Product SKU: DS-1704ZJ-Y-AC
Product Overview
The Hikvision DS-1704ZJ-Y-AC is a silver moon grey wall mounting bracket designed for compatible Hikvision explosion-proof bullet cameras used in demanding surveillance environments. Manufactured from SUS316L stainless steel with an anti-corrosion sprayed surface treatment, it provides a robust mounting platform where conventional CCTV brackets may not offer the required material specification. The bracket supports adjustable pan and tilt from -45° to 45°, allowing the installed camera angle to be refined after mounting, while an integrated cable-hole design assists with cleaner cable routing. Measuring approximately 140 × 200 × 278 mm and weighing around 2.158 kg, the bracket supports camera loads up to 8 kg. Hikvision also specifies outdoor installation provisions, including the use of waterproof rubber, making it suitable for properly engineered indoor and outdoor explosion-proof camera installations.
Key Capabilities
SUS316L Stainless Steel Construction
The bracket is manufactured from 316L stainless steel, providing a purpose-designed mounting solution for compatible explosion-proof and anti-corrosion camera installations where material durability is an important part of the overall surveillance design.
Anti-Corrosion Surface Treatment
An anti-corrosion sprayed surface treatment complements the 316L stainless-steel construction and gives the bracket its silver moon grey appearance, making it suitable for compatible camera installations in more demanding environments.
Adjustable Pan and Tilt
The wall mount provides pan adjustment from -45° to 45° and tilt adjustment from -45° to 45°. This allows the camera viewpoint to be refined after the bracket is secured rather than relying entirely on the original wall mounting angle.
8 kg Maximum Load Capacity
Hikvision specifies a maximum load capacity of 8 kg, allowing the bracket to support substantial compatible explosion-proof bullet cameras when the wall, fixings and complete mounting assembly are engineered to the required structural standard.
Integrated Cable Routing
A dedicated cable-hole design helps route camera cabling through the mounting assembly for a cleaner installation. Correct cable sealing remains particularly important for outdoor, industrial or corrosive environments.
Best For
- Industrial surveillance: Suitable for compatible explosion-proof bullet cameras used around demanding industrial facilities.
- Corrosive environments: 316L stainless steel and anti-corrosion surface treatment provide a more appropriate mounting material for harsh locations.
- Outdoor camera installations: Supports properly waterproofed wall mounting where compatible explosion-proof cameras are exposed to outdoor conditions.
- Adjustable viewing positions: ±45° pan and tilt adjustment assists with accurate camera alignment after the bracket is fixed to the wall.
- Heavy compatible camera assemblies: The 8 kg maximum load capacity supports substantial explosion-proof bullet camera installations.
Why Choose the DS-1704ZJ-Y-AC
The DS-1704ZJ-Y-AC is designed for projects where the camera mount must match the demanding construction requirements of a compatible explosion-proof bullet camera. Its SUS316L stainless-steel body and anti-corrosion sprayed finish provide a more robust mounting platform than a standard CCTV wall bracket, while ±45° pan and tilt adjustment gives installers useful control over the final viewing direction. The 8 kg load rating also accommodates substantial compatible camera assemblies when the supporting wall is correctly engineered. Available through Security Wholesalers, this bracket is particularly relevant to industrial and outdoor surveillance projects where structural strength, corrosion resistance, cable management and precise camera positioning need to be addressed as part of the complete mounting system.
Buyer Decision Tips
Buyer Tip: Confirm the exact explosion-proof bullet camera before ordering. The DS-1704ZJ-Y-AC is a specialised mounting accessory, and similar Hikvision explosion-proof camera families can use different brackets or mounting components.
Buyer Tip: Hikvision requires the supporting wall to carry at least eight times the combined weight of the camera and mount. The 8 kg bracket load rating does not replace this structural requirement, and outdoor installations also require the specified waterproof rubber and appropriate cable sealing.
Key Features & Technical Specifications
| Product |
Wall mount for compatible Hikvision explosion-proof bullet cameras. |
| Model |
DS-1704ZJ-Y-AC(OS). |
| Mount Type |
Wall mount. |
| Appearance |
Silver moon grey. |
| Material |
SUS316L stainless steel. |
| Surface Treatment |
Anti-corrosion sprayed surface treatment. |
| Pan Adjustment |
-45° to 45°. |
| Tilt Adjustment |
-45° to 45°. |
| Dimensions |
140 × 200 × 278 mm. |
| Weight |
Approximately 2.158 kg. |
| Maximum Load Capacity |
8 kg. |
| Cable Routing |
Integrated cable-hole design. |
| Mounting Surface |
Must be installed on a suitable flat wall surface. |
| Structural Requirement |
Wall must support at least eight times the combined weight of the camera and mount. |
| Outdoor Installation |
Waterproof rubber required for outdoor applications. |
| Compatibility |
Select compatible Hikvision explosion-proof bullet cameras. |
Ideal Use Cases
Oil and Gas Facilities
Provide a dedicated wall-mounting platform for compatible explosion-proof cameras used in properly designed industrial surveillance systems.
