Product SKU: DS-3E1318P-EI
Product Overview
The Hikvision DS-3E1318P-EI is a 16-port Fast Ethernet smart managed PoE switch designed for medium-sized IP surveillance networks requiring dependable camera power, Gigabit uplink capacity and practical remote management. It provides 16 × 10/100 Mbps PoE ports and two Gigabit combo interfaces, allowing installers to use compatible Gigabit RJ45 or SFP fibre connections for recorders, network switches and backbone links. A 230 W shared PoE budget supports compatible powered devices across the system, while PoE Watchdog can detect and restart cameras that stop responding. The switch also supports visualised network topology, cable diagnostics, 802.1Q VLAN configuration, port isolation and remote maintenance through compatible Hikvision management platforms. Its metal enclosure and rack-mount capability make it well suited to warehouses, offices, retail premises, schools, larger homes and other installations where organised surveillance infrastructure and easier troubleshooting are important.
Key Capabilities
Sixteen Fast Ethernet PoE Connections
Connect and power up to 16 compatible PoE cameras or network devices through individual 10/100 Mbps ports. This reduces the need for separate local power supplies and keeps structured surveillance cabling easier to organise and maintain.
230 W Shared PoE Budget
The 230 W total PoE budget provides useful capacity for multi-camera installations containing devices with different power requirements. Each PoE port supports up to 30 W, subject to the combined system remaining within the overall available budget.
Gigabit Combo Uplinks
Two Gigabit combo interfaces provide flexible RJ45 copper or SFP fibre uplink connectivity for an NVR, another network switch or a fibre backbone. Each combo interface operates through either its RJ45 or corresponding SFP connection rather than both simultaneously.
PoE Watchdog Recovery
PoE Watchdog monitors cameras connected to ports 1 to 16 and can restart devices that stop responding. This can reduce avoidable service visits where a temporary fault only requires the camera to be power-cycled.
Long-Range PoE Mode
Ports 1 to 16 support transmission up to 300 metres in long-range mode. This is useful for distant cameras around warehouses, boundaries and larger properties, subject to the connected camera model and cable condition.
Remote Network Management
Compatible Hikvision platforms can display topology, port rates, bandwidth utilisation, PoE consumption and alarm status. Installers can also restart ports and devices, enable long-range mode and perform supported remote upgrades.
Best For
- Medium-Sized CCTV Networks: Suitable for systems requiring up to 16 directly powered IP cameras or compatible PoE devices.
- Commercial Equipment Racks: The metal enclosure and rack-mount design suit structured communications cabinets and equipment rooms.
- Sites Requiring Fibre Connectivity: The Gigabit combo interfaces provide fibre uplink options when suitable SFP modules and fibre components are selected.
- Remotely Maintained Installations: PoE Watchdog, cable diagnostics and remote management tools help simplify fault finding and ongoing support.
- Long Camera Cable Runs: Long-range mode supports selected installations where standard Ethernet distances are not sufficient.
Why Choose the DS-3E1318P-EI
The DS-3E1318P-EI provides more control and serviceability than a basic unmanaged PoE switch. Its combination of 16 Fast Ethernet PoE ports, two Gigabit combo uplinks and a 230 W PoE budget makes it a practical foundation for organised surveillance networks. The key benefit for many installers is the ability to view network status, monitor PoE consumption, diagnose cable faults and restart an unresponsive camera without immediately attending the site. VLAN support, port isolation and other managed functions provide additional flexibility when the CCTV system shares infrastructure with a broader business network. Available through Security Wholesalers, this model is suited to installations needing manageable PoE distribution, flexible copper or fibre uplinks and ongoing remote support.
Buyer Decision Tips
Buyer Tip: Add together the maximum power requirements of every connected camera or PoE device before installation. Each port supports up to 30 W, but the combined demand across all 16 PoE ports must remain within the switch’s shared 230 W PoE budget.
Buyer Tip: The 16 camera ports operate at 10/100 Mbps rather than Gigabit speed. This is normally sufficient for individual surveillance cameras, while the Gigabit combo interfaces provide higher-capacity uplinks for the recorder and wider network.
Buyer Tip: Long-range mode supports transmission up to 300 metres, but actual performance depends on the camera model and cable condition. Use appropriate network cabling, confirm device suitability and test the complete run before relying on the maximum distance.
