Hikvision AE-MC0708-5.5 5.5m Dashcam & Onboard Camera Extension Cable with BM4 Male to Female Connectors IP5X 30V 1A

Product SKU: AE-MC0708-5.5

Product Overview

The Hikvision AE-MC0708-5.5 is a 5.5 metre extension cable designed for compatible Hikvision dashcam and onboard analogue camera installations using BM4 connections. It provides additional cable reach between compatible vehicle-mounted camera equipment, using a BM4 male input connector and BM4 female output connector to maintain the required connection format. The cable is rated at 30 V with a maximum current of 1 A and uses PVC insulation with a tinned copper conductor. Its IP5X dust-protection rating and -40°C to 105°C operating temperature range make it suitable for demanding onboard environments when correctly routed and protected. This accessory is best chosen when the existing installation requires an additional 5.5 metres of cable and the connected equipment is confirmed to use the matching BM4 interface.

Key Capabilities

Best For

• Dashcam Installations: Useful when compatible Hikvision dashcam equipment requires additional cable length between installation points.
• Onboard Analogue Cameras: Designed for compatible vehicle-mounted analogue camera connections using the BM4 interface.
• Larger Vehicles: The 5.5 metre length helps when equipment needs to be routed across longer vehicle interiors.
• Protected Vehicle Cable Routing: Suitable where the installer needs extra length to route the cable away from moving components, sharp edges and unsuitable heat sources.

Why Choose the AE-MC0708-5.5

The AE-MC0708-5.5 is a purpose-specific extension accessory rather than a generic replacement cable. Its main advantage is that it provides an additional 5.5 metres while retaining the BM4 male-to-female connection required by compatible onboard analogue camera installations. The broad stated working temperature range and IP5X protection are also relevant in vehicle environments where cabling can be exposed to greater temperature variation and dust than a typical indoor installation. Available through Security Wholesalers, the AE-MC0708-5.5 is best selected after confirming the exact connector type and electrical requirements of the equipment being extended. Buyers should not assume that every Hikvision dashcam or onboard camera uses the same connector.

Buyer Decision Tips

Key Features & Technical Specifications

Product Type	Onboard analogue camera extension cable.
Model	AE-MC0708-5.5.
Cable Length	5.5 metres.
Input Interface	BM4 male.
Output Interface	BM4 female.
Nominal Voltage	30 V.
Rated Current	≤ 1 A.
Protection Rating	IP5X.
Working Temperature	-40°C to 105°C.
Insulation	PVC.
Conductor	Tinned copper.
Application	Extension cable for compatible analogue onboard camera connections using BM4 male-to-female interfaces.
Specified Standards	UL20789, IPC620-3 and QC/T 29106-2014.

Ideal Use Cases

Choosing the Right Model

• Choose this model if: Your compatible Hikvision onboard camera or dashcam installation uses BM4 connections and requires an additional 5.5 metres of cable.
• Choose a different cable if: Your equipment uses a different connector type, requires a different cable length, or operates outside the stated 30 V and 1 A cable ratings.

FAQs

1. Is the Hikvision AE-MC0708-5.5 suitable for extending an onboard camera connection?
   Yes. The Hikvision AE-MC0708-5.5 is designed as an extension cable for compatible Hikvision dashcam and onboard analogue camera installations using the specified BM4 connection. Its 5.5 metre length provides additional reach between compatible components. Before installation, confirm that the equipment at both ends uses the required BM4 male and female interface rather than assuming compatibility from the Hikvision brand alone.
2. What connectors are fitted to the AE-MC0708-5.5?
   The AE-MC0708-5.5 uses a BM4 male input connector and BM4 female output connector. This male-to-female arrangement is intended to extend an existing compatible onboard analogue camera connection without changing the connector format. Because this is a specialised vehicle-camera cable, the connector type should be checked against the exact camera and recorder or dashcam equipment before purchase.
3. How long is the Hikvision AE-MC0708-5.5 extension cable?
   The AE-MC0708-5.5 is 5.5 metres long. That additional length is useful where the standard cable route does not comfortably reach between compatible onboard camera equipment, particularly in larger vehicles or installations where the cable must follow a protected routing path. Plan the cable route before installation so the extension can be secured away from sharp edges, moving components and concentrated heat sources.
4. What are the electrical ratings of the AE-MC0708-5.5?
   The Hikvision AE-MC0708-5.5 has a nominal voltage rating of 30 V and a rated current of up to 1 A. These figures describe the cable’s stated electrical limits and should be matched to the intended compatible equipment. When selecting the cable through Security Wholesalers, confirm the connected devices and BM4 interface are suitable for these ratings before installation.
5. Is the AE-MC0708-5.5 dust resistant?
   Yes. The AE-MC0708-5.5 carries an IP5X dust-protection rating. This indicates protection against dust ingress appropriate to the stated rating, which is useful for vehicle and onboard installations where the cable may be routed through less controlled spaces. The rating should not be interpreted as a waterproof rating, so installation should still protect the connection from unsuitable moisture exposure.
6. What temperature range is the AE-MC0708-5.5 designed to operate in?
   The AE-MC0708-5.5 has a stated working temperature range of -40°C to 105°C. This broad operating range suits the demanding temperature variation that can occur in vehicle installations. Even so, good cable routing remains important: avoid direct contact with sharp edges, moving parts and concentrated heat sources that could damage the cable or place unnecessary stress on the connectors.