Hikvision DS-1271ZJ-110-BLK Black Pendant Mount Bracket for Dome Cameras 110mm Diameter

Product SKU: DS-1271ZJ-110-BLK

Product Overview

The Hikvision DS-1271ZJ-110-BLK is a black pendant mounting bracket designed for compatible Hikvision dome cameras that use the 110 mm mounting interface. Manufactured from aluminium alloy with a sprayed surface treatment, it provides a rigid 500 mm pendant drop for installations where the camera needs to sit below a ceiling, soffit or other suitable flat mounting surface. Internal cable routing allows camera cabling to pass through the bracket for a cleaner installation, while the black finish suits compatible black Hikvision camera models. The bracket measures approximately Ø110 mm × 500 mm × Ø150 mm, weighs around 1.27 kg and supports a maximum load of 4.5 kg. Hikvision specifies it for both indoor and outdoor use, with waterproof rubber required when used outdoors.

Key Capabilities

Best For

• High ceilings: Lowers a compatible dome camera by 500 mm to achieve a more practical surveillance height.
• Commercial interiors: Provides a clean pendant installation where dome cameras need to sit below ceiling structures.
• Covered outdoor areas: Suitable for outdoor conditions when the installation is correctly sealed using the required waterproofing components.
• Black camera installations: Matches compatible black Hikvision dome cameras and surrounding architectural finishes.

Why Choose the DS-1271ZJ-110-BLK

The DS-1271ZJ-110-BLK is the practical choice when a compatible Hikvision dome camera needs to be suspended below the mounting surface rather than fitted directly to the ceiling. Its 500 mm pendant length provides additional positioning flexibility, while internal cable routing keeps the visible installation cleaner and helps protect the camera cabling. Aluminium alloy construction, a 4.5 kg load rating and suitability for both indoor and outdoor environments make it useful across a range of commercial and security projects. Available through Security Wholesalers, this black version is particularly suitable where the camera and surrounding installation use a dark finish and the mounting arrangement needs to remain visually consistent.

Buyer Decision Tips

Key Features & Technical Specifications

Product	Hikvision black pendant mount for compatible dome cameras.
Model	DS-1271ZJ-110(Black).
Mount Type	Pendant mount.
Colour	Black.
Material	Aluminium alloy with sprayed surface treatment.
Camera Interface Diameter	Ø110 mm.
Pendant Length	500 mm.
Ceiling Plate Diameter	Ø150 mm.
Overall Dimensions	Ø110 mm × 500 mm × Ø150 mm.
Weight	Approximately 1.27 kg.
Maximum Load Capacity	4.5 kg.
Cable Routing	Internal cable-routing design.
Installation Environment	Indoor and outdoor use.
Outdoor Requirement	Waterproof rubber is required for outdoor installation.
Mounting Surface	Must be installed on a suitable flat surface.
Structural Requirement	Supporting surface must carry at least three times the combined weight of the camera and bracket.
Compatibility	Select Hikvision dome cameras using the compatible 110 mm pendant interface.

Ideal Use Cases

Choosing the Right Model

• Choose the DS-1271ZJ-110-BLK if: You need a black 500 mm pendant mount for a compatible Hikvision dome camera using the 110 mm interface.
• Choose another diameter if: Your camera requires a 120 mm, 130 mm, 140 mm or other Hikvision mounting interface instead of 110 mm.
• Choose a wall mount if: The camera needs to extend horizontally from a wall rather than hang vertically from a ceiling or overhead surface.

FAQs

1. What is the Hikvision DS-1271ZJ-110 Black used for?
   The Hikvision DS-1271ZJ-110 Black is a pendant mounting bracket for compatible Hikvision dome cameras. It suspends the camera below the mounting surface using a 500 mm pendant section, which can be useful where a dome needs to be positioned lower than the ceiling or where the installation requires a dedicated pendant format rather than direct surface mounting.
2. What cameras are compatible with the DS-1271ZJ-110 Black pendant mount?
   The DS-1271ZJ-110 Black is intended for select Hikvision dome cameras that use the compatible 110 mm pendant interface. Compatibility should be confirmed against the exact camera model before ordering, because physical appearance alone does not guarantee a correct mounting interface. Matching the camera and bracket through Security Wholesalers before installation helps avoid ordering the wrong bracket for a similar-looking dome.
3. What are the dimensions of the DS-1271ZJ-110 Black?
   The DS-1271ZJ-110 Black measures approximately 110 mm at the camera interface, 500 mm in pendant length and 150 mm at the ceiling plate. The bracket weighs approximately 1.27 kg. These dimensions should be checked against the available ceiling space, installation height and the intended camera position before drilling or mounting.
4. How much weight can the DS-1271ZJ-110 Black support?
   The DS-1271ZJ-110 Black has a maximum specified load capacity of 4.5 kg. The supporting surface must also be capable of carrying at least three times the combined weight of the camera and the mount. This requirement should be considered when fixing the bracket to ceilings, soffits or structural surfaces.
5. Can the DS-1271ZJ-110 Black be used outdoors?
   Yes. Hikvision specifies the bracket for both indoor and outdoor conditions. For outdoor use, waterproof rubber is required as part of the installation, and the mounting surface, fixings and cable entry should be sealed correctly. The bracket itself is aluminium alloy with a sprayed surface treatment and internal cable routing.
6. Does the DS-1271ZJ-110 Black hide the camera cable?
   Yes. The bracket has an internal cable-routing design, allowing the camera cable to pass through the pendant assembly rather than being left exposed along the outside of the mount. This helps create a cleaner installation and can provide better physical protection for the cable when the bracket is installed correctly.
7. What material is the DS-1271ZJ-110 Black made from?
   The DS-1271ZJ-110 Black is made from aluminium alloy with a black sprayed surface treatment. This provides a rigid mounting structure while keeping the bracket relatively manageable at approximately 1.27 kg. The black finish is intended to match compatible black Hikvision camera installations.
8. Does the DS-1271ZJ-110 Black need a flat mounting surface?
   Yes. Hikvision specifies that the pendant mount should be installed on a flat surface. The supporting structure must also be strong enough for at least three times the total weight of the camera and bracket. If the available surface is unsuitable, the mounting arrangement should be corrected rather than relying on the bracket to compensate for an uneven or weak substrate.