Key Features & Technical Specifications
| Product Type |
16-port Fast Ethernet smart managed PoE network switch. |
| PoE Ports |
16 × 10/100 Mbps PoE RJ45 ports. |
| Gigabit Uplinks |
2 × Gigabit combo interfaces supporting compatible RJ45 copper or SFP fibre connections. |
| Combo Port Operation |
The RJ45 and SFP connection within each combo interface share the same logical port and cannot be used simultaneously. |
| PoE Standards |
IEEE 802.3af and IEEE 802.3at. |
| Maximum Port Power |
Up to 30 W per PoE port. |
| Total PoE Budget |
230 W shared across ports 1 to 16. |
| Long-Range PoE |
Up to 300 metres on ports 1 to 16, subject to camera model and cable condition. |
| PoE Watchdog |
Detects and restarts cameras that stop responding on ports 1 to 16. |
| Switching Capacity |
9.2 Gbps whole-device performance; 7.2 Gbps port performance. |
| Packet Forwarding Rate |
6.84 Mpps whole-device performance; 5.36 Mpps port performance. |
| MAC Address Table |
16 K entries. |
| Internal Cache |
4 Mbits. |
| VLAN Support |
Supports IEEE 802.1Q VLAN configuration. |
| Network Functions |
Includes smart managed functions such as port management, topology display, traffic monitoring and port isolation. |
| Cable Diagnostics |
Supports detection of cable length and abnormal open or short circuits. |
| Management |
Web-based management and compatible Hikvision remote network management platforms. |
| Surge Protection |
6 kV surge protection for PoE ports. |
| Power Supply |
100 to 240 V AC, 50/60 Hz. |
| Installation |
Desktop or rack installation. |
| Enclosure |
Metal construction. |
Ideal Use Cases
Warehouses
Centralises PoE connectivity for cameras covering loading docks, aisles, entrances, storage areas and building perimeters.
Retail Premises
Supports multi-camera networks covering shopfloors, stockrooms, counters, entrances and external access areas.
Offices
Suitable for structured camera networks where managed switching, rack installation and traffic separation are useful.
Schools and Campuses
Provides organised power and data distribution for cameras around buildings, corridors, entrances and shared outdoor areas.
Large Residential Properties
A practical option for homes requiring numerous cameras, managed network functions and a structured central switch.
Multi-Building Networks
The Gigabit combo interfaces provide fibre uplink options between communications areas when compatible SFP modules are installed.
Choosing the Right Model
- Choose this model if: The installation requires up to 16 Fast Ethernet PoE connections, a 230 W PoE budget, Gigabit copper or fibre uplinks, rack mounting and smart managed network functions.
- Choose the DS-3E1520P-EI instead if: Every connected camera or device requires a dedicated Gigabit PoE connection rather than 10/100 Mbps connectivity.
- Choose a simpler switch if: The system only uses a small number of low-power devices and does not require VLANs, remote diagnostics, fibre connectivity or managed configuration.
- Choose a larger switch if: More than 16 powered devices are required or the projected PoE load exceeds 230 W after allowing for future expansion.
FAQs
- How many PoE devices can the Hikvision DS-3E1318P-EI connect?
The DS-3E1318P-EI provides 16 Fast Ethernet PoE RJ45 ports, so it can connect and power up to 16 compatible PoE devices directly. Each port supports up to 30 W, while the combined PoE power budget is 230 W. Add together the maximum power demand of every connected device to confirm the total remains within that shared budget.
- Are the PoE ports on the DS-3E1318P-EI Gigabit?
No. Ports 1 to 16 operate at 10/100 Mbps. The switch provides two Gigabit combo interfaces for higher-capacity uplink connections. Fast Ethernet is generally sufficient for individual surveillance cameras, but devices that specifically require Gigabit connectivity should be connected to a suitable Gigabit model.
- Does the DS-3E1318P-EI support long-distance PoE transmission?
Yes. Ports 1 to 16 support transmission up to 300 metres in long-range mode. Actual performance depends on the connected camera model and cable condition. Use suitable network cabling and test the complete link before commissioning the system.
- What uplink connections does the DS-3E1318P-EI provide?
The DS-3E1318P-EI includes two Gigabit combo interfaces. Each interface can use either its RJ45 copper connection or its corresponding SFP fibre connection. The paired RJ45 and SFP connections share the same logical interface and cannot operate independently at the same time.
- Can the DS-3E1318P-EI restart an unresponsive camera automatically?
Yes. PoE Watchdog on ports 1 to 16 can detect and restart cameras that stop responding. This may allow a temporary camera fault to be resolved without manually disconnecting power at the site.
- How can the Hikvision DS-3E1318P-EI be managed?
The DS-3E1318P-EI supports web-based management and compatible Hikvision remote management platforms. Supported functions include viewing port rates, bandwidth utilisation, PoE power usage, topology information and device status.
- Is the DS-3E1318P-EI suitable for rack installation?
Yes. The DS-3E1318P-EI supports structured rack installation and uses a metal enclosure, making it suitable for communications cabinets and equipment rooms.
- What should I check before buying the DS-3E1318P-EI?
Check the number of required PoE connections, the combined power demand of all connected devices, whether 10/100 Mbps camera ports are sufficient and whether copper or fibre uplinks are needed. The DS-3E1318P-EI is available through Security Wholesalers for systems matching its 16-port layout and 230 W PoE budget.
Additional Information
Hikvision DS-3E1318P-EI Product Information
