI. |
| Interface |
1 Vpp composite output through aviation plug. |
| Pin Sequence |
B sequence: 1 video, 2 audio, 3 power, 4 ground. |
| Protection Rating |
IP5X. |
| Power Supply |
9 to 16 V DC. |
| Power Consumption |
Maximum 2 W. |
| Operating Conditions |
-40°C to 75°C, 90% or less non-condensing humidity. |
| Cable Length |
2500 mm ±50 mm. |
| Dimensions |
84 × 45 × 74.2 mm. |
| Weight |
Approximately 128 g ±5%. |
Ideal Use Cases
Truck Driver Monitoring
The focused 6 mm view can be positioned toward the driver for compatible fleet systems using DSM or driver behaviour analysis functions.
Bus and Coach Cabins
Suitable for protected driver-facing positions where Full HD video, close-range IR and audio capture are required.
Commercial Fleet Vehicles
Useful for compatible mobile surveillance systems where driver activity needs to be recorded alongside other onboard camera channels.
A-Pillar Mounting
The adjustable lens cone allows the camera to be aimed from an A-pillar location without requiring a very wide lens.
Night-Time Driver Recording
940 nm IR provides short-range illumination up to 2 metres for driver monitoring when the vehicle cabin is dark.
Choosing the Right Model
- Choose this model if: You need a 2MP internal DSM camera with a focused 6 mm field of view, built-in microphone, 2 metre IR and an HDTVI aviation-plug connection.
- Choose a wider cabin camera if: The objective is to monitor several passengers or most of the vehicle interior rather than concentrating on the driver.
- Choose an outdoor-rated model if: The camera will be mounted outside the vehicle. The AE-VC2521T-ITS-6MM is rated IP5X and is intended for protected indoor vehicle installation.
- Confirm recorder compatibility if: DSM or driver behaviour analysis functions are required, because those analytics depend on the capabilities and configuration of the compatible onboard recording system.
FAQs
- Is the Hikvision AE-VC2521T-ITS-6MM designed for driver state monitoring?
Yes. The AE-VC2521T-ITS-6MM is designed as an internal DSM camera for compatible vehicle surveillance systems. Its 6 mm lens gives a relatively focused 52° horizontal view, which suits driver-facing placement better than an ultra-wide cabin camera. Hikvision also positions the model for use with compatible recorder-side driver behaviour analysis functions, so recorder compatibility should be confirmed as part of the system design.
- What resolution and frame rate does the AE-VC2521T-ITS-6MM provide?
The AE-VC2521T-ITS-6MM uses a 1/2.8-inch progressive scan CMOS sensor and provides 1920 × 1080 video. Its default output is 1080p at 30 fps, with 1080p at 25 fps also configurable. This makes it suitable for compatible mobile surveillance systems that need Full HD driver-facing video rather than lower-resolution cabin monitoring.
- What field of view does the 6 mm lens provide?
The 6 mm fixed lens provides an approximately 52° horizontal, 29° vertical and 61° diagonal field of view. This is a comparatively focused view intended to frame the driver area rather than the entire cabin. Correct A-pillar positioning and lens-cone adjustment are important so the driver’s face and upper body remain within the intended monitoring area.
- Does the AE-VC2521T-ITS-6MM have infrared night vision?
Yes. The camera uses 940 nm infrared illumination with a stated supplement-light range of up to 2 metres and can operate at 0 lux with IR active. The image is normally black and white in this mode. The short-range IR is appropriate for close driver-facing use rather than illuminating a large passenger cabin or exterior vehicle scene.
- Does the AE-VC2521T-ITS-6MM have a built-in microphone?
Yes. The AE-VC2521T-ITS-6MM includes a built-in microphone, allowing compatible onboard systems to capture audio alongside video. It does not include a built-in speaker, so it should not be described as a two-way-audio camera. For systems supplied through Security Wholesalers, confirm that the connected recorder and cabling support the camera’s audio channel if audio recording is required.
- How is the AE-VC2521T-ITS-6MM connected to a mobile recorder?
The camera provides one coaxial HD output conforming to HDTVI through an aviation plug. The listed B pin sequence is pin 1 video, pin 2 audio, pin 3 power and pin 4 ground. Because onboard connectors can use different pin assignments, the recorder, extension cable and camera should be checked together before installation rather than matched by connector appearance alone.
- Is the AE-VC2521T-ITS-6MM suitable for exterior vehicle mounting?
No. This model is intended for indoor vehicle use and carries an IP5X dust-protection rating rather than an exterior waterproof rating. It is better suited to protected cabin locations such as an A-pillar installation. For exterior vehicle surveillance, choose a camera specifically rated for outdoor exposure and the environmental conditions of the mounting location.
- What should I check before choosing the AE-VC2521T-ITS-6MM?
Choose the AE-VC2521T-ITS-6MM when you need a 2MP internal DSM camera with a focused 6 mm view, 2 metre 940 nm IR, built-in microphone and an aviation-plug HDTVI connection. Before purchase, confirm the compatible mobile recorder, pin sequence, available 9 to 16 V DC supply and intended A-pillar mounting position so the driver is framed correctly.
Additional Information