Chemical Processing Sites
316L stainless steel and anti-corrosion treatment suit compatible camera installations where harsh environmental conditions need to be considered.
Industrial Outdoor Areas
Use with correct waterproofing where compatible explosion-proof bullet cameras need secure wall mounting in exposed locations.
Marine or Corrosive Locations
The SUS316L construction makes the bracket relevant where the mounting hardware requires stronger corrosion-resistant material than a conventional CCTV bracket.
Heavy Bullet Camera Installations
An 8 kg load capacity provides support for substantial compatible explosion-proof camera assemblies when the wall meets Hikvision’s structural requirements.
Choosing the Right Model
- Choose the DS-1704ZJ-Y-AC if: You need a silver moon grey SUS316L wall bracket with anti-corrosion treatment for a compatible Hikvision explosion-proof bullet camera.
- Choose the natural stainless-steel version if: The project specifies an unpainted or natural stainless-steel finish rather than the silver moon grey anti-corrosion coated version.
- Choose another accessory if: The selected camera requires pendant, pole or terminal-box mounting instead of direct wall mounting.
FAQs
- What is the Hikvision DS-1704ZJ-Y-AC used for?
The Hikvision DS-1704ZJ-Y-AC is a wall mounting bracket for compatible Hikvision explosion-proof bullet cameras. It provides an adjustable mounting platform that allows the camera position to be refined after installation. The bracket is intended for projects where a purpose-built stainless-steel wall mount is required rather than a standard CCTV bracket, particularly around demanding industrial and outdoor surveillance environments.
- What material is the DS-1704ZJ-Y-AC made from?
The DS-1704ZJ-Y-AC is manufactured from SUS316L stainless steel and uses an anti-corrosion surface spray treatment. Hikvision specifies the appearance as silver moon grey. The 316L stainless-steel construction makes the bracket appropriate for compatible explosion-proof and anti-corrosion camera installations where stronger resistance to demanding environmental conditions is required.
- How adjustable is the DS-1704ZJ-Y-AC wall mount?
The bracket provides adjustable tilt from -45 degrees to 45 degrees and adjustable pan from -45 degrees to 45 degrees. This gives installers useful flexibility when aiming a compatible explosion-proof bullet camera after the wall mount has been secured. Final camera positioning should still account for the camera model, surrounding clearances, cable routing and the surveillance area that needs to remain visible.
- What are the dimensions and weight of the DS-1704ZJ-Y-AC?
The DS-1704ZJ-Y-AC measures approximately 140 mm × 200 mm × 278 mm and weighs about 2.158 kg before the camera is installed. These dimensions are important when checking wall space, camera clearance and cable routing. The wall must also be suitable for the completed camera and mount assembly rather than being assessed only against the bracket weight.
- How much weight can the DS-1704ZJ-Y-AC support?
Hikvision specifies a maximum load capacity of 8 kg for the DS-1704ZJ-Y-AC. The supporting wall must also be capable of carrying at least eight times the combined weight of the camera and the mount. This is a significantly higher structural safety requirement than simply staying below the bracket’s own load rating, so wall construction and fixings should be confirmed before installation.
- Can the DS-1704ZJ-Y-AC be used outdoors?
Yes. Hikvision documentation includes outdoor installation guidance for the DS-1704ZJ-Y-AC and states that waterproof rubber is required for outdoor applications. The wall surface, mounting points and cable routing should also be sealed correctly. The bracket’s 316L stainless-steel construction and anti-corrosion surface treatment support demanding installations, but the complete mounting assembly still needs to be installed correctly for the site conditions.
- Does the DS-1704ZJ-Y-AC include cable routing?
Yes. Hikvision specifies a cable-hole design that facilitates cable routing through the wall-mount assembly. This helps installers manage the camera cable more cleanly and reduces the need to leave wiring exposed around the outside of the bracket. Cable sealing and the installation path should still be planned carefully, particularly for outdoor or corrosive environments.
- Who should choose the Hikvision DS-1704ZJ-Y-AC?
Choose the DS-1704ZJ-Y-AC when a compatible Hikvision explosion-proof bullet camera needs a 316L stainless-steel wall mount with adjustable pan and tilt, an 8 kg load capacity and anti-corrosion surface treatment. When selecting it through Security Wholesalers, confirm the exact camera model, total mounted weight, wall strength, outdoor sealing requirements and required viewing angle before installation so the complete mounting arrangement is correctly matched.
Additional Information
Hikvision DS-1704ZJ-Y-AC Wall Mount Datasheet